SIDIZ T50 AIR User manual

USER
GUIDE

T50
AIR

DIMENSION
18.9 - 21.7 (480 - 550)
22.6 - 25.4 (575 - 645)
19.9 (505)
23.9 - 27.2
(607 - 692)
28.9 (735)
18.1 - 21.5
(460 - 545)
38.6 - 41.9
(980 - 1065)
※Unit : inch (mm)
Tolerance : ± 0.8inch (20mm)

When elevating the seat height, lift the lever
and release it at the height desired while you
are standing up. When lowering the height of
the seat, sit on the center of the chair and lift
the lever. Release it at the desired height.
1SEAT HEIGHT

Push the lever down to the end for maximum
tilting. To limit the tilting range, lean to the
angle you want, and pull the lever upwards.
Then the chair will be locked to tilt only to
that angle.
* T50 AIR supports five tilting levels.
2MULTI-LIMITED TILTING
1
2
5
4
3
2
1

+
3TILTING TENSION
For stronger tilting tension, pull the right handle
out and rotate it clockwise. For weaker tension,
rotate the handle counter-clockwise.
When you are done with the adjustments,
insert the handle inwards.
+
-
-

HEIGHT Push the button on the lower side
of left/right arm pad and adjust the
height of armrest.
4ARMREST
ANGLE /
DEPTH
To rotate or slide arm pads, grasp
and move them to the direction you
desire.

DEPTH While you are standing up, pull out
the lever on the lower right sides of
the seat. Then drag the seat to the
direction you desire and release
the lever.
5SEAT
2
1

Please be aware that the product should be used as a chair only :
any other use can be dangerous for your safety.