Siemens WT44C101GC User manual

1 2 3 4 5 6
Programme selector
End of programme as soon as bü(finished/anti-crease) indicator light flashes
Adding or removing laundry
The drying cycle can be interrupted in order to add or remove l aundry.
The programme must then be c ontinued or ended.
The drum and the door may be hot!
1. Open the door. The drying proc ess is interrupted.
2. Load or remove laundr y and close the door.
3. If required, select a new prog ramme and additional functions.
4. Press the Start button.
Emptying condensation
Empty the container after every use.
1. Remove the condensation container and hold it
level.
2. Open the locking cap.
3. Pour out the condensation.
Check the valve in the condensation container for dirt:
If there are fluff de posits on the valvearinse the valve under
running water. Also pour some tap water into the empty condensation
container then pour it out again through the valve.
To do this, press the valve in and allow all the water to d rain out.
4. Regularly remove any deposits in the l ocking cap hole using
a pointed object.
5. Close the locking cap.
6. Always push the tank fully back in unti l it locks in place.
If the Empty È/ Clean ¡°lindicator
light comes on a fter emptying the conta iner asee page 10.
Cleaning the fluff filter
Clean the fluff filter after every use .
1. Open the door and pull out th e fluff filter.
2. Remove the fluff (brush your hand o ver the fluff filter).
If the fluff filter is very dirty or blocked, wash it out with warm water
and dry thoroughly.
3. Replace the fluff filter.
4. Remove fluff from door/door area.
Switching off the dryer
Set the programme selector to Of f.
Do not leave laundry in the dryer.
Removing the laundry
Your dryer has an automatic anti-crease function. The drum is move d at set intervals for 30 minutes after
the programme has ended. Laundry remains loose an d fluffy (for 90 minutes, if additional Î(easy-iron)
function is selected - depend ing on model).
... and adapt to individual requirements
Never operate the dryer if it is dama ged.
Inform your after-sales service . Inspecting
the dryer
Sorting and loading laundry
Remove all objects from pockets.
Pay particular attention to cigarette lighters.
The drum must be em pty before filling.
Your new dryer
Congratulations - You have c hosen to buy a moder n, high-quality
Siemens domestic appliance.
A distinctive feature of your dryer is its low e nergy consumption.
Every dryer which leaves our factory is carefully checked to ensure
that it functions correctly and is in perfect condition .
Should you have any questions, our after-sales service will be ple ased
to help.
Disposal in an environmentally-respons ible manner
Dispose of packaging in an environmentally-responsible manner.
This appliance is designa ted according to European d irective 2002/96/EC which governs was te electrical and electronic
equipment (WEEE).
The directive provides an EU-wide framework for the return and
recycling of old appliances.
For further information about our p roducts, accessories, spare parts
and services, please visit: www.siemens-home.com
Intended use
Contents Pa ge
ʋPreparation . . . . . . . . . . . . . . . . . . . . . . 2
ʋSetting the programmes . . . . . . . . . . . . . 2
ʋDrying . . . . . . . . . . . . . . . . . . . . . . . . 3/4
ʋNotes on laundry . . . . . . . . . . . . . . . . . . 5
ʋCare and cleaning . . . . . . . . . . . . . . . . . . 6
ʋOverview of programmes . . . . . . . . . . . . 7
ʋInstallation . . . . . . . . . . . . . . . . . . . . . . . 8
ʋFrost protection / Transport . . . . . . . . . . . 8
ʋTechnical data . . . . . . . . . . . . . . . . . . . . 9
ʋOptional accessories . . . . . . . . . . . . . . . . 9
ʋWhat to do if... / After-sales servic e . . . . 10
ʋSafety instructions . . . . . . . . . . . . . . . . 11
Preparing for installation, see page 8
Selecting and adjusting the programme
Drying
Condensation container
Control panel
Care and cleaning
Dryer cabinet, control panel, air cooler, moisture sensors
– Wipe off with a soft, damp cloth.
– Do not use abrasi ve cleaners or solvents.
– Remove detergent a nd cleaning agent re sidue immediately.
Clean the air coo ler 5 to 6 times a ye ar
or if Empty È/ Clean ¡°lflashes after clea ning the fluff filter.
Air cooler
In order to clean it, the air cooler m ust be removed.
– Allow t he dryer to cool.
– Re sidual water may le ak out, so place an absorbent towel unde rneath
the maintenance door.
1. Unlock the maintenance door ( 1).
2. Fully open the maintenance d oor (2).
3. Turn both locking levers o utwards (1).
4. Pull out the front insert (2).
5. Remove the air cooler.
Take care not to d amage the air cooler.
When cleaning, use warm water only. Do not u se hard or sharp -edged objects.
6. Clean the air cooler thoroughly and allow the water to drain off.
Clean the seals.
7. First insert the air cooler (handle at th e bottom) and then the front inse rt.
8. Turn back both locking levers .
9. Lock the maintenance door.
Moisture sensors
The dryer is fitted with stainless steel moisture sensors. The sensors measure the level of
moisture in the laundry. After a long period of operation, a fine layer of limescale may form
on the sensors.
1. Open the door.
2. Clean the moisture sensors using a slightly damp sponge with a rough
surface.
Do not use steel wool or abrasive m aterials.
Select the drying programme ...
Press the Start button
1
2
3
Only if your hands are dry.
Only hold the plug by the plug
casing.
Connecting the
mains plug
Drying
Information on laundry ...
Labelling of fabrics
Follow the manufacturer's care infor mation.
(Drying at normal temp erature.
'cLow-temperature drying ain addition, se lect (low heat).
)cDo not machine dry.
Be sure to follow the safety instruc tions asee page 11!
For example, do not use the dryer for th e following fabrics:
– Airtight fabrics (e.g. rubber-coated fabrics) .
– Delicate materials (silk, curtains made from synthetic material) athey may crease.
– Laundry contami nated with oil.
Before drying for the first time
– Do not put any laundry in the dryer. Set th e programme selector to a timed programme
(asee page 7) and select Start. When the program me has finished, set the
programme selector to Off.
Drying tips
– To ensure a consiste nt result, sort the laundry by fabric type a nd drying programme.
– Always dry very small fabrics (e.g. baby socks) together with large items of laundry
(e.g. hand towels).
– Fasten zips, hooks and eyelets, button covers and tie together cloth belts, strips, etc.
– Do not overdry easy-care laundry arisk of creasing.
Allow laundry to finish drying in th e air.
– Do not iron laundry immediately after drying, fold items up and leave for a while athe
remaining moisture will t hen be distributed evenly.
– Knitted fabrics (e.g. T shirts, knitwear) often s hrink when tumble dried for the first time
ado not use the Cupboard Dry Plus ++ programme.
– Starched laun dry is not always s uitable for dryers astarch leaves behind a coating that
adversely affects the drying operation.
– Use the correct dosage of fabric softener as per the m anufacturer's instructions when
washing the laundry to b e dried subsequently.
– Using a timed programm e with a small laundry load aoptimisation of the drying result.
Environmental protection / Energy-saving tips
– Before drying, spin the la undry thoroughly in the washing machine athe hig her the spin
speed, the shorter the drying ti me will be (consumes less energy), al so spin easy-care
laundry.
– Use the maximum recommended fill level but do not overload laundry
aoverview of programmes, see page 7.
– Make sure the room is well ventilated during drying.
– Clean the fluff filter a fter every drying cycle asee page 4.
– Do not block or seal the air inlet.
Only when the applianc e is
switched off.
Drum
Only operate the dryer
with the fluff f ilter inserted.
Air inlet
Fluff filter
ʋexclusively for domestic u se,
ʋonly for drying fabrics which have been washed u sing
water.
Do not leave children unsup ervised near the dryer.
Keep pets away from the dryer.
The dryer may be oper ated by children from
8 years of age, by persons who have limited
physical, sensory or mental abilities and by
persons who have inad equate experience or
knowledge, provided they a re supervised or
have been instructed by a respon sible person.
For a detailed programme overview, asee page 7.
Before using the dryer for the first time
run the drying cycle without any laundry asee page 7 .
Additional functions/status
and service indicators
ˣÎ(easy-iron) Reduces creasing and p rolongs the anti-creasing phase
after the programme has finished.
ˎ÷
(low heat)
Reduced temperature for d elicate fabrics ', e.g. polya crylic,
polyamide, elastane or acetate; for l onger drying times.
bfinished/anti-crease
Empty È
Clean ¡°lLit aempty the cont ainer for condensation.
Flashes aclean the fluff filter and/o r air cooler.

7
Programme overview see also page 5.
Sort the laundry according to type of textile and fabric. Fabrics must be suitable for tumble drying. After drying, laundry is to be ...
c
ironed

lightly ironed
@c
not ironed
c
mangled
PROGRAMMES TEXTILE TYPE AND INF ORMATION **ÊCottons max. 7 kg Hard-wearing fabrics, boil-pro of fabrics made of cotton o r linen.
**ÏEasy-Care max. 3.5 kg Non-iron laundry made of syn thetic fibres and mixed fabric, easy-care cotton .
ÔIron Dry c÷@c The condition of the laundry means it is sui table for ironing (iron clothes in order to av oid creases).
+Cupboard Dry @For single-layered laundry. *++ Cupboard Dry Plus @For laundry with thick, multi-layered parts.
Timed Program
warm 60’
max. 3 kg Pre-dried, multi-layered, sensitive fabrics made of acrylic fibres, or s eparate small items of laundry. Also for subsequent drying.warm 40’
warm 20’ cold 20’ max. 3 kg All types of fabrics. For freshening up or airing of items of laundry tha th ave been worn for a short period of time.
*only for the ÊCottons programme
**Dryness levels can be s elected individually a++Cupboard Dry Plus, +Cupboard Dry and ÔüIron Dry (depending on the model).
Degree of dryness can be finely adjusted; m ulti-layered textiles require a longer drying time than single-layered ite ms of clothing. Recommendation: Dry separatel y
9205 / 9000787977 *787977* Siemens Electrogeräte GmbH
Carl-Wery-Str. 34
81739 München/Germany
WT44C101GC
8
Installation
– Delivery includes: dry er, installation and instruction manual .
– Check dryer for transpo rt damage.
– The dryer is very heav y. Do not lift without assistance.
– Be careful to avoid sharp edges.
– Do not lift the d ryer by protruding parts (e .g. the door) - risk of breakage.
– Do not install i n a room which is susc eptible to frost. Water m ay cause damage once i t
starts to freeze.
– If in doubt, have t he appliance connected b y a specialist.
Setting up the dryer
– The appliance plug must always be accessible.
– Ensure that the appliance is installed on a clean,
level and firm surface.
– Do not obstruct the air inlet on the front of the
dryer.
– Keep the area ar ound the dryer clean.
– Level the drye r using the front threaded feet.
On no account remove the th readed feet.
Mains conn ection For safety instr uctions, a see page 11.
– Connect to an AC earthed socket. If in doubt ha ve the socket checked by a specialist.
– The mains voltage must b e the same as the voltage specified o n the rating plate
(
a see page 9).
– The connected load and necessary fuse protection are specified o n the rating plate.
Frost protection / Transport
Preparation
Empty the container for c ondensation
a see page 4.
There may be residual water in th e dryer.
This can leak out if the dryer is at an angle.
1.
Remove all accessories from
the drum. The drum m ust be
empty.
Make sure that the air
inlet remains unobstructed
Clean and level
2.
Do not operate the dryer if there
is a danger of frost.
Do not install the dryer behind a door or a sliding
door which could obstruct the door of the dryer o r
prevent it from bein g opened. Children can t hen
not be trapped inside and their life endangered.
9
Technical data
ʠDimensions (DxWxH) 60 x 60 x 85 cm
Weight approximately 35 kg
Max. capacity 7 kg
Condensation container approx. 4. 2 l
Ambient temperature 5 - 35 °C
Connection voltage 220 - 240 V
Connected load 2025/2600 W
Fuse protection 13 A
Product number
a Rating plate or inside of the door
Production number
You can find the rating plate on the back of the dryer.
ʠConsumption ra tes Specifications are average values established under normal
operating conditions. Fluctuat ions of up to 10 % are p ossible.
Spin speed in rpm
(residual moisture)
Drying time** in
min incl. 8 min
cooling time
Energy
consumption**
in kWh
ÊCottons 7 kg 13 A 13 A
+cCupboard Dry* 1400 (approx. 50 %) 90 3.32
1000 (approx. 60 %) 106 3.92
800 (approx. 70 %) 120 4.48
ÔüIron Dry* 1400 (approx. 50 %) 66 2.45
1000 (approx. 60 %) 82 2.94
800 (approx. 70 %) 96 3.43
ÏüEasy-Care 3.5 kg
+cCupboard Dry* 800 (approx. 40 %) 4 0 1.16
600 (approx. 50 %) 45 1.45
*Test programmes according to DIN EN 61121.
**The values may diverge from th ose specified depending on over and
undervoltage, fabric type, c omposition of the laundry to b e dried, residual mois ture
in the fabric and the amount of the load.
Optional accessories (or der from the after-sales service using the o rder number)
Washer-dryer stack connec tion set
The dryer can be placed o n top of a suitable washin g machine with the same width a nd depth
to save space. The dryer must be fasten ed on the washing ma chine with this connection s et.
If the worktop of the washing ma chine is less than 544 mm deep , please consult the
after-sales service or your spec ialist retailer.
WZ
20311
10
What to do if ...
If you cannot rec tify a fault yourse lf (e.g. switching o ff/on), please contac t our after-sales
service. We will always find a n appropriate s olution and will a void unnecessary vis its by
engineers. Trust the expertise of the manufacturer an d rest assured that th e repair will be
carried out by t rained service tec hnicians using original spare pa rts. The contact d etails of your
local after-sales se rvice can be found in the enc losed after-sales service d irectory, or by
calling one of these numbers:
–GB 0844 8928999 (Calls from a BT ladline wi ll be charged at up to 3 pence per min ute.
A call set-up fee of up to 6 penc e may apply.)
–IE 01450 2655
When contacting the after-sales service, plea se quote the appliance's product number (E no.)
and production nu mber (FD) (see the inside of the door) .
Set the programme sel ector to Off and remove the appliance p lug from the socket.
ʠStart indicator lamp does not
light up.
Mains plug plugged in?
Programme selected?
Check the sock et fuse.
ʠEmpty È/ Clean ¡°lindicator
lights up.
Empty container for condensati on a see page 4.
ʠEmpty È/ Clean ¡°lindicator
light flashes.
Clean the fluff filter un der running water a see page 4.
Clean the air c ooler, if required
a see page 6.
ʠDryer does not start. Has the Start button been pressed?
Door closed?
Programme set?
ʠProgramme terminated sho rtly
after the start.
Ambient temperature greater than 5 °C?
ʠWater is leaking out. Make sure the dryer is level.
ʠThe door opens by i tself. Push the door close d until you hear it enga ge.
ʠThe required degree of dryness
was not achieved or the drying
time was too long.
Clean the fluff filter un der running water
a see page 4.
Empty the container for con densation.
Ambient temperature high er than 35 °C
a ventilate the
room.
Air inlet may be blocked
a clear obstruction.
Unsuitable programme selected ?
a see page 7.
Dryer installed too closely to other ob jects? Provide
adequate air circulation.
Mains failure
a Restart the dryer.
Fine layer of limescal e on the moisture sensors. Clean the
sensors
a see page 6.
ʠLaundry damp. Use th e next drying programme up or use the timed
programme as a suppl ement
a see page 7.
Warm laundry feels dam per than it really is!
ʠThe humidity in the room has
increased significantly.
Make sure the room is sufficien tly ventilated.
Air inlet blocked?
a Clear obstruction.
Make sure that the air cooler is inserted.
ʠOne or more indicator lights a re
flashing.
Clean the fluff filter and air cooler a see page 4/6.
Check the installation conditions a see page 8.
Switch off, allow to cool, s witch back on and restart the
programme.
ʠPower failure. Remove the laundry from th e dryer immediately and
spread it out. Heat may escape.
11
Safety instructions
Emergency – Pull the appliance plug out of the socket immedia tely or disconnect the fuse.
ONLY use the
dryer...
– in rooms inside the hou se.
– use for drying fabrics.
The dryer must
NEVER...
– be used for other purposes than tho se described above.
– be modified in terms of its techno logy or attributes.
Dangers – The dryer must not be used by children or persons w ho have not been
instructed in its use.
– Do not l eave children unsuper vised near the drye r.
– Keep pets away f rom the dryer.
– Remove all objects from the pockets o f garments.
Pay particular attention to cigarette lighter s
a risk of explosion.
– Do no t lean or sit on the door a risk of tipping.
– Open the door w ith care. Hot steam may escap e.
Installation – Fasten down loose l eads a risk of tripping.
– Do not operate the dr yer where there is a risk of frost.
Mains
connection
– Connect the dryer according to specifications to an AC e arthed socket, as
otherwise it cannot be guaranteed that the appliance is completely safe.
– The cable cross-secti on must be sufficient.
– Only use earth-leakage circuit breakers with the following symbol:
– The appliance plug a nd socket must be compatible.
– Do not u se multiple plugs/cou plings and/or extension cables.
– Do no t touch or hold the appliance plug with wet hands
a risk of electric
shock.
– Never pull the appli ance plug out of the socket by its cable .
– Do no t damage the mains lead
a risk of electric shock.
Operation – Only load the drum with items of la undry.
Check what has bee n loaded before switching th e dryer on.
– Do no t use the dryer if the laundry ha s been in contact with solvents, o il, wax,
grease or paint (e.g. hair setting spr ay, nail polish remover, stain remover,
cleaning solvent, etc.)
a fire/explosion hazard.
– Hazard due to dust (e.g. coa l dust, flour):
do not use the dryer
a risk of explosion.
– Do n ot put laundry containing foamed m aterial/rubber in the dryer a elastic
material may be destroyed and th e dryer may be damaged due to pos sible
deformation of the foamed material.
– Switch off the dryer once the programme has ended.
– The wa ter from condensation is n ot drinking water and ma y be contaminated
with fluff.
Defect – Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carrie d out by the after-sales service.
– Do not u se the dryer with a faulty mains cable. In o rder to avoid risk, have the
mains lead replaced on ly by our after-sales service.
Spare parts – Only use genuine spare parts and accessories for safety reasons.
Disposal – Dryer: pull out the mains pl ug, then cut the mains cable from the appliance.
Dispose of the appliance at a p ublic disposal facility.
– Packaging: Do not allow children acc ess to items of packaging
a risk of suffocation.
– All materials are e nvironmentally friendly and reu sable. Dispose of in an
environmentally responsible m anner.
Operating
and installation instructions
en
Observe the safety
instructions on
page 11.
Read these instructions before switching
on the dryer.
Tumble dryer

1 2
Programme selector büaÈ¡°laÎ... and adapt to individual requirements
Never operate the dryer if it is damaged.
Inform your after-sales service.
Sorting and loading laundry
Remove all objects from pockets.
Pay particular attention to cigarette lighters.
The drum must be empty before filling.
Your new dryer
Congratulations - You have chosen to buy a modern, high-quality
Siemens domestic appliance.
A distinctive feature of your dryer is its low energy consumption.
Every dryer which leaves our factory is carefully checked to ensure
that it functions correctly and is in perfect condition.
Should you have any questions, our after-sales service will be pleased
to help.
Disposal in an environmentally-responsible manner
Dispose of packaging in an environmentally-responsible manner.
This appliance is designated according to European directive 2002/96/EC which governs waste electrical and electronic
equipment (WEEE).
The directive provides an EU-wide framework for the return and
recycling of old appliances.
For further information about our products, accessories, spare parts
and services, please visit: www.siemens-home.com
Intended use
Contents Page
ʋPreparation . . . . . . . . . . . . . . . . . . . . . . 2
ʋSetting the programmes . . . . . . . . . . . . . 2
ʋDrying . . . . . . . . . . . . . . . . . . . . . . . . 3/4
ʋNotes on laundry . . . . . . . . . . . . . . . . . . 5
ʋCare and cleaning . . . . . . . . . . . . . . . . . . 6
ʋOverview of programmes . . . . . . . . . . . . 7
ʋInstallation . . . . . . . . . . . . . . . . . . . . . . . 8
ʋFrost protection / Transport. . . . . . . . . . . 8
ʋTechnical data . . . . . . . . . . . . . . . . . . . . 9
ʋOptional accessories . . . . . . . . . . . . . . . . 9
ʋWhat to do if... / After-sales service . . . . 10
ʋSafety instructions . . . . . . . . . . . . . . . . 11
Preparing for installation, see page 8
Selecting and adjusting the programme
È¡°l
Select the drying programme ...
Press the Only if your hands are dry.
Only hold the plug by the plug
casing.
Connecting the
mains plug ('ca)caaaaaa+aaaaa
Only operate the dryer
with the fluff filter inserted.
ʋexclusively for domestic use,
ʋonly for drying fabrics which have been washed using
water.
Do not leave children unsupervised near the dryer.
Keep pets away from the dryer.
The dryer may be operated by children from
8 years of age, by persons who have limited
physical, sensory or mental abilities and by
persons who have inadequate experience or
knowledge, provided they are supervised or
have been instructed by a responsible person.
For a detailed programme overview, aBefore using the dryer for the first time
run the drying cycle without any laundry a
Additional functions/status
and service indicators
ˣÎ(easy-iron) Reduces creasing and prolongs the anti-creasing phase
after the programme has finished.
ˎ÷
(low heat)
Reduced temperature for delicate fabrics ', e.g. polyacrylic,
polyamide, elastane or acetate; for longer drying times.
bfinished/anti-crease
Empty È
Clean ¡°lLit aempty the container for condensation.
Flashes aclean the fluff filter and/or air cooler.

3 4
End of programme as soon as bü(finished/anti-crease) indicator light flashes
Adding or removing laundry
The drying cycle can be interrupted in order to add or remove laundry.
The programme must then be continued or ended.
The drum and the door may be hot!
1. Open the door. The drying process is interrupted.
2. Load or remove laundry and close the door.
3. If required, select a new programme and additional functions.
4. Press the Start button.
Emptying condensation
Empty the container after every use.
1. Remove the condensation container and hold it
level.
2. Open the locking cap.
3. Pour out the condensation.
Check the valve in the condensation container for dirt:
If there are fluff deposits on the valvearinse the valve under
running water. Also pour some tap water into the empty condensation
container then pour it out again through the valve.
To do this, press the valve in and allow all the water to drain out.
4. Regularly remove any deposits in the locking cap hole using
a pointed object.
5. Close the locking cap.
6. Always push the tank fully back in until it locks in place.
If the Empty È/ Clean ¡°lindicator
light comes on after emptying the container asee page 10.
Cleaning the fluff filter
Clean the fluff filter after every use.
1. Open the door and pull out the fluff filter.
2. Remove the fluff (brush your hand over the fluff filter).
If the fluff filter is very dirty or blocked, wash it out with warm water
and dry thoroughly.
3. Replace the fluff filter.
4. Remove fluff from door/door area.
Switching off the dryer
Set the programme selector to Off.
Do not leave laundry in the dryer.
Removing the laundry
Your dryer has an automatic anti-crease function. The drum is moved at set intervals for 30 minutes after
the programme has ended. Laundry remains loose and fluffy (for 90 minutes, if additional Î(easy-iron)
function is selected - depending on model).
... and adapt to individual requirements
Inspecting
the dryer
Sorting and loading laundry
ʋʋʋʋʋʋʋʋʋʋʋʋSelecting and adjusting the programme
Drying
Condensation container
Control panel È¡°l
Select the drying programme ...
Press the Start button
1
2
3
Connecting the
mains plug
Drying ('ca)caaaaaa+aaaaa
Drum
Only operate the dryer
with the fluff filter inserted.
Air inlet
Fluff filter
ʋʋ
For a detailed programme overview, asee page 7.
Before using the dryer for the first time
run the drying cycle without any laundry asee page 7.
ˣÎˎ÷'bÈ¡°laa

56
büaÈ¡°laÎ
ʋʋʋʋʋʋʋʋʋʋʋʋCare and cleaning
Dryer cabinet, control panel, air cooler, moisture sensors
– Wipe off with a soft, damp cloth.
– Do not use abrasive cleaners or solvents.
– Remove detergent and cleaning agent residue immediately.
Clean the air cooler 5 to 6 times a year
or if Empty È/ Clean ¡°lflashes after cleaning the fluff filter.
Air cooler
In order to clean it, the air cooler must be removed.
– Allow the dryer to cool.
– Residual water may leak out, so place an absorbent towel underneath
the maintenance door.
1. Unlock the maintenance door (1).
2. Fully open the maintenance door (2).
3. Turn both locking levers outwards (1).
4. Pull out the front insert (2).
5. Remove the air cooler.
Take care not to damage the air cooler.
When cleaning, use warm water only. Do not use hard or sharp-edged objects.
6. Clean the air cooler thoroughly and allow the water to drain off.
Clean the seals.
7. First insert the air cooler (handle at the bottom) and then the front insert.
8. Turn back both locking levers.
9. Lock the maintenance door.
Moisture sensors
The dryer is fitted with stainless steel moisture sensors. The sensors measure the level of
moisture in the laundry. After a long period of operation, a fine layer of limescale may form
on the sensors.
1. Open the door.
2. Clean the moisture sensors using a slightly damp sponge with a rough
surface.
Do not use steel wool or abrasive materials.

1
2
3
Information on laundry ...
Labelling of fabrics
Follow the manufacturer's care information.
(Drying at normal temperature.
'cLow-temperature drying ain addition, select (low heat).
)cDo not machine dry.
Be sure to follow the safety instructions asee page 11!
For example, do not use the dryer for the following fabrics:
– Airtight fabrics (e.g. rubber-coated fabrics).
– Delicate materials (silk, curtains made from synthetic material) athey may crease.
– Laundry contaminated with oil.
Before drying for the first time
– Do not put any laundry in the dryer. Set the programme selector to a timed programme
(asee page 7) and select Start. When the programme has finished, set the
programme selector to Off.
Drying tips
– To ensure a consistent result, sort the laundry by fabric type and drying programme.
– Always dry very small fabrics (e.g. baby socks) together with large items of laundry
(e.g. hand towels).
– Fasten zips, hooks and eyelets, button covers and tie together cloth belts, strips, etc.
– Do not overdry easy-care laundry arisk of creasing.
Allow laundry to finish drying in the air.
– Do not iron laundry immediately after drying, fold items up and leave for a while athe
remaining moisture will then be distributed evenly.
– Knitted fabrics (e.g. T shirts, knitwear) often shrink when tumble dried for the first time
ado not use the Cupboard Dry Plus ++ programme.
– Starched laundry is not always suitable for dryers astarch leaves behind a coating that
adversely affects the drying operation.
– Use the correct dosage of fabric softener as per the manufacturer's instructions when
washing the laundry to be dried subsequently.
– Using a timed programme with a small laundry load aoptimisation of the drying result.
Environmental protection / Energy-saving tips
– Before drying, spin the laundry thoroughly in the washing machine athe higher the spin
speed, the shorter the drying time will be (consumes less energy), also spin easy-care
laundry.
– Use the maximum recommended fill level but do not overload laundry
aoverview of programmes, see page 7.
– Make sure the room is well ventilated during drying.
– Clean the fluff filter after every drying cycle asee page 4.
– Do not block or seal the air inlet.
Only when the appliance is
switched off.
ʋʋaaˣÎˎ÷'bÈ¡°laa

7
Programme overview see also page 5.
Sort the laundry according to type of textile and fabric. Fabrics must be suitable for tumble drying. After drying, laundry is to be ...
c
ironed

lightly ironed
@c
not ironed
c
mangled
PROGRAMMES TEXTILE TYPE AND INFORMATION **ÊCottons max. 7 kg Hard-wearing fabrics, boil-proof fabrics made of cotton or linen.
**ÏEasy-Care max. 3.5 kg Non-iron laundry made of synthetic fibres and mixed fabric, easy-care cotton.
ÔIron Dry c÷@c The condition of the laundry means it is suitable for ironing (iron clothes in order to avoid creases).
+Cupboard Dry @For single-layered laundry. *++ Cupboard Dry Plus @For laundry with thick, multi-layered parts.
Timed Program
warm 60’
max. 3 kg Pre-dried, multi-layered, sensitive fabrics made of acrylic fibres, or separate small items of laundry. Also for subsequent drying.warm 40’
warm 20’ cold 20’ max. 3 kg All types of fabrics. For freshening up or airing of items of laundry that have been worn for a short period of time.
*only for the ÊCottons programme
**Dryness levels can be selected individually a++Cupboard Dry Plus, +Cupboard Dry and ÔüIron Dry (depending on the model).
Degree of dryness can be finely adjusted; multi-layered textiles require a longer drying time than single-layered items of clothing. Recommendation: Dry separately
9205 / 9000787977 *787977* Siemens Electrogeräte GmbH
Carl-Wery-Str. 34
81739 München/Germany
WT44C101GC
8
Installation
– Delivery includes: dryer, installation and instruction manual.
– Check dryer for transport damage.
– The dryer is very heavy. Do not lift without assistance.
– Be careful to avoid sharp edges.
– Do not lift the dryer by protruding parts (e.g. the door) - risk of breakage.
– Do not install in a room which is susceptible to frost. Water may cause damage once it
starts to freeze.
– If in doubt, have the appliance connected by a specialist.
Setting up the dryer
– The appliance plug must always be accessible.
– Ensure that the appliance is installed on a clean,
level and firm surface.
– Do not obstruct the air inlet on the front of the
dryer.
– Keep the area around the dryer clean.
– Level the dryer using the front threaded feet.
On no account remove the threaded feet.
Mains connection For safety instructions, a see page 11.
– Connect to an AC earthed socket. If in doubt have the socket checked by a specialist.
– The mains voltage must be the same as the voltage specified on the rating plate
( a see page 9).
– The connected load and necessary fuse protection are specified on the rating plate.
Frost protection / Transport
Preparation
Empty the container for condensation a see page 4.
There may be residual water in the dryer.
This can leak out if the dryer is at an angle.
1.
Remove all accessories from
the drum. The drum must be
empty.
Make sure that the air
inlet remains unobstructed
Clean and level
2.
Do not operate the dryer if there
is a danger of frost.
Do not install the dryer behind a door or a sliding
door which could obstruct the door of the dryer or
prevent it from being opened. Children can then
not be trapped inside and their life endangered.
ʠ
a
ʠÊ+cÔüÏü+c
ʠʠÈ¡°l
a
ʠÈ¡°l
aa
ʠʠʠʠʠ
aaaaaa
ʠ
a
ʠ
a
ʠ
aa
ʠ
aaaaaaaaa

c@c c
ÊÏÔc÷@c +@+@Êa++Ôü
aaa
Remove all accessories from
Do not operate the dryer if there
9
Technical data
ʠDimensions (DxWxH) 60 x 60 x 85 cm
Weight approximately 35 kg
Max. capacity 7 kg
Condensation container approx. 4.2 l
Ambient temperature 5 - 35 °C
Connection voltage 220 - 240 V
Connected load 2025/2600 W
Fuse protection 13 A
Product number
a Rating plate or inside of the door
Production number
You can find the rating plate on the back of the dryer.
ʠConsumption rates Specifications are average values established under normal
operating conditions. Fluctuations of up to 10 % are possible.
Spin speed in rpm
(residual moisture)
Drying time** in
min incl. 8 min
cooling time
Energy
consumption**
in kWh
ÊCottons 7 kg 13 A 13 A
+cCupboard Dry* 1400 (approx. 50 %) 90 3.32
1000 (approx. 60 %) 106 3.92
800 (approx. 70 %) 120 4.48
ÔüIron Dry* 1400 (approx. 50 %) 66 2.45
1000 (approx. 60 %) 82 2.94
800 (approx. 70 %) 96 3.43
ÏüEasy-Care 3.5 kg
+cCupboard Dry* 800 (approx. 40 %) 40 1.16
600 (approx. 50 %) 45 1.45
*Test programmes according to DIN EN 61121.
**The values may diverge from those specified depending on over and
undervoltage, fabric type, composition of the laundry to be dried, residual moisture
in the fabric and the amount of the load.
Optional accessories (order from the after-sales service using the order number)
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. The dryer must be fastened on the washing machine with this connection set.
If the worktop of the washing machine is less than 544 mm deep, please consult the
after-sales service or your specialist retailer.
WZ
20311
10
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales
service. We will always find an appropriate solution and will avoid unnecessary visits by
engineers. Trust the expertise of the manufacturer and rest assured that the repair will be
carried out by trained service technicians using original spare parts. The contact details of your
local after-sales service can be found in the enclosed after-sales service directory, or by
calling one of these numbers:
–GB 0844 8928999 (Calls from a BT ladline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
–IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
ʠStart indicator lamp does not
light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠEmpty È/ Clean ¡°lindicator
lights up.
Empty container for condensation a see page 4.
ʠEmpty È/ Clean ¡°lindicator
light flashes.
Clean the fluff filter under running water a see page 4.
Clean the air cooler, if required a see page 6.
ʠDryer does not start. Has the Start button been pressed?
Door closed?
Programme set?
ʠProgramme terminated shortly
after the start.
Ambient temperature greater than 5 °C?
ʠWater is leaking out. Make sure the dryer is level.
ʠThe door opens by itself. Push the door closed until you hear it engage.
ʠThe required degree of dryness
was not achieved or the drying
time was too long.
Clean the fluff filter under running water a see page 4.
Empty the container for condensation.
Ambient temperature higher than 35 °C a ventilate the
room.
Air inlet may be blocked
a clear obstruction.
Unsuitable programme selected? a see page 7.
Dryer installed too closely to other objects? Provide
adequate air circulation.
Mains failure
a Restart the dryer.
Fine layer of limescale on the moisture sensors. Clean the
sensors a see page 6.
ʠLaundry damp. Use the next drying programme up or use the timed
programme as a supplement a see page 7.
Warm laundry feels damper than it really is!
ʠThe humidity in the room has
increased significantly.
Make sure the room is sufficiently ventilated.
Air inlet blocked? a Clear obstruction.
Make sure that the air cooler is inserted.
ʠOne or more indicator lights are
flashing.
Clean the fluff filter and air cooler a see page 4/6.
Check the installation conditions a see page 8.
Switch off, allow to cool, switch back on and restart the
programme.
ʠPower failure. Remove the laundry from the dryer immediately and
spread it out. Heat may escape.
aaaaaaaaa

c@c c
ÊÏÔc÷@c +@+@Êa++Ôü
aaa
Remove all accessories from
Do not operate the dryer if there
ʠ
a
ʠÊ+cÔüÏü+cʠʠÈ¡°l
a
ʠÈ¡°l
aa
ʠʠʠʠʠ
aaaaaa
ʠ
a
ʠ
a
ʠ
aa
ʠ
11
Safety instructions
Emergency – Pull the appliance plug out of the socket immediately or disconnect the fuse.
ONLY use the
dryer...
– in rooms inside the house.
– use for drying fabrics.
The dryer must
NEVER...
– be used for other purposes than those described above.
– be modified in terms of its technology or attributes.
Dangers – The dryer must not be used by children or persons who have not been
instructed in its use.
– Do not leave children unsupervised near the dryer.
– Keep pets away from the dryer.
– Remove all objects from the pockets of garments.
Pay particular attention to cigarette lighters
a risk of explosion.
– Do not lean or sit on the door a risk of tipping.
– Open the door with care. Hot steam may escape.
Installation – Fasten down loose leads a risk of tripping.
– Do not operate the dryer where there is a risk of frost.
Mains
connection
– Connect the dryer according to specifications to an AC earthed socket, as
otherwise it cannot be guaranteed that the appliance is completely safe.
– The cable cross-section must be sufficient.
– Only use earth-leakage circuit breakers with the following symbol:
– The appliance plug and socket must be compatible.
– Do not use multiple plugs/couplings and/or extension cables.
– Do not touch or hold the appliance plug with wet hands a risk of electric
shock.
– Never pull the appliance plug out of the socket by its cable.
– Do not damage the mains lead a risk of electric shock.
Operation – Only load the drum with items of laundry.
Check what has been loaded before switching the dryer on.
– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nail polish remover, stain remover,
cleaning solvent, etc.) a fire/explosion hazard.
– Hazard due to dust (e.g. coal dust, flour):
do not use the dryer a risk of explosion.
– Do not put laundry containing foamed material/rubber in the dryer a elastic
material may be destroyed and the dryer may be damaged due to possible
deformation of the foamed material.
– Switch off the dryer once the programme has ended.
– The water from condensation is not drinking water and may be contaminated
with fluff.
Defect – Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out by the after-sales service.
– Do not use the dryer with a faulty mains cable. In order to avoid risk, have the
mains lead replaced only by our after-sales service.
Spare parts – Only use genuine spare parts and accessories for safety reasons.
Disposal – Dryer: pull out the mains plug, then cut the mains cable from the appliance.
Dispose of the appliance at a public disposal facility.
– Packaging: Do not allow children access to items of packaging
a risk of suffocation.
– All materials are environmentally friendly and reusable. Dispose of in an
environmentally responsible manner.
Operating
and installation instructions
en
Observe the safety
instructions on
page 11.
Read these instructions before switching
on the dryer.
Tumble dryer