Show Tec COMPACT POWER LIGHTSET RGB-UV V1 User manual

Compact Power Lightset RGB-UV V1
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 30278
MANUAL
ENGLISH

1
Ordercode: 30278
Compact Power Lightset RGB-UV
Table of contents
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................3
Operating Determinations ..........................................................................................................................................4
Rigging ............................................................................................................................................................................4
Connection with the mains.........................................................................................................................................5
Return Procedure..........................................................................................................................................................6
Claims..............................................................................................................................................................................6
Description of the device.................................................................................................................................................7
Overview ........................................................................................................................................................................8
Installation...........................................................................................................................................................................9
Set Up and Operation .......................................................................................................................................................9
Control Modes...............................................................................................................................................................9
One Compact Power Lightset (Auto, Manual) ...................................................................................................9
One Compact Power Lightset (Sound-controlled).............................................................................................9
Multiple Compact Power Lightsets (Master/Slave Mode).................................................................................9
Multiple Compact Power Lightsets (DMX Control) ...........................................................................................10
Fixture Linking...............................................................................................................................................................11
Data Cabling...............................................................................................................................................................11
Control Panel ...............................................................................................................................................................12
Control Mode ..............................................................................................................................................................12
DMX Addressing ..........................................................................................................................................................12
Menu Overview...........................................................................................................................................................13
Main Menu Options....................................................................................................................................................14
1. Auto Mode............................................................................................................................................................14
1.1 PAR / Derby mode ............................................................................................................................................14
1.2 Mix mode ............................................................................................................................................................14
1.3 Flash mode .........................................................................................................................................................15
2. Sound-controlled .................................................................................................................................................15
2.1 PAR / Derby mode ............................................................................................................................................15
2.2 Mix mode ............................................................................................................................................................15
2.3 Flash mode .........................................................................................................................................................15
3. Manual Mode.......................................................................................................................................................15
4. Master / Slave Mode...........................................................................................................................................16
5. DMX Mode ............................................................................................................................................................16
6. Settings...................................................................................................................................................................16
7. Footswitch Function (footswitch included!) ...................................................................................................17
DMX Channels .............................................................................................................................................................18
4 Channels ................................................................................................................................................................18
8 channels .................................................................................................................................................................19
25 channels...............................................................................................................................................................20
Maintenance....................................................................................................................................................................23
Replacing the Fuse.....................................................................................................................................................23
Troubleshooting ...............................................................................................................................................................23
No Light.........................................................................................................................................................................23
No Response to DMX..................................................................................................................................................24
Product Specifications....................................................................................................................................................25
Dimensions........................................................................................................................................................................26

2
Ordercode: 30278
Compact Power Lightset RGB-UV
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
Showtec Compact Power LIghtset
RGB-UV
IEC power cable (4,70 m)
2 adjustment screws
2 mounting brackets
2 carrying bags
Tripod
User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.

3
Ordercode: 30278
Compact Power Lightset RGB-UV
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never lift the fixture holding it by the projector-head, as the mechanics may be damaged. Always
hold the fixture by the transport handles.
Never place any material over the lens.
Never look directly into the light source.
Never leave any cables lying around.
Never loosen the screws of the rotating gobo otherwise you risk opening of the ball bearing.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this will reduce the device’s life.
Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
Do not shake the device. Avoid brute force when installing or operating the device.
Only use the device indoors, avoid contact with water or other liquids.
Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly
fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep the case closed while operating.
Always allow a free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
If the lens is obviously damaged, it has to be replaced.
If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.

4
Ordercode: 30278
Compact Power Lightset RGB-UV
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Moving head must be installed beyond the reach of children. Never leave the unit
running unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the Compact Power Lightset. The
manufacturer will not accept liability for damages caused by the misuse or incorrect installation of
this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
Operating Determinations
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
The maximum ambient temperature ta= 40°C must never be exceeded.
The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
●If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used.
●Use a clamp to mount the projector, with the mounting-bracket, to the trussing system.
●The projector must never be fixed swinging freely in the room.
●The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
a safety cable.
●When rigging, derigging or servicing the projector, always make sure that the area below the
installation is unavailable for any unauthorized persons.

5
Ordercode: 30278
Compact Power Lightset RGB-UV
The Compact Power Lightset RGB-UV can be fitted to a wall with mounting brackets or mounted to a
tripod.
Improper installation can cause serious injuries and damage of property !
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always connected properly to the earth!

6
Ordercode: 30278
Compact Power Lightset RGB-UV
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

7
Ordercode: 30278
Compact Power Lightset RGB-UV
Description of the device
Features
The Compact Power Lightset RGB-UV is a lightset which combines a traditional lightset with extra effects.
It offers 4 LED strobes in order to create an extra effect to your show. Moreover the parcans are
equipped with UV Led' as well in order to create creepy blacklight effects.
The Compact Power Lightset RGB-UV can be controlled by DMX or by the foot controller which is
included. In order to make the set plug-and-play, a carrying bag and stand are included.
Input Voltage: 100-240V, 60/50Hz
Power consumption: 45W
Built-in strobe and UV LEDs for extra effect
Control modes: Auto, Manual mode, Sound-controlled, Master/Slave, DMX
Sound-controlled via built-in microphone
DMX-controlled via DMX controller
DMX modes: 4, 8, 25 channels
Clear 4-digit LED display for easy setup
Strong metal housing
Light source:
Strobe: 4x 1W White, 4x 1W UV
0 –18Hz, Current
300mA
LED Spot: 4-in-1 RGB-UV LEDs
Lux@2m: 1205
Colors: RGB-UV
Power: 6x8W 4-in-1
Current: 350mA
Beam angle: 15°
Power Connection: IEC 100-240V (IN & OUT)
Data Connector: 3-pin XLR (IN/OUT)
Cooling: Convection (no fans) which eliminates the emission of noise
Working temperature: -10°C - 40°C
Footswitch frequency: 433mHz
Footswitch unobstructed Range: 30m
Fuse 1,5L/250V
Dimensions: 1032 x 457 x 145 mm (LxWxH) (excl. tripod)
Weight: 4,9 kg (excl. tripod)
Included: wireless foot controller, 2 adjustment screws, 2 mounting brackets, carrying bags, IEC
power cable, tripod/stand included
Tripod
Height: 1,25 –2,5 m
Footspace: 1,0 m
Weight: 3,2 kg
Optional Accessory
V23GA 12V Battery for remote controllers, ordercode SPAC0000

8
Ordercode: 30278
Compact Power Lightset RGB-UV
Overview
Fig. 01
01) 4-in-1 RGB-UV LEDs
02) 4x 1W White, 4x 1W UV
03) Built-in Microphone
04) IR sensor (Not functional)
Fig. 02
05) 3-pin DMX signal connector OUT
06) 3-pin DMX signal connector IN
07) Ground/earth connection
08) IEC power connector 100-240V OUT
09) IEC power connector 100-240V IN + Fuse 1,5L/250V
10) Audio Sensitivity
11) WDMX Antenna for Wireless Footpedal
12) 4-digit LED display + control buttons
13) IR sensor (Not functional)

9
Ordercode: 30278
Compact Power Lightset RGB-UV
Installation
Remove all packing materials from the Compact Power Lightset RGB-UV. Check if all foam and plastic
padding is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply. The device can be sound-controlled as it is equipped
with a built-in microphone.
Control Modes
There are 5 modes:
Auto Mode
Manual Mode (Static Color Mode)
Sound-controlled
Master/Slave
DMX-512
One Compact Power Lightset (Auto, Manual)
01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Compact Power Lightset is not connected with a DMX-cable, it functions as a stand-alone
device.
05) Please see pages 14-16 for more information about the Auto Mode and Manual Mode.
One Compact Power Lightset (Sound-controlled)
01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Compact Power Lightset is not connected with a DMX-cable, it functions as a stand-alone
device.
05) Please see page 14 for more information about the Sound-controlled Mode.
Multiple Compact Power Lightsets (Master/Slave Mode)
01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-pin XLR cable to connect the Compact Power Lightset.
The pins:
01) Earth
02) Signal (-)
03) Signal (+)
05) Link the units as shown in Fig. 02, connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. You can
use the same functions on the master device as described on pages 14-16 (Built-in, Auto or Sound-
controlled). This means that you can set your desired operation mode on the master device and all
slave devices will react the same as the master device.

10
Ordercode: 30278
Compact Power Lightset RGB-UV
Multiple Compact Power Lightsets Master/Slave Set Up
Fig. 02
Multiple Compact Power Lightsets (DMX Control)
01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-p XLR cable to connect the Compact Power Lightset and other devices.
05) Link the units as shown in Fig. 03, Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
06) Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first
unit. Do not supply power before the whole system is set up and connected properly.
Multiple Compact Power Lightsets DMX Set Up
Fig. 03
Note: Link all cables before connecting electric power

11
Ordercode: 30278
Compact Power Lightset RGB-UV
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy chained in one single line. To comply with the
EIA-485 standard no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of fixtures on a DMX data link: 30 fixtures
Maximum recommended number of fixtures on a power link: 5 fixtures @ 100V
Maximum recommended number of fixtures on a power link: 9 fixtures @ 240V
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio Certified DMX Data Cables
•DAP Audio cable for all-round use. bal. XLR/M 3 p. > XLR/F 3 p.
Ordercode FL01150 (1,5m.), FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115 (15m.), FL0120 (20m.).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m.).

12
Ordercode: 30278
Compact Power Lightset RGB-UV
Control Panel
A) LED display
B) MODE button
C) UP button
D) DOWN button
E) ENTER button
Fig. 04
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller (when you select the DMX address and save it,
the controller will display the saved DMX address the next time).
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is the
first channel from which the Compact Power Lightset will respond to the controller.
Please note when you use the controller, the unit has 25 channels.
When using multiple Compact Power Lightsets, make sure that you set the DMX addresses right.
Therefore, the DMX address of the first Compact Power Lightset should be 1(d001); the DMX address of
the second Compact Power Lightset should be 1+25=26 (d026); the DMX address of the third Compact
Power Lightset should be 26+25=51 (d051), etc.
Please, be sure that you do not have any overlapping channels in order to control each Compact Power
Lightset RGB-UV correctly.
If two or more Compact Power Lightsets are addressed similarly, they will work similarly.
Controlling:
After having addressed all Compact Power Lightset fixtures, you may now start operating these via your
lighting controller.
Note: After switching on, the Compact Power Lightset will automatically detect whether DMX-512 data is
received or not. If there is no data received at the DMX-input, the ”LED”on the control panel will not
flash.
The problem may be:
The XLR cable from the controller is not connected with the input of the Compact Power Lightset.
The controller is switched off or defective, the cable or connector is defective, or the signal wires are
swapped in the input connector.
Note: It is necessary to insert an XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
Display Off after 10 seconds
When no button is pressed for 10 seconds, the display will turn off.
To light up the display, you have to press the MODE, UP, DOWN or ENTER button.
Once you have pressed the button, the display will light up.

13
Ordercode: 30278
Compact Power Lightset RGB-UV
Menu Overview

14
Ordercode: 30278
Compact Power Lightset RGB-UV
Main Menu Options
Auto Mode
Sound-controlled Mode
Manual Mode (Static Color Mode)
Master/Slave Mode
DMX-512 Mode
Settings
The Compact Power Lightset will only show its version number at start-up !
1. Auto Mode
With this menu you can you can set the built-in programs.
01) Press the MODE button on the device, until the display shows .
02) Press the ENTER button to open this menu.
03) You can use the Up / Down buttons to scroll through the 3 built-in programs.
PAR / Derby mode
Mix mode
Flash mode
1.1 PAR / Derby mode
01) Use the Up / Down buttons to choose a mode .
02) You can use the ENTER button to change the settings.
03) Use the Up / Down buttons to change the PAR / Derby mode from .
04) You can use the ENTER button to change the settings.
05) Use the Up / Down buttons to change the strobe speed from .
1.2 Mix mode
01) Use the Up / Down buttons to choose a mode .
02) You can use the ENTER button to change the settings.
03) Use the Up / Down buttons to change the Mix mode from .
04) You can use the ENTER button to change the settings.
05) Use the Up / Down buttons to change the strobe speed from .

15
Ordercode: 30278
Compact Power Lightset RGB-UV
1.3 Flash mode
01) Use the Up / Down buttons to choose a mode .
02) You can use the ENTER button to change the settings.
03) Use the Up / Down buttons to change the Flash mode from .
04) You can use the ENTER button to change the settings.
05) Use the Up / Down buttons to change the strobe speed from .
2. Sound-controlled
With this menu you can you can set the device to sound-control.
01) Press the MODE button on the device, until the display shows .
02) Press the ENTER button to open this menu.
03) You can use the Up / Down buttons to scroll through the 4 sound-controlled programs.
PAR / Derby mode
Mix mode
Flash mode
2.1 PAR / Derby mode
01) Use the Up / Down buttons to choose .
02) You can use the ENTER button to change the settings.
03) Use the Up / Down buttons to change the PAR / Derby mode from .
2.2 Mix mode
01) Use the Up / Down buttons to choose .
02) You can use the ENTER button to change the settings.
03) Use the Up / Down buttons to change the Mix mode from .
2.3 Flash mode
01) Use the Up / Down buttons to choose .
02) You can use the ENTER button to change the settings.
03) Use the Up / Down buttons to change the Flash mode from .
3. Manual Mode
With this menu you can you can manually set a desired color.
01) Press the MODE button on the device, until the display shows .
02) Press the ENTER button to open the menu.
03) You can use the ENTER button to scroll through the 4 color options and set the speed.
Set the value of the red LEDs (000-255).
Set the value of the green LEDs (000-255).
Set the value of the blue LEDs (000-255).
Set the value of the UV LEDs (000-255).
Set the strobe speed (01-99).
04) Use the Up / Down buttons to change the values.
You can combine Red, Green, Blue and UV to create an infinite range of colors (000-255).

16
Ordercode: 30278
Compact Power Lightset RGB-UV
4. Master / Slave Mode
01) Use the Up / Down buttons to choose a mode .
02) You can use the ENTER button to set the Compact Power Lightset to .
5. DMX Mode
With this menu you can you can select the DMX mode, and set the DMX address.
01) Press the MODE button on the device, until the display shows .
02) Press the ENTER button to open the menu.
03) Press the ENTER button to open this menu.
The Compact Power Lightset has 3 different DMX modes.
04) You can use the Up / Down buttons to scroll through the 3 programs.
05) You can use the ENTER button to select a DMX mode, and set the DMX address.
Set the address from d001-d509 (04CH).
Set the address from d001-d505 (08CH).
Set the address from d001-d488 (25CH).
06) Use the Up / Down buttons to change the values.
6. Settings
With this menu you can you can enter the settings.
01) Press the MODE button on the device, until the display shows .
02) Press the ENTER button to open this menu.
Display On / Off
Factory Reset
Wireless Pedal On / Off
03) You can use the Up / Down buttons to scroll through the 3 settings.
04) You can use the ENTER button to select the display on / off function .
05) Use the Up / Down buttons to set the display on / off function .
If switched on, the display wil turn off after 30sec.
06) You can use the ENTER button to select the factory reset .
07) You can use the ENTER button to confirm.
08) You can use the ENTER button to select the wireless pedal on / off function .
09) Use the Up / Down buttons to set the wireless pedal on / off function .

17
Ordercode: 30278
Compact Power Lightset RGB-UV
7. Footswitch Function (footswitch included!)
01) Insert a V23GA 12V battery (ordercode SPAC0000) into the bottom of the footpedal.
02) Put the antenna of the footpedal in the upright position.
03) First make sure the Power Lightset has the correct settings:
04) Step on the Auto pedal to enter the auto running mode.
05) Press and hold the Auto pedal for 0,5 second at a time, to scroll trough the Auto Run menu.
You can see on the LED display (page 8, nr 12) which Auto Run mode is active.
The range is:
06) Step on the Music pedal to enter the sound active mode.
07) Press and hold the Music pedal for 0,5 second at a time, to scroll trough the Music Run menu.
You can see on the LED display (page 8, nr 12) which Music Run mode is active.
The range is:
08) Step on the Color pedal to enter the color mode. Press and hold the Auto pedal for 0,5 second at a
time, to scroll trough the Color menu. You can choose 24 preset colors.
09) Step on the Blackout pedal to turn off all lights and then step on it again to enter the previous mode.
Fig. 05

18
Ordercode: 30278
Compact Power Lightset RGB-UV
DMX Channels
4 Channels
Channel 1 –MIX Show
0-5
Blackout
6-86
AM01/SM01
87-169
AM02/SM02
170-255
AM03/SM03
Note：when CH1 is set to black out, CH2, CH3 will work.
Channel 2 –PAR Show
0-5
Blackout
6-21
AP01/SP01
22-38
AP02/SP02
39-54
AP03/SP03
55-71
AP04/SP04
72-87
AP05/SP05
88-104
AP06/SP06
105-120
AP07/SP07
121-137
AP08/SP08
138-153
AP09/SP09
154-170
AP10/SP10
171-186
AP11/SP11
187-203
AP12/SP12
204-220
AP13/SP13
221-236
AP14/SP14
237-255
AP15/SP15
Channel 3 –FLASH Show
0-5
Blackout
6-25
AF01/SF01
26-46
AF02/SF02
47-66
AF03/SF03
67-87
AF04/SF04
88-107
AF05/SF05
108-128
AF06/SF06
129-148
AF07/SF07
149-169
AF08/SF08
170-189
AF09/SF09
190-210
AF10/SF10
211-230
AF11/SF11
231-255
AF12/SF12
Channel 4 –Running Speed
0-250
Running speed SLOW to fast
251-255
Sound program

19
Ordercode: 30278
Compact Power Lightset RGB-UV
8 channels
Channel 1 –Red ( Dimmer must be open )
0-255
Gradual adjustment Red, from 0-100%
Channel 2 –Green ( Dimmer must be open )
0-255
Gradual adjustment Green, from 0-100%
Channel 3 –Blue ( Dimmer must be open )
0-255
Gradual adjustment Blue, from 0-100%
Channel 4 –UV ( Dimmer must be open )
0-255
Gradual adjustment UV, from 0-100%
Channel 5 –Master Dimmer
0-255
Gradual adjustment, from 0-100%
Channel 6 –Strobe
0-250
Flash frequency, from slow to fast
251-255
Sound-controlled Flash frequency
Channel 7 –FLASH Show
0-5
Blackout
6-25
AF01/SF01
26-46
AF02/SF02
47-66
AF03/SF03
67-87
AF04/SF04
88-107
AF05/SF05
108-128
AF06/SF06
129-148
AF07/SF07
149-169
AF08/SF08
170-189
AF09/SF09
190-210
AF10/SF10
211-230
AF11/SF11
231-255
AF12/SF12
Channel 8 –Running Speed
0-250
Running speed SLOW to fast
251-255
Sound program