Show Tec POWER SPOT 9 G6 TOUR V1 User manual

Power Spot 9 Q6 Tour V1
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 42576
MANUAL
ENGLISH

1
Ordercode: 42576
Power Spot 9 Q6 Tour
Table of contents
Warning ...............................................................................................................................................................................2
Unpacking Instructions.................................................................................................................................................2
LED Expected Lifespan ................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................4
Rigging ............................................................................................................................................................................4
Connection with the mains.........................................................................................................................................5
Return Procedure..........................................................................................................................................................6
Claims..............................................................................................................................................................................6
Description of the device.................................................................................................................................................7
Frontside..........................................................................................................................................................................8
Backside .........................................................................................................................................................................9
Installation.........................................................................................................................................................................10
Set Up and Operation .....................................................................................................................................................10
Control Modes.............................................................................................................................................................10
One Power Spot (Manual Mode, Auto Mode and Built-in programs) ..........................................................10
One Power Spot (Sound-controlled) ...................................................................................................................10
Multiple Power Spots (Master/Slave control) .....................................................................................................10
Multiple Power Spots (DMX Control) ....................................................................................................................11
Fixture Linking...............................................................................................................................................................12
Data Cabling...............................................................................................................................................................12
Control Panel ...............................................................................................................................................................13
Control Mode ..............................................................................................................................................................13
DMX Addressing ..........................................................................................................................................................13
Menu Overview...........................................................................................................................................................14
Main Menu Options....................................................................................................................................................15
1. DMX Addressing...................................................................................................................................................15
2. Sound-controlled .................................................................................................................................................15
3. Manual Mode (Static Color Mode) .................................................................................................................15
4. Settings...................................................................................................................................................................16
4.1 LCD Backlight .....................................................................................................................................................16
4.2 Factory Reset......................................................................................................................................................16
5. Info..........................................................................................................................................................................16
6. Auto Mode............................................................................................................................................................16
8. Slave Mode...........................................................................................................................................................17
DMX Channels .............................................................................................................................................................18
6 channels .................................................................................................................................................................18
8 channels .................................................................................................................................................................18
10 channels...............................................................................................................................................................19
Maintenance....................................................................................................................................................................20
Troubleshooting ...............................................................................................................................................................20
No Light.........................................................................................................................................................................21
No Response to DMX..................................................................................................................................................21
Product Specifications....................................................................................................................................................22
Dimensions........................................................................................................................................................................24
Notes ..................................................................................................................................................................................25

2
Ordercode: 42576
Power Spot 9 Q6 Tour
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
Showtec Power Spot 9 Q6 Tour
PowerCon power cable
User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual

3
Ordercode: 42576
Power Spot 9 Q6 Tour
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
•Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
•Never remove warning or informative labels from the unit.
•Never use anything to cover the ground contact.
•Never lift the fixture holding it by the projector-head, as the mechanics may be damaged. Always
hold the fixture by the transport handles.
•Never place any material over the lens.
•Never look directly into the light source.
•Never leave any cables lying around.
•Do not insert objects into air vents.
•Do not connect this device to a dimmerpack.
•Do not switch the device on and off in short intervals, as this will reduce the device’s life.
•Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
•Do not shake the device. Avoid brute force when installing or operating the device.
•Only use the device indoors, avoid contact with water or other liquids.
•Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly
fastened.
•Only operate the device after having familiarized with its functions.
•Avoid flames and do not put close to flammable liquids or gases.
•Always keep the case closed while operating.
•Always allow a free air space of at least 50 cm around the unit for ventilation.
•Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
•Make sure that the device is not exposed to extreme heat, moisture or dust.
•Make sure that the available voltage is not higher than stated on the rear panel.
•Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
•If the lens is obviously damaged, it has to be replaced.
•If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
•If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
•If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
•For adult use only. The fixture must be installed beyond the reach of children. Never leave the unit
running unattended.
•Never attempt to bypass the thermostatic switch or fuses.
•For replacement use fuses of same type and rating only.
•The user is responsible for correct positioning and operating of the Power Spot. The manufacturer will
not accept liability for damages caused by the misuse or incorrect installation of this device.
•This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.

4
Ordercode: 42576
Power Spot 9 Q6 Tour
•During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
•Repairs, servicing and electric connection must be carried out by a qualified technician.
•WARRANTY: Till one year after date of purchase.
Operating Determinations
•This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
•The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
•The maximum ambient temperature ta= 40°C must never be exceeded.
•The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
•If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
•Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
•If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used.
•Use a clamp to mount the projector, with the mounting bracket, to the trussing system.
•The projector must never be fixed swinging freely in the room.
•The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
•When rigging, derigging or servicing the projector, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.

5
Ordercode: 42576
Power Spot 9 Q6 Tour
The Power Spot can be placed on a flat stage floor or mounted to any kind of truss with a clamp.
Improper installation can cause serious injuries and/or damage of property!
Connection with the mains
Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!

6
Ordercode: 42576
Power Spot 9 Q6 Tour
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to report and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be prepared in writing or sent by fax within 10 working days after receipt of
the invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement from which the obligation is resulting.

7
Ordercode: 42576
Power Spot 9 Q6 Tour
Description of the device
Features
The Power Spot 9 Q6 Tour is an ultra-compact light effect with high output and great effects.
It is the ideal solution for small clubs and mobile DJs.
Compact size
Sound Control
Input voltage: 100-240V, 60/50Hz
Power consumption: 64,1W
DMX channels: 6, 8 or 10
LCD display
Light source: 9 x 6-in-1 12W LED RGBWA-UV
Control modes: Built-in programs, Auto, DMX, Slave, Sound-controlled, Manual
Control protocol: DMX-512
Dimmer: 0-100%
Strobe: 0-20Hz
Flicker free (Suitable for TV Studio)
Refreshrate: 7,8 KHz
Beam Angle: 18°
Convection cooling, 100% silent / Forced Convection
Working temperature: -10°C ~ 40°C
Power linking: 19pcs@240V, 8pcs@110V
Double bracket
Housing: Die cast Aluminum, powder coat finish
Connections: Blue / White Power connector IN/OUT
3-pin + 5-pin XLR IN/OUT
Dimensions: 264 x 113 x 294 mm (LxWxH)
Weight: 2,84 kg
Lux @ 1 - 5m
1m
2m
3m
4m
5m
Red
2348
630
279
166
103
Green
4475
1108
490
273
178
Blue
773
203
90
52
32
White
4625
1235
580
308
202
Amber
1976
520
228
135
78
UV
30
10
7
3
1,5
FULL ON
12050
3230
1213
765
462

8
Ordercode: 42576
Power Spot 9 Q6 Tour
Frontside
Fig. 01
01) Adjustment screw
02) Double mounting bracket
03) 9 x 6-in-1 12W LED RGBWA-UV

9
Ordercode: 42576
Power Spot 9 Q6 Tour
Backside
Fig. 02
04) 4-digit LED display + control buttons
05) 5-pin DMX signal connector IN
06) 3-pin DMX signal connector IN
07) Blue power connector 100-240V IN
08) White power connector 100-240V OUT
09) 3-pin DMX signal connector OUT
10) 5-pin DMX signal connector OUT

10
Ordercode: 42576
Power Spot 9 Q6 Tour
Installation
Remove all packing materials from the Power Spot 9 Q6 Tour. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply. The device can be sound-controlled as it is equipped
with a built-in microphone.
Control Modes
There are 6 modes:
•Manual Mode (Static Color)
•Auto Mode
•Built-in programs
•Sound-controlled
•Master/Slave
•DMX-512 (6CH, 8CH, 10CH)
One Power Spot (Manual Mode, Auto Mode and Built-in programs)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) When the Power Spot is not connected with a DMX cable, it functions as a stand-alone device.
04) Please see page 15-17 for more information about the Built-in programs, Auto Mode and Manual
Mode.
One Power Spot (Sound-controlled)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) Turn on the music. If the device is set to sound-control, then the Power Spot will react to the beat of
the music.
04) Please see page 15 for more information about the sound-control options.
Multiple Power Spots (Master/Slave control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Use a 3-pin XLR cable to connect the Power Spot.
The pins:
01) Earth
02) Signal -
03) Signal +
03) Link the units as shown in fig. 03. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on pages 15-17 (Built-in
programs, Auto Mode, Manual Mode or Sound-controlled Mode). This means that you can set your
desired operation mode on the master device and all slave devices will react the same as the
master device.

11
Ordercode: 42576
Power Spot 9 Q6 Tour
Multiple Power Spots (Master/Slave control)
Fig. 03
Multiple Power Spots (DMX Control)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin XLR cable to connect the Power Spots and other devices.
04) Link the units as shown in fig. 04. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
05) Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first
unit. Do not supply power before the whole system is set up and connected properly.

12
Ordercode: 42576
Power Spot 9 Q6 Tour
Multiple Power Spots DMX Set Up
Fig. 04
Note : Link all cables before connecting electric power
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy-chained in a single line. To comply with the
EIA-485 standard, no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of fixtures on a DMX data link: 30 fixtures
Maximum recommended number of fixtures on a power link: 8 @ 110V
Maximum recommended number of fixtures on a power link: 19 @ 240V
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable,
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio Certified DMX Data Cables
•DAP Audio Basic microphone cable for allround use. bal. XLR/M 3 p. > XLR/F 3 p.
Ordercode FL01150 (1,5m.), FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115 (15m.), FL0120 (20m.).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m.).

13
Ordercode: 42576
Power Spot 9 Q6 Tour
The Power Spot 9 Q6 Tour can be operated with a DMX controller in control mode or without the DMX
controller in stand-alone mode.
Control Panel
A) LED display
B) MODE button
C) SETUP button
D) UP button
E) DOWN button
Fig. 05
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address, next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign DMX fixture addresses, which is the first
channel with which the Power Spot will respond to the controller.
Please note, when you use the controller, the unit has 10 channels.
When using multiple Power Spots, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Power Spot should be 1(001); the DMX address of the second
Power Spot should be 1+10=11 (011); the DMX address of the third Power Spot should be 11+10=21 (021),
etc. Please, be sure that you do not have any overlapping channels in order to control each Power Spot
correctly. If two or more Power Spots are addressed similarly, they will work similarly.
Controlling:
After having addressed all Power Spot fixtures, you may now start operating these via your lighting
controller.
Note: After switching on, the Power Spot will automatically detect whether DMX 512 data is received or
not.
If there is no data received at the DMX-input, the “LED “ on the control panel will not flash.
If not, the problem may be:
•The XLR cable from the controller is not connected with the input of the Power Spot 9 Q6 Tour.
•The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It is necessary to insert an XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
Display Off after 10 seconds
When no button is pressed for 10 seconds, the display will turn off.
To light up the display, you have to press the MODE, SETUP, UP or DOWN button.
Once you have pressed the button, the display will light up.

14
Ordercode: 42576
Power Spot 9 Q6 Tour
Menu Overview

15
Ordercode: 42576
Power Spot 9 Q6 Tour
Main Menu Options
DMX-512 Mode
Sound-controlled Mode
Manual Mode (Static Color Mode)
Settings
Info
Auto Mode
Built-in programs
Master/Slave Mode
The Power Spot 9 Q6 Tour will show its version number at start-up!
1. DMX Addressing
With this menu you can set the DMX address.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open this menu. You can choose 512 different DMX addresses.
03) Use the UP/DOWN buttons to select the required address from .
04) Once you have set the desired DMX address, you can also choose the desired DMX Mode.
05) Press the SETUP button to set 3 different DMX Modes. Use the UP/DOWN buttons to choose between
6, 8 or 10 Channels.
2. Sound-controlled
With this menu you can you can set the audio sensitivity.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open this menu and set the sensitivity of the Power Spot 9 Q6 Tour.
03) Use the UP/DOWN buttons to select the required sensitivity from .
04) Turn on the music and the Power Spot 9 Q6 Tour will react to the beat of the music
3. Manual Mode (Static Color Mode)
With this menu you can you can manually set a desired color.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open the menu.
03) Repeatedly press the SETUP button to toggle between the following color settings:
Set the value of the red LEDs (000-255)
Set the value of the green LEDs (000-255)
Set the value of the blue LEDs (000-255)
Set the value of the white LEDs (000-255)
Set the value of the amber LEDs (000-255)
Set the value of the UV LEDs (000-255)
04) Press the UP/DOWN buttons to adjust the intensity of each of the 6-color LEDs. The adjustment range
is between 0-255, from low to high intensity. You can combine Red, Green, Blue, White, Amber and
UV to create an infinite range of colors.

16
Ordercode: 42576
Power Spot 9 Q6 Tour
4. Settings
With this menu you can manually set a few settings.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open this menu.
The Power Spot 9 has 2 different setting modes.
4.1 LCD Backlight
01) Press the SETUP button to open menu .
02) You can use the UP/DOWN buttons to select the desired LCD backlight time.
The Power Spot 9 has 4 different LCD backlight time settings.
4.2 Factory Reset
01) Press the SETUP button to open menu .
02) Press the SETUP button to open menu .
03) Press the UP/DOWN buttons to confirm the reset.
Reset possibility 2:
To reset the device to its factory default settings, press and hold down the MODE and SETUP buttons for a
few seconds.
5. Info
With this menu you can view the version number of your Power Spot 9.
01) Press the MODE button until the display shows .
02) Press SETUP to enter the Software Version Menu .
03) Press SETUP to show the version number .
6. Auto Mode
With this menu you can set the Power Spot 9 to the auto run program.
01) Press the MODE button on the device, until the display shows .
02) The device will now run all the available built-in programs in a sequence. It is not possible to adjust
any settings in Auto Mode.

17
Ordercode: 42576
Power Spot 9 Q6 Tour
7. Built-in programs
With this menu you can you can set the built-in programs.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open this menu.
03) You can use the UP/DOWN buttons to scroll through the 12 built-in programs.
04) You can use the SETUP button to open menu .
05) Use the UP/DOWN buttons to choose a color setting.
06) You can use the SETUP button to change the flash frequency of every color from .
This does not apply for the color setting .
07) When you select , you can press the UP/DOWN buttons to switch between the
built-in programs.
08) You can choose 2 different sub menus.
Speed from 000-100.
Flash Frequency from 000-099.
09) Use the SETUP button to open one of these menus or to switch between both menus.
10) Use the UP/DOWN buttons to change the speed from .
11) Use the UP/DOWN buttons to change the flash frequency from .
8. Slave Mode
With this menu you can set the slave mode.
01) Press the MODE button and then the UP/DOWN buttons, until the display shows .
If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master movement. If the device has been set to slave, it will react the same as
its master device.

18
Ordercode: 42576
Power Spot 9 Q6 Tour
DMX Channels
6 channels
Channel 1 –Red
0-255
Gradual adjustment Red, from 0-100%
Channel 2 –Green
0-255
Gradual adjustment Green, from 0-100%
Channel 3 –Blue
0-255
Gradual adjustment Blue, from 0-100%
Channel 4 –White
0-255
Gradual adjustment White, from 0-100%
Channel 5 –Amber
0-255
Gradual adjustment Amber, from 0-100%
Channel 6 –UV
0-255
Gradual adjustment UV, from 0-100%
8 channels
Channel 1 –Dimmer intensity
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 2 –Red Dimmer must be open
0-255
Gradual adjustment Red, from 0-100%
Channel 3 –Green Dimmer must be open
0-255
Gradual adjustment Green, from 0-100%
Channel 4 –Blue Dimmer must be open
0-255
Gradual adjustment Blue, from 0-100%
Channel 5 –White Dimmer must be open
0-255
Gradual adjustment White, from 0-100%
Channel 6 –Amber Dimmer must be open
0-255
Gradual adjustment Amber, from 0-100%
Channel 7 –UV
0-255
UV flash frequency, from slow to fast
Channel 8 –Strobe Dimmer and CH2, CH3, CH4, CH5, CH6 or CH7 must be open
0-255
Strobe flash frequency, from slow to fast

19
Ordercode: 42576
Power Spot 9 Q6 Tour
10 channels
Channel 1 –Dimmer intensity
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 2 –Red Dimmer must be open
0-255
Gradual adjustment Red, from 0-100%
Channel 3 –Green Dimmer must be open
0-255
Gradual adjustment Green, from 0-100%
Channel 4 –Blue Dimmer must be open
0-255
Gradual adjustment Blue, from 0-100%
Channel 5 –White Dimmer must be open
0-255
Gradual adjustment White, from 0-100%
Channel 6 –Amber Dimmer must be open
0-255
Gradual adjustment Amber, from 0-100%
Channel 7 –UV Dimmer must be open
0-255
Gradual adjustment UV, from 0-100%
Channel 8 –Program Modes
0
No function
1-20
Static color mode / Program 1
21-41
Program 2
42-62
Program 3
63-83
Program 4
84-104
Program 5
105-125
Program 6
126-146
Program 7
147-167
Program 8
168-188
Program 9
189-209
Program 10
210-230
Program 11
231-251
Program 12
252-255
Sound-controlled mode
Channel 9 –Static Colors CH8 must be set between 1-20
0
Black
1-16
Red
17-33
Green
34-50
Blue
51-67
White
68-84
Amber
85-101
UV
102-118
Orange
119-135
Yellow
136-152
Violet
153-169
Pink
170-186
Cyan
187-203
Light Red
204-220
Light green