Show Tec Pixel Bar COB 8*15W RGB User manual

Pixel Bar, COB 8*15W RGB
User Manual
Our COB light offers many possibilities to achieve very nice laser effects which you want. It is specially designed
for the stages, disco, night clubs and etc. Please read the manual before operation.
A. SPECIFICATION
1. Voltage: AC 100V/240V, 50Hz/60Hz
2. Power consumption: 120W
3. Current: 1.7A@110V, 0.8A@240V
4. LED: COB 8*15W RGB
5. Beam angle: 55 degree
6. Operation mode: LED display
7. Working environment: -10~40℃
8. DMX channels: 2,3, 5, 6, 12, 24CH
9. Working mode: DMX mode, master/slave mode, built-in programs mode, auto running mode, static color,
sound-active mode
10. Lumen: R 300lux@2m
G 340lux@2m
B 410lux@2m
RGB 1050lux@2m
11. Power linking: 4pcs@110V, 9pcs@240V
B. OPERATION
This series of product has rich effect programs, there are six working mode:
·built-in programs
·auto running
·sound-active
·DMX mode
·master/slave mode
·static color
1. Built-in Programs Mode
1) Press the “MODE”, enter into built-in programs mode menu “ ”;

Press the “UP”or “DOWN”, select the operation programs effect “~ ”.
2) Press the “SETUP”, enter into the programs operation speed menu “ ”;
Press the “UP”or “DOWN”, to set the speed value “~(SP100)”.
3) Press the “SETUP”, enter to set the programs operation strobe menu “ ”;
Press the “UP”or “DOWN”, set the strobe value “~ (FS100)”.
2. Auto Running Mode
1) Press the “MODE”, enter auto running mode menu “ ”.
2) Press the “SETUP”, enter into the speed menu of auto running programs“ ”;
Press the “UP”or “DOWN”, to set the speed value “~ (SP100)”.
3) Press the “SETUP”, enter into strobe menu of auto running programs “ ”;
Press the “UP”or “DOWN”, to set the strobe value “~ (FS100)”.
4) Press the “SETUP”, enter into the auto running programs operation time menu “”;
Press the “UP”or “DOWN”, set the auto running programs operation time value “~”.
3. Sound-active Mode
1) Press the “MODE”, enter into sound-active mode “ ”;
2) Press the “UP”or “DOWN”, to set the sound-active sensitivity value “ – ”.
4. DMX Mode
1) Press the “MODE”, enter auto running mode menu “ ”.
2) Press the “UP” or “DOWN”, set the DMX address value ~ .
3) Press the “SETUP”, enter to set the DMX working mode menu “ ”.
4) Press the “UP” or “DOWN” select the DMX working mode , , , , , .
DMX mode 1:
CH1
CH2
NO.
Value
FUNCTION
1
0
OFF
--
2
1—7
R
3
8—15
RG
4
16—23
G
5
24—31
GB
6
32—39
B
7
40—47
RB
8
48—55
RGB
9
56—63
PROGRAM01
SPEED
0—255
10
64—71
PROGRAM02
11
72—79
PROGRAM03
12
80—87
PROGRAM04
13
88—95
PROGRAM05
14
96—103
PROGRAM06
15
104—111
PROGRAM07
16
112—119
PROGRAM08

17
120—127
PROGRAM09
18
128--135
PROGRAM10
19
136—143
PROGRAM11
20
144—151
PROGRAM12
21
152—159
PROGRAM13
22
160—167
PROGRAM14
23
168—175
PROGRAM15
24
176—183
PROGRAM16
25
184—191
PROGRAM17
26
192—199
PROGRAM18
27
200--207
PROGRAM19
28
208—215
PROGRAM20
29
216—223
PROGRAM21
30
224—131
PROGRAM22
31
232—239
PROGRAM23
32
240—247
PROGRAM24
33
248—255
SOUND
Sensitivity
0—255
DMX mode 2:
CH1
CH2
CH3
Red
Green
Blue
DMX mode 3:
CH1
CH2
CH3
CH4
CH5
Red 0-255
Green 0-255
Blue 0-255
Dim 0-255
Flash 0-255
DMX mode 4:
CH1
CH2
CH3
CH4
CH5
CH6
Red 1
Green 1
Blue 1
Red 2
Green 2
Blue 2
DMX mode 5:
CH1
CH2
CH3
CH4
CH5
CH6
Red 1
Green 1
Blue 1
Red 2
Green 2
Blue 2
CH7
CH8
CH9
CH10
CH11
CH12
Red 3
Green 3
Blue 3
Red 4
Green 4
Blue 4
DMX mode 6:
CH1
CH2
CH3
CH4
CH5
CH6
Red 1
Green 1
Blue 1
Red 2
Green 2
Blue 2
CH7
CH8
CH9
CH10
CH11
CH12
Red 3
Green 3
Blue 3
Red 4
Green 4
Blue 4
CH13
CH14
CH15
CH16
CH17
CH18

Red 5
Green 5
Blue 5
Red 6
Green 6
Blue 6
CH19
CH20
CH21
CH22
CH23
CH24
Red 7
Green 7
Blue 7
Red 8
Green 8
Blue 8
5. Master/slave Mode
Press the “MODE”, enter into master/slave mode “SLAv”.
6. Static Color
1) Press the “MODE”, enter into static color mode “clor”.
2) Press the “SETUP”, enter into the red brightness setting menu “”;
Press the “UP”or “DOWN”, to set the red brightness “~”.
3) Press the “SETUP”, enter into the green brightness setting menu “”;
Press the “UP”or “DOWN”, to set the green brightness “~”.
4) Press the “SETUP”, enter into the blue brightness setting men “”;
Press the “UP”or “DOWN”, to set the blue brightness “~”.
NOTE: if no button operation in 20 seconds, the display panel will darkened (disable display）; in the state of
display panel darken, press any button, will show the current state, in the display state, can adjust the working
mode and operation state.