SIDLER QUADRO 1.1006.999 User manual

OPERATING INSTRUCTIONS
Mode d’emploi
V 2.0 1/8
WALL MOUNT KIT INCLUDING SIDE MIRRORS
KIT FIXATION MURALE Y COMPRIS LES MIROIRS
LATÉRAUX
FOR MIRRORED BATHROOM CABINETS
MODEL:SIDLER® QUADRO
Read the instructions carefully before installing the mirror cabinet.
Lisez attentivement les instructions avant d’installer l’armoire de
toilette.
Keep these instructions for future reference.
Conservez-les instructions pour future référence.

OPERATING INSTRUCTIONS
Mode d’emploi
V 2.0 2/8
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of burns, fire, electric shock, or injury:
•This product is for household use only
•WARNING –do not use outdoors
•WARNING –use this furnishing only for its intended
use as described in these instructions
•WARNING –never operate the furnishing with the air
openings blocked. Keep the air openings free of lint,
hair, and the like
•WARNING –never drop or insert any object into any
opening
•WARNING –avoid dispensing of aerosol sprays near
top of the cabinet
*SAVE THESE INSTRUCTIONS
Importantes consignes de sécurités pour réduire les
risques de brulures, d’incendie, de choc électrique et de
blessures:
•Ce produit est destiné seulement à un usage
personnel et familial
•Avertissement –ne pas utilisez à l’extérieur
•Avertissement –Utilisez cette armoire pour l’usage
approprie tel que décrit dans ce manuel
•Avertissement –Ne jamais faire fonctionner l’armoire
si ses ouvertures d’aération sont obstruées. Veiller à
ce que ses ouvertures soient exemptes de peluches,
cheveux et autres.
•Avertissement –Ne jamais laissez tomber ou insérer
un objet dans les ouvertures
•Avertissement –Éviter la pulvérisation de bombes
aérosol à proximité haut de l’armoire
*VEUILLEZ CONSERVER CES INSTRUCTIONS

OPERATING INSTRUCTIONS
Mode d’emploi
V 2.0 3/8
LIST OF ALL COMPONENTS TO BE INSTALLED
LISTE DES PIÈCES À INSTALLER
The components pos.2 and pos.6 are included in the delivered mirror cabinet.
Pos.
Description
Dimension
Comment
1
side mirror / miroir latéraux
wall mount only
2
mounting bracket / support de montage
wall mount only
3
sheet metal / tôle
wall mount only
4
bottom screen / brise-vue
wall mount only
5
screw / vis
M4x8
wall mount only
6
screw / vis
4.5 x 35 mm
7
anchor / gouions
wall mount only
8
raw plug / gouions
wall mount only
pos. 1 side mirror / miroir latéraux
pos. 2 assembly rail/support de montage
pos. 3 sheet metal / tôle
pos. 4 bottom screen / brise-vue
pos. 5 screw / vis
pos. 6 screw / vis
pos. 7 anchor / goujons
pos. 8 raw plug / goujons

OPERATING INSTRUCTIONS
Mode d’emploi
V 2.0 4/8
INSTALLATION GUIDE –GUIDE D’INSTALLATION
Step 1 –Mounting bracket
Étape 1 - Support de montage
a) Mount the mounting bracket (pos. 2) according to the schematic drawings
below. Recommend height: center of mounting holes at 77’’.
Make sure that the mounting bracket is fastened to at least one wall stud. Use
the correct anchors for the different types of walls.
pos.7
dry walls, hollow brick walls
pos.8
brick walls, concrete walls
Drill holes 3/8’’ (10mm) for the anchors pos.4 or 1/4" (6mm) for pos.5
Check the mounting rail with a level before proceeding with the next steps.
pos.7
or
pos.8
pos.2
pos.6
pos.2

OPERATING INSTRUCTIONS
Mode d’emploi
V 2.0 5/8
Step 2 –Preparing wiring / assembling side mirrors
Étape 2 - Préparation du câblage / assemblage des rétroviseurs
latéraux
a) Bend the two flaps open at the back of the mirrored cabinet
b) Mount the side kits
pos.5

OPERATING INSTRUCTIONS
Mode d’emploi
V 2.0 6/8
Step 3 –Mount bottom cover
Étape 3 - Montez le couvercle inférieur
Step 4 –Thread wires through back opening
Étape 4 - Enfilez les fils dans l'ouverture arrière
pos.4

OPERATING INSTRUCTIONS
Mode d’emploi
V 2.0 7/8
Step 5 –Mount the Cabinet
Étape 5 - Montez l'armoire
a) Hang the cabinet into mounting bracket Pos. 2
b) Center the mirror cabinet over the vanity and fasten it at the lower
mounting holes as shown below, by using the anchors (pos.4 or pos.5).
proceed with
OPERATION INSTRUCTIONS Quadro
Step 6 (Connect the Electric Cables)
pos.2
Bottom fasteing positions

OPERATING INSTRUCTIONS
Mode d’emploi
V 2.0 8/8
LIMITED WARRANTY
SIDLER will provide a two-year warranty in respect of defects
associated with the Product, commencing from the date of
delivery, subject to the following conditions:
I. The Product must have been professionally mounted and
installed by a certified licensed contractor in accordance
with the Safety Standards Act, S.B.C. 2003, c. 39, as
amended, and the Electrical Safety Regulation B.C. Reg.
100/2004, as amended.
II. The Product must have been used by the Purchaser in the
manner and for the purpose recommended and authorized
by SIDLER and the manufacturer.
III. The Product must not have been modified, or changed in
design or function following delivery.
IV. In each case, written notice by the Purchaser specifying the
alleged defects must be received during the warranty period
(within two years of the date of delivery).
V. The warranty is limited to replacement parts only.
VI. Damages resulting from normal wear and tear are excluded.
The determination of whether damage has so resulted will
be in the sole discretion of SIDLER.
VII. Damages resulting from any errors in representations made
by the manufacturer regarding product specifications are
excluded.
SIDLER® International Ltd.
Burnaby, BC
CANADA
Phone: [phone]
Toll Free: [phone]
Fax: [phone]
e-mail: [email protected]
Website: www.sidler-international.com