Show Tec ColorCue 1 AIR User manual

ColorCue 1 AIR
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Product code: 50707
USER MANUAL
ENGLISH
V1

1
ColorCue 1 AIR
Product code: 50707
Preface
Thank you for purchasing this Showtec product.
The purpose of this user manual is to provide instructions for the correct and safe use of this product.
Keep the user manual for future reference as it is an integral part of the product. The user manual shall be
stored at an easily accessible location.
This user manual contains information concerning:
●Safety instructions
●Installation and operation of the device
●Intended and non-intended use of the device
●Maintenance procedures
●Troubleshooting
●Transport, storage and disposal of the device
Non-observance of the instructions in this user manual may result in serious injuries and damage of
property.
©2023 Showtec. All rights reserved.
No part of this document may be copied, published or otherwise reproduced without the prior written
consent of Highlite International.
Design and product specifications are subject to change without prior notice.
For the latest version of this document or other language versions, please visit our website
www.highlite.com or contact us at [e-mail].
Highlite International and its authorized service providers are not liable for any injury, damage, direct or
indirect loss, consequential or economic loss or any other loss arising from the use of, or inability to use or
reliance on the information contained in this document.

2
ColorCue 1 AIR
Product code: 50707
Table of contents
1. Introduction..........................................................................................................................................................4
Before Using the Product ..................................................................................................................................4
Intended Use .......................................................................................................................................................4
Product Lifespan.................................................................................................................................................4
Text Conventions ................................................................................................................................................4
Symbols and Signal Words................................................................................................................................5
Symbols on the Information Label ..................................................................................................................5
2. Safety ....................................................................................................................................................................6
Warnings and Safety Instructions ....................................................................................................................6
Requirements for the User.................................................................................................................................7
3. Description of the Device ...................................................................................................................................8
Top View ..............................................................................................................................................................8
Back View ............................................................................................................................................................9
Product Specifications ....................................................................................................................................10
Optional Accessories.......................................................................................................................................11
Dimensions.........................................................................................................................................................11
Mounting Dimensions ............................................................................................................................11
4. Installation ..........................................................................................................................................................12
Installation Site Requirements ........................................................................................................................12
Mounting............................................................................................................................................................12
Charging the Battery.......................................................................................................................................12
Battery Statuses.......................................................................................................................................13
5. Setup ...................................................................................................................................................................14
Warnings and Precautions .............................................................................................................................14
DMX Connection..............................................................................................................................................14
DMX-512 Protocol...................................................................................................................................14
DMX Cables.............................................................................................................................................14
Setup Options....................................................................................................................................................15
Wired DMX Setup....................................................................................................................................15
Wireless DMX Setup ................................................................................................................................16
Connecting to Power Supply.........................................................................................................................17
Switching On .....................................................................................................................................................17
Linking (Wireless DMX) .....................................................................................................................................17
6. Operation ...........................................................................................................................................................18
Safety Instructions for Operation...................................................................................................................18
Setup Mode.......................................................................................................................................................18
Operating Modes.............................................................................................................................................19
Manual Mode .........................................................................................................................................19
Static Colors Mode.................................................................................................................................19
Preset Colors Mode............................................................................................................................19
User Colors Mode ...............................................................................................................................20
Chase Mode ...........................................................................................................................................20
Preset Chase Mode ...........................................................................................................................20
User Chase Mode...............................................................................................................................21
Operating Functions ........................................................................................................................................21
Strobe........................................................................................................................................................21
Blackout ...................................................................................................................................................21
Chase Playback .....................................................................................................................................21
Cancel a Selection ................................................................................................................................22
Programming Mode ........................................................................................................................................22
Record a Color .......................................................................................................................................22
Delete a Color.........................................................................................................................................22
Record a Chase Step ............................................................................................................................23

3
ColorCue 1 AIR
Product code: 50707
Add a Chase Step to an Existing Chase............................................................................................23
Delete a Chase Step .............................................................................................................................24
Delete a Chase.......................................................................................................................................24
Factory Reset ....................................................................................................................................................24
7. Troubleshooting .................................................................................................................................................25
8. Maintenance .....................................................................................................................................................26
Preventive Maintenance................................................................................................................................26
Basic Cleaning Instructions ...................................................................................................................26
Corrective Maintenance................................................................................................................................26
9. Deinstallation, Transportation and Storage ....................................................................................................27
Instructions for Transportation ........................................................................................................................27
Storage...............................................................................................................................................................27
10. Disposal ..............................................................................................................................................................27
11. Approval.............................................................................................................................................................27

4
ColorCue 1 AIR
Product code: 50707
1. Introduction
Before Using the Product
Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your
Highlite International dealer.
Your shipment includes:
●Showtec ColorCue 1 AIR
●AC power adapter with
4 interchangeable AC plugs
(Europe, UK, US/JP, AUS/NZ)
●User manual
Fig. 01
Intended Use
This device is intended for use as a wireless LED DMX controller. It is suitable only for indoor installation. It is
not suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Product Lifespan
This device is not designed for permanent operation. Disconnect the device from the electrical power
supply when the device is not in operation. This will reduce the wear and will improve the device’s
lifespan.
Text Conventions
Throughout the user manual the following text conventions are used:
●References: References to chapters and parts of the device are in bold lettering, for example:
“Refer to 2. Safety”, “press the power switch (03)”
●0–255: Defines a range of values
●Notes: Note: (in bold lettering) is followed by useful information or tips

5
ColorCue 1 AIR
Product code: 50707
Symbols and Signal Words
Safety notes and warnings are indicated throughout the user manual by safety signs.
Always follow the instructions provided in this user manual.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
Indicates an imminently hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
Attention
Indicates important information for the correct operation and use of the
product.
Important
Read and observe the instructions in this document.
Provides important information about the disposal of this product.
Symbols on the Information Label
This product is provided with an information label. The information label is located on the bottom plate of
the device.
The information label contains the following symbols:
This device is designed for indoor use.
Read and follow the instructions in the user manual before installing, operating or
servicing the device.
This device falls under IEC protection class II.
This device shall not be treated as household waste.

6
ColorCue 1 AIR
Product code: 50707
2. Safety
Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
Warnings and Safety Instructions
DANGER
Danger for children
For adult use only. The device must be installed beyond the reach of children.
●Do not leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within
children’s reach. Packaging material is a potential source of danger for children.
DANGER
Risk of explosion caused by incorrect handling
This device contains a built-in rechargeable lithium-ion battery. The battery is not replaceable. The
battery may explode or cause burns if it is crushed, disassembled or exposed to fire or high temperatures.
●Do not open the device and do not attempt to remove the built-in battery.
●Do not disassemble the battery.
●Do not crush or puncture the battery.
●Do not short-circuit the battery.
●Do not expose the battery to water or other liquids.
●Keep the battery away from fire and heat.
Attention
Incorrect handling of the AC power adapter may result in hazardous situations
This device is delivered with an AC power adapter. Incorrect handling of the AC power adapter may
result in hazardous situations.
●Use only the AC power adapter delivered with the device.
●Do not wrap the power cable around the power adapter or any other object. This can damage the
internal wires.
●Do not cover the power adapter with anything when it is plugged into the socket-outlet. This may
cause overheating.
●Do not expose the power adapter to water or other liquids.
Do not use the power adapter:
●If it shows signs of overheating, for example the plastic is damaged
●If the AC input pins show signs of corrosion or overheating
●If the power cable is damaged or shows signs of material fatigue.

7
ColorCue 1 AIR
Product code: 50707
Attention
General safety
●Do not shake the device. Avoid brute force when installing or operating the device.
●If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it
on immediately. Let the device reach room temperature before switching it on, otherwise it may be
damaged by the formed condensation.
Attention
This device shall be used only for the purposes it is designed for.
This device is designed to be used as a wireless LED DMX controller. Any incorrect use may lead to
hazardous situations and result in injuries and material damage.
This device does not contain user-serviceable parts. Unauthorized modifications to the device will render
the warranty void. Such modifications may result in injuries and material damage.
Attention
Do not expose the device to conditions that exceed the rated IP class conditions.
This device is IP20 rated. IP (Ingress Protection) 20 class provides protection against solid objects greater
than 12 mm, such as fingers, and no protection against harmful ingress of water.
Requirements for the User
This product may be used by ordinary persons. Maintenance and installation may be carried by ordinary
persons. Service shall be carried out only by instructed or skilled persons. Contact your Highlite
International dealer for more information.
Instructed persons have been instructed and trained by a skilled person, or are supervised by a skilled
person, for specific tasks and work activities associated with the service of this product, so that they can
identify risks and take precautions to avoid them.
Skilled persons have training or experience, which enables them to recognize risks and to avoid hazards
associated with the service of this product.
Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons
include not only users of the product but also any other persons that may have access to the device or
who may be in the vicinity of the device.

8
ColorCue 1 AIR
Product code: 50707
3. Description of the Device
The Showtec ColorCue 1 AIR is a LED DMX controller with wireless DMX, featuring 1 master fader, 6 color
rotary encoders and 12 memory buttons for colors/chases/user presets. You can use the device to
control the light output of LED fixtures with up to 6 colors (RGBWA-UV), suitable for any venue. The device
has 12 customizable preset colors and 12 fixed colors. You can create up to 12 programs (chases), each
with up to 99 steps. Control the chases in Manual, Auto or Sound-controlled mode. Thanks to the
presence of wireless DMX and of the internal battery (good for up to 12 hours of operation), you do not
need to use power or DMX cables to operate the device.
Top View
Fig. 02
A) Colors/Chases buttons with LEDs (1)–(12)
B) Master fader
C) Function buttons with LEDs (19)–(24)
D) Red/Direction control
E) Green/Speed control
F) Blue/Fade control
G) White/Sound control
H) Amber/Strobe control
I) UV control
J) Blackout button
K) Playback button
L) Mode buttons (13)–(16)

9
ColorCue 1 AIR
Product code: 50707
Back View
Fig. 03
M) Antenna
N) Wireless Link/Unlink button
O) Battery LED indicator
P) USB connector (no function)
Q) Microphone
R) 3-pin DMX connector OUT
S) DC input connector (9–12 V DC, 800 mA)
T) Power switch (ON/OFF)

10
ColorCue 1 AIR
Product code: 50707
Product Specifications
Model:
ColorCue 1 AIR
Electrical:
Input voltage:
9–12 V DC, 800 mA
Power consumption:
10 W
Audio triggers:
1
AC power adapter:
Input voltage:
100–240 V AC, 50/60 Hz
Input current:
0,5 A max
Output voltage:
12 V DC
Output current:
1,5 A
Physical:
Dimensions:
258 x 150 x 79 mm (L x W x H)
Rack units:
3 U
Installation depth:
79 mm
Weight:
1,1 kg
Operation and control:
Control modes:
Built-in programs, Manual, Sound, Static dimmer
DMX channels:
6 channels
Faders:
1
Buttons:
25
Memories:
1212
Control protocol:
DMX-512, wireless DMX
Wireless Specifications:
Wireless mode:
G3
Carrier frequency:
2,4 GHz
Gain:
10 mW
Reaction time:
8 ms
Antenna type:
Omni
Antenna radiation:
360° x 360°
Battery:
Battery type:
Lithium-ion
Battery voltage:
3,7 V
Capacity:
2,6 Ah
Runtime (@full):
10 h
Runtime average:
12 h
Charging time:
6 h
Connections:
Power connection:
DC input connector
Input connections:
USB input connector (no function)
Output connections:
3-pin DMX connector OUT
Construction:
Housing:
Metal
Color:
Gray
IP rating:
IP20
Thermal:
Maximum ambient temperature ta:
40 °C
Minimum ambient temperature ta:
-5 °C

11
ColorCue 1 AIR
Product code: 50707
Optional Accessories
There is a flight case available for the ColorCue 1 AIR. Purchase the flight case separately.
You need to remove the accessory bay of the flight case. Otherwise, the device does not fit in the flight
case.
●D7405 (Case for ColorCue 1)
You can replace the antenna (M) with one of the 2 antennas that extend the wireless range of the
device. Purchase the antenna(s) separately.
●50155 (Indoor Omni Antenna –2,4 GHz, 5 dBi)
●50157 (Indoor Omni Antenna –2,4 GHz, 7 dBi)
Dimensions
Fig. 04
Mounting Dimensions
Fig. 05

12
ColorCue 1 AIR
Product code: 50707
4. Installation
Installation Site Requirements
●The device must be installed only indoors.
●The device can be positioned on a stable, flat surface, or mounted vertically or horizontally in an
opening.
●The device can be operated from the flight case. See 3.4. Optional Accessories on page 11.
●The maximum ambient temperature ta= 40 °C must never be exceeded.
●The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
Mounting
The device can be mounted vertically or horizontally in an opening. Make sure that there is enough
space for ventilation and for the connected cables. See 3.5.1. Mounting Dimensions on page 11.
Fasten the device with 4 screws to the mounting surface.
Charging the Battery
DANGER
Risk of explosion caused by incorrect handling
This device contains a built-in rechargeable lithium-ion battery. The battery is not replaceable. The
battery may explode or cause burns if it is crushed, disassembled or exposed to fire or high temperatures.
●Do not open the device and do not attempt to remove the built-in battery.
●Do not crush or puncture the battery.
This device is delivered with an AC power adapter that is used to charge the battery. Before connecting
the power adapter to the socket-outlet, make sure that the power supply matches the input voltage
specified on the AC power adapter.
To charge the battery follow the steps below:
Press the power switch (T) to ON position.
Connect the AC power adapter to DC input connector (S). Use only the AC power adapter
delivered with the device.
Connect the AC power adapter to the socket-outlet.
The battery LED indicator (O) changes colors depending on the battery status. See 4.3.1. Battery Statuses
on page 13.
●Charge the battery before using the device for the first time.
●Do not deep discharge the battery as this will shorten the battery’s lifetime. Recharge the battery as
early as possible. Do not let the device operate until the battery is depleted.
●Make sure that the battery is charged to at least 50 % before storing the device.
It is recommended to charge the device at an ambient temperature between 0 °C and 35 °C.
Refer to 3.3. Product Specifications on page 10 for the charge time of the battery.

13
ColorCue 1 AIR
Product code: 50707
Battery Statuses
The battery LED indicator (O) shows the status of the lithium-ion battery:
LED color
LED behavior
Status
Red
Lights up
Battery is almost depleted
Orange
Lights up
Battery is low
Green
Lights up
Battery is (fully) charged

14
ColorCue 1 AIR
Product code: 50707
5. Setup
Warnings and Precautions
Attention
Connect all data cables before supplying power.
Disconnect power supply before connecting or disconnecting data cables.
DMX Connection
DMX-512 Protocol
DMX-512 is a communication protocol used to control stage lighting and effects.
Devices on a serial data link must be daisy-chained in a single line. To comply with the TIA-485 standard,
no more than 32 devices should be connected on one data link.
In order to connect more than 32 devices on one data link, you can use a DMX optically isolated
splitter/booster. If no splitter/booster is used, this may result in deterioration of the DMX signal.
DMX Cables
Shielded twisted-pair cables with 3-pin XLR connectors must be used for reliable DMX connection. You
can purchase DMX cables directly from your Highlite International dealer or make your own cables.
If you use XLR audio cables for DMX data transmission, this may lead to signal degradation and unreliable
operation of the DMX network.
When you make your own DMX cables, make sure that you connect the pins and wires correctly as
shown in Fig. 06.
Fig. 06

15
ColorCue 1 AIR
Product code: 50707
Setup Options
You can use the device to control lighting fixtures in 2 ways:
●with wired DMX: 1 lighting fixture with up to 6 channels (RGBWA-UV). See 5.3.1. Wired DMX
Setup on page 15.
●with wireless DMX: Multiple lighting fixtures. See 5.3.2. Wireless DMX Setup on page 16.
Wired DMX Setup
To connect the device in a wired DMX setup, follow the steps below:
Use a DMX cable to connect the 3-pin DMX connector OUT (R) to the DMX IN connector of the
lighting fixture.
Power the device. See 5.4. Connecting to Power Supply on page 17.
Switch on the device. See 5.5. Switching On on page 17.
Power the lighting fixture.
Fig. 07

16
ColorCue 1 AIR
Product code: 50707
Wireless DMX Setup
To link the device to multiple lighting fixtures in a wireless DMX setup, follow the steps below:
Power the device. See 5.4. Connecting to Power Supply on page 17.
Switch on the device. See 5.5. Switching On on page 17.
Put the antenna (M) in upright position.
Power the lighting fixtures.
Activate wireless DMX on the lighting fixtures.
Set the DMX starting address of the lighting fixtures to 001.
Link the device with the lighting fixtures. See 5.6. Linking (Wireless DMX) on page 17.
Fig. 08

17
ColorCue 1 AIR
Product code: 50707
Connecting to Power Supply
Attention
Incorrect handling of the AC power adapter may result in hazardous situations
This device is delivered with an AC power adapter. Incorrect handling of the AC power adapter may
result in hazardous situations.
Connect the device to the socket-outlet with the delivered AC power adapter. Use only the AC power
adapter delivered with the device.
Switching On
The device has a power switch.
●Press the power switch (T) in ON position to switch on the ColorCue 1 AIR.
●Press the power switch (T) in OFF position to switch off the ColorCue 1 AIR.
Linking (Wireless DMX)
You can link the device with lighting fixtures that have a wireless DMX receiver.
Before linking, make sure that the lighting fixtures are not linked with any other transmitter. Otherwise, it
will not be possible to link the lighting fixtures.
The device has a wireless link/unlink button (N).
●To link the devices, press the wireless link/unlink button (N) once.
●To unlink the devices, press and hold down the wireless link/unlink button (N) for 3 seconds.
The LED indicator on the wireless link/unlink button (N) shows the wireless DMX status:
LED color
LED behavior
Status
Red
Flashing
Unlinked
Red, Blue
Flashing
Linking in progress
Blue
Lights up
The device is sending wireless DMX signal
Note:
The LED indicator on the wireless link/unlink button (N) does not show if the device is linked to any fixture.

18
ColorCue 1 AIR
Product code: 50707
6. Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for use as a wireless LED DMX controller. It is suitable only for indoor installation. It is
not suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Setup Mode
In this mode you can select the type of the LEDs of the connected lighting fixture(s).
Fig. 09
01) Press and hold down the MANUAL/SETUP button (24) for 3 seconds. The LED on the button starts
blinking.
02) Press one of the following 6 buttons to select the LEDs type of the fixture:
●(1) RGB
●(2) RGBW
●(3) RGBA
●(4) RGBWA
●(5) RGBWA-UV (default setting)
●(6) RGBW-UV
The LED on the selected button lights up.
03) Press and hold down the MANUAL/SETUP button (24) for 3 seconds to exit setup mode. The LED on the
button stops blinking.

19
ColorCue 1 AIR
Product code: 50707
Operating Modes
The device has 3 operating modes:
●Manual
●Static Colors (preset/user colors)
●Chase Mode (preset/user chases)
Manual Mode
In this mode you can adjust the intensity of the colors (red, green, blue, white, amber and UV) of the
connected fixtures.
To adjust the intensity of the colors:
Press the MANUAL/SETUP button (24) to enter Manual mode. The LED on the button lights up.
Turn the controls (D)–(I) to select a color.
Note:
If you want to clear a selection, press the CLEAR button (23).
Press the MANUAL/SETUP button (24) again to exit Manual mode. The LED on the button turns off.
Note:
To enter Manual mode from preset colors mode and manually adjust a color, you need to fetch the last
output value of the respective color.
Turn the controls (D)–(I) clockwise or counterclockwise to fetch the value.
Static Colors Mode
In this mode you can select one of the 12 preset colors or 12 user-recorded colors.
Preset Colors Mode
In this mode you can select one of the 12 preset colors (warm white, daylight, yellow, gold, fire, pink,
purple, night blue, sky blue, cyan, grass, lime).
Press the FIXED COLORS button (13) to enter the Preset Colors mode. The LED on the button lights up.
Press one of the COLORS/CHASES buttons (1)–(12) to select a preset color. The LED on the button
lights up.
Turn the AMBER/STROBE control (H) to add strobe effect. The adjustment range is from low to high
frequency.
Press the FIXED COLORS button (13) to exit the Preset Colors mode. The LED on the button turns off.
The preset colors have the following DMX values:
Button
Preset color
Red
Green
Blue
White
Amber
UV
1
Warm White
245
225
105
60
235
0
2
Daylight
255
230
155
155
0
0
3
Yellow
255
230
0
0
135
0
4
Gold
255
115
0
0
255
0
5
Fire
200
50
0
0
50
0
6
Pink
255
0
127
0
0
255
7
Purple
220
0
255
0
0
255
8
Night Blue
25
0
255
0
0
255