Siemens ET6 NF Q Series User manual

ET6..NF..Q
Hob
EN User manual and installation instructions
Siemens Home Appliances
Register your appliance on My Siemens and
discover exclusive services and offers.

2Ø = cm
ET6..NF..Q

Safety en
3
Further information and explanations are available online:
Table of contents
INFORMATION FOR USE
1 Safety...................................................................3
2 Preventing material damage ..............................4
3 Environmental protection and saving en-
ergy ......................................................................5
4 Familiarising yourself with your appliance .......6
5 Basic operation ...................................................7
6 Electronic boil start control................................8
7 Childproof lock..................................................10
8 Automatic switch-off.........................................10
9 Power manager .................................................10
10 Wipe protection.................................................10
11 Energy consumption display ...........................10
12 Basic settings....................................................11
13 Cleaning and servicing.....................................11
14 Troubleshooting................................................11
15 Disposal.............................................................13
16 Customer Service..............................................13
17 INSTALLATION INSTRUCTIONS ......................13
17.1 Safe installation ................................................13
1 Safety
Observe the following safety instructions.
1.1 General information
¡Read this instruction manual carefully.
¡Keep the instructions, the appliance and
the product information safe for future refer-
ence or for the next owner.
¡Do not connect the appliance if it has been
damaged in transit.
1.2 Intended use
Only a licensed professional may connect ap-
pliances without plugs. Damage caused by in-
correct connection is not covered under the
warranty.
Only use this appliance:
¡To prepare meals and drinks.
¡Under supervision. Never leave the appli-
ance unattended when cooking for short
periods.
¡in private households and in enclosed
spaces in a domestic environment.
¡up to an altitude of max. 2000m above
sea level.
Do not use the appliance:
¡With an external timer or a separate remote
control. This does not apply if operation
with appliances included in EN 50615 is
switched off.
1.3 Restriction on user group
This appliance may be used by children aged
8 or over and by people who have reduced
physical, sensory or mental abilities or inad-
equate experience and/or knowledge,
provided that they are supervised or have
been instructed on how to use the appliance
safely and have understood the resulting
dangers.
Do not let children play with the appliance.
Children must not perform cleaning or user
maintenance unless they are at least 15 years
old and are being supervised.
Keep children under the age of 8 years away
from the appliance and power cable.
1.4 Safe use
WARNING‒Risk of fire!
Leaving fat or oil cooking on an unattended
hob can be dangerous and may lead to fires.
▶Never leave hot oil or fat unattended.
▶Never attempt to extinguish a fire using wa-
ter; instead, switch off the appliance and
then cover with a lid or a fire blanket.

en Preventing material damage
4
The cooking surface becomes very hot.
▶Never place flammable objects on the
cooking surface or in its immediate vicinity.
▶Never place objects on the cooking sur-
face.
The appliance will become hot.
▶Do not keep combustible objects or aero-
sol cans in drawers directly underneath the
hob.
Hob covers can cause accidents, for example
due to overheating, catching fire or materials
shattering.
▶Do not use hob covers.
Food may catch fire.
▶The cooking process must be monitored. A
short process must be monitored continu-
ously.
WARNING‒Risk of burns!
The appliance and its parts that can be
touched become hot during use, particularly
the hob surround, if fitted.
▶Caution should be exercised here in order
to avoid touching heating elements.
▶Young children under 8 years of age must
be kept away from the appliance.
Hob protective grilles may cause accidents.
▶Never use hob protective grilles.
The appliance becomes hot during operation.
▶Allow the appliance to cool down before
cleaning.
WARNING‒Risk of electric shock!
Improper repairs are dangerous.
▶Repairs to the appliance should only be
carried out by trained specialist staff.
▶Only use genuine spare parts when repair-
ing the appliance.
▶If the power cord of this appliance is dam-
aged, it must be replaced by trained spe-
cialist staff.
If the appliance or the power cord is dam-
aged, this is dangerous.
▶Never operate a damaged appliance.
▶If the surface is cracked, you must switch
off the appliance in order to prevent a pos-
sible electrical shock. To do this, switch off
the appliance via the fuse in the fuse box
rather than at the main switch.
▶Call customer services. →Page13
An ingress of moisture can cause an electric
shock.
▶Do not use steam- or high-pressure clean-
ers to clean the appliance.
The insulation on cables of electrical appli-
ances may melt if it touches hot parts of the
appliance.
▶Never bring electrical appliance cables into
contact with hot parts of the appliance.
WARNING‒Risk of injury!
Saucepans may suddenly jump due to liquid
between the saucepan base and the hotplate.
▶Always keep hotplates and saucepan
bases dry.
WARNING‒Risk of suffocation!
Children may put packaging material over
their heads or wrap themselves up in it and
suffocate.
▶Keep packaging material away from chil-
dren.
▶Do not let children play with packaging ma-
terial.
Children may breathe in or swallow small
parts, causing them to suffocate.
▶Keep small parts away from children.
▶Do not let children play with small parts.
Preventing material damage
2 Preventing material damage
ATTENTION!
Rough pot and pan bases will scratch the ceramic.
▶Check your cookware.
Boiling pans dry may damage cookware or the appli-
ance.
▶Never place empty pans on a heated hotplate or al-
low to boil dry.
Incorrectly positioned cookware can cause the appli-
ance to overheat.
▶Never place hot pots or pans on the controls or the
hob surround.
Damage can occur if hard or pointed objects fall onto
the hob.
▶Do not let hard or pointed objects fall onto the hob.
Non heat-resistant materials will melt on heated hot-
plates.
▶Do not use oven protective foil.
▶Do not use aluminium foil or plastic containers.

Environmental protection and saving energy en
5
2.1 Overview of the most common damage
Here you can find the most common types of damage
and tips on how to avoid them.
Damage Cause Measure
Stains Food boiling
over
Remove boiled-over food
immediately with a glass
scraper.
Stains Unsuitable
cleaning
products
Only use cleaning
products that are suitable
for glass ceramic.
Scratch
es
Salt, sugar or
sand
Do not use the hob as a
work surface or storage
space.
Damage Cause Measure
Scratch
es
Rough pot or
pan bases
Check your cookware.
Discol-
ouration
Unsuitable
cleaning
products
Only use cleaning
products that are suitable
for glass ceramic.
Discol-
ouration
Pan abrasion,
e.g. aluminium
Lift pots and pans to
move on the hob.
Blisters Sugar or food
with a high
sugar content
Remove boiled-over food
immediately with a glass
scraper.
Environmental protection and saving energy
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
▶Sort the individual components by type and dispose
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less energy.
Select the cooking zone to match the size of your
pan. Centre the cookware on the hob.
Use cookware whose base diameter is the same dia-
meter as the hotplate.
Tip:Cookware manufacturers often give the upper
diameter of the saucepan. It is often larger than the
base diameter.
¡Unsuitable cookware or incompletely covered cook-
ing zones consume a lot of energy.
Cover saucepans with suitable lids.
¡Cooking without a lid consumes considerably more
energy.
Lift lids as infrequently as possible.
¡When you lift the lid, a lot of energy escapes.
Use a glass lid.
¡You can see into the pan through a glass lid
without having to lift it.
Use pots and pans with flat bases.
¡Uneven bases increase energy consumption.
Use cookware that is suitable for the quantity of food.
¡Large items of cookware containing little food need
more energy to heat up.
Cook with only a little water.
¡The more water that is contained in the cookware,
the more energy is required to heat it up.
Turn down to a lower power level early on.
¡If you use an ongoing power level that is too high,
you will waste energy.
Take advantage of the hob's residual heat. With
longer cooking times switch off the hotplate
5-10minutes before the end of cooking.
¡Unused residual heat increases energy consump-
tion.

en Familiarising yourself with your appliance
6
Familiarising yourself with your appliance
4 Familiarising yourself with your appliance
The instruction manual is the same for various different
hobs. You can find the hob dimensions in the overview
of models. →Page2
4.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
4.2 Indicators/symbols
The displays show selected values and functions.
Display Name
⁠- Heat settings
/ Residual heat
Electronic boil start control
4.3 Touch fields
Touch fields are touch-sensitive surfaces. To select a
function, touch the relevant field.
Touch
field
Name
Main switch
Electronic boil start control
Hotplate selection
Childproof lock
Wipe protection
Settings range
or Automatic zone control
Notes
¡Always keep the control panel dry. Moisture impairs
the function.
¡Do not pull pans close to the displays and touch
fields. The electronics may overheat.
4.4 Hotplates
You can find an overview of the different connections
for the hotplates here.
If you activate the connections, the relevant displays
light up.
If you switch on a hotplate, it will switch to the setting
last selected.
Hot-
plate
Name Activating and deactivating
Single-circuit
cooking zone
Select a hotplate.
⁠ Dual-circuit
hotplate
Select hotplate and touch
or ⁠.
Notes
¡Dark areas in the glow pattern of the hotplate are
part of the technical design. They do not affect the
functionality of the hotplate.
¡The hotplate regulates the temperature by switching
the heat on and off. The heat may also switch on
and off when at the highest setting.
¡With multi-circuit hotplates, the heating of the hot-
plate and the activated areas may switch on or off
at different times.
Reasons:
–Easily damaged components are protected
against overheating.
–The appliance is protected against electrical
overload.
–This achieves a better cooking result.
4.5 Residual heat indicator
The hob has a two-stage residual heat indicator for
each hotplate. Do not touch the hotplate while the re-
sidual heat indicator is lit up.

Basic operation en
7
Display Meaning
The hotplate is so hot that you can
keep small dishes warm or melt cook-
ing chocolate.
Display Meaning
The hotplate is hot.
Basic operation
5 Basic operation
5.1 Switching the hob on or off
The main switch is used to switch the hob on and off.
If you switch the appliance back on again within
4seconds after switching off, the hob will start up with
the previously stored settings.
5.2 Switching on the hob
▶Touch .
aThe indicator lamp above lights up.
aThe displays light up.
aThe hob is ready for use.
5.3 Switching off the hob
The hob will switch off automatically when all hotplates
have been switched off for a while (10-60seconds).
▶Touch .
aThe indicator lamp above goes out.
aThe displays go out.
aAll hotplates are switched off.
aThe residual heat indicator remains on until the hot-
plates have cooled down sufficiently.
5.4 Setting the hotplates
To set a hotplate, it has to be selected.
Select the required heat setting on the control panel.
Heat setting
1 Lowest setting
9 Highest setting
. Every heat setting has an intermediate
setting, e.g. 4. .
5.5 Selecting heat settings
Requirement:The hob is switched on.
1. Select the hotplate with ⁠.
a lights up in the heat setting indicator. lights up
under the heat setting indicator.
2. Select a heat setting on the control panel.
5.6 Changing heat settings
1. Select the hotplate with .
2. Select a heat setting on the control panel.
5.7 Switching off the hotplate
1. Select the hotplate with ⁠.
2. Select 0 on the control panel.
aAfter approx. 10seconds the residual heat indicator
appears.
Note:The hotplate last selected remains activated. You
can adjust the hotplate without selecting it again.
5.8 Recommended cooking settings
You can find an overview of different foods with appro-
priate power levels here.
The cooking time varies depending on the type, weight,
thickness and quality of the food. The ongoing power
level depends on the cookware used.
Cooking tips
¡To bring food to the boil, use heat setting 9.
¡Stir thick liquids occasionally.
¡Food that needs to be seared quickly or that initially
loses a lot of liquid during frying should be fried in
small portions.
¡Tips for saving energy when cooking. →Page5
Melting
Food Ongoing
cooking
setting
Ongoing
cooking
time in
minutes
Chocolate, cooking chocolate 1-1. -
Butter, honey, gelatine 1-2 -

en Electronic boil start control
8
Heating or keeping warm
Stew, e.g. lentil stew 1-2 -
Milk11.-2. -
Sausages in water13-4 -
1Prepare the dish without the lid.
Defrosting and heating
Spinach, frozen 2.-3. 10-20
Goulash, frozenGoulash, frozen 2.-3. 20-30
Poaching or simmering
Dumplings1, 2 4.-5. 20-30
Fish1, 2 4-5 10-15
White sauce, e.g. béchamel 1-2 3-6
Whisked sauces, e.g. sauce
béarnaise or hollandaise
3-4 8-12
1Bring the water to the boil with the lid on.
2Continue to cook the dish without a lid.
Boiling, steaming or stewing
Rice with double the volume of
water
2-3 15-30
Rice pudding 1.-2. 35-45
Potatoes boiled in their skin 4-5 25-30
Boiled potatoes 4-5 15-25
Pasta, noodles1, 2 6-7 6-10
Stew, soup 3.-4. 15-60
Vegetables, fresh 2.-3. 10-20
Vegetables, frozen 3.-4. 10-20
Food in a pressure cooker 4-5 -
1Bring the water to the boil with the lid on.
2Continue to cook the dish without a lid.
Braising
Roulades 4-5 50-60
Pot roast 4-5 60-100
Goulash 2.-3. 50-60
Frying with little oil
Fry food without a lid.
Escalope, plain or breaded 6-7 6-10
Escalope, frozen 6-7 8-12
Chops, plain or breaded16-7 8-12
Steak, 3cm thick 7-8 8-12
Patties, 3cm thick14.-5. 30-40
Hamburgers, 2cm thick16-7 10-20
Poultry breast, 2cm thick15-6 10-20
Poultry breast, frozen15-6 10-30
Fish or fish fillet, plain 5-6 8-20
Fish or fish fillet, breaded 6-7 8-20
Fish or fish fillet, breaded and
frozen, e.g. fish fingers
6-7 8-12
Scampi, prawns 7-8 4-10
Vegetables or mushrooms,
fresh, sautéing
7-8 10-20
Vegetables or meat in strips
cooked Asian-style
7.-8. 15-20
Stir fry, frozen 6-7 6-10
Pancakes 6-7 one by
one
Omelette 3.-4. one by
one
Fried eggs 5-6 3-6
1Turn the dish several times.
Deep-frying
Deep-fry food in 1–2l oil in batches, 150–200g per
batch. Cook food without a lid.
Frozen products, e.g. chips or
chicken nuggets
8-9 -
Croquettes, frozen 7-8 -
Meat, e.g. chicken 6-7 -
Fish, breaded or battered 5-6 -
Vegetables or mushrooms,
breaded or battered
Tempura
5-6 -
Small pastries, e.g. doughnuts,
fruit in batter
4-5 -
Electronic boil start control
6 Electronic boil start control
The electronic boil start control heats the hotplate using
the highest heat setting and then switches down to the
ongoing cooking setting you have selected.
The time taken for the hotplate to heat up depends on
the ongoing cooking setting selected.
6.1 Setting the electronic boil start control
The electronic boil start control can only be activated in
the first 30 seconds after switching on the hotplate.
1. Select the required ongoing cooking setting for the
hotplate.
2. Touch ⁠.
aThe electronic boil start control is activated.
a and the ongoing cooking setting flash alternately
on the display.
aAfter the food has been brought to the boil, only the
ongoing cooking setting remains lit on the display.

Electronic boil start control en
9
6.2 Recommended settings for cooking with electronic boil start control
The values given here are guidelines. The smaller
quantities given are for the smaller hotplates and the
larger ones for the larger hotplates.
Cooking tips
¡Electronic boil start control is designed for cooking
with little water. This function is not suitable for food
cooked in a lot of water, e.g. pasta.
¡Cover the saucepan with a lid.
¡Stir thick liquids occasionally.
¡Add max. 3cups of water to the food when cooking
on large hotplates or max. 2cups of water on small
hotplates.
Heating
Food Quantity Heat setting Total cooking time in
minutes
Stock 500ml - 1l A 7-8 4-7
Thickened soups 500ml - 1l A 2-3 3-6
Milk1200-400ml A 1-2 4-7
1Prepare the dish without the lid.
Heating and keeping warm
Stew, e.g. lentil stew 400-800g A 1-2 -
Defrosting and heating
Spinach, frozen 300-600g A 2.-3. 10-20
Goulash, frozen 500g-1kg A 2.-3. 20-30
Poaching
Fish1, 2 300-600g A 4-5 20-25
1Bring the water to the boil with the lid on.
2Continue to cook the dish without a lid.
Boiling
Rice with double the
volume of water
120-250g A 2-3 20-25
Unpeeled boiled potatoes
with 1-3cups water
750g - 1kg A 4-5 30-40
Boiled potatoes with
1-3cups water
750g - 1kg A 4-5 20-30
Vegetables with 1-3cups
water
500g - 1kg A 2.-3. 15-20
Frozen vegetables with
1-3cups water
500g - 1kg A 4.-5. 15-20
Stewing
Beef olives x 4 A 4-5 50-60
Pot-roasting 1kg A 4-5 80-100
Frying
Fry food without a lid.
Escalope, plain or breaded x 1-2 A 6-7 8-12
Cutlet, plain or breaded1x 1-2 A 6-7 8-12
Steak, 3cm thick x 1-2 A 7-8 8-12
Fish or fish fillet, breaded x 1-2 A 6-7 8-12
1Turn the dish several times.

en Childproof lock
10
Fish or fish fillet, breaded
and frozen, e.g. fish fingers
200-300g A 6-7 8-12
Pancakes - A 6-7 fry one after the other
1Turn the dish several times.
Childproof lock
7 Childproof lock
You can use the childproof lock to prevent children
from switching on the hob.
7.1 Activating the childproof lock
Requirement:The hob is switched off.
▶Press and hold ⁠ for approx. 4seconds.
aThe indicator light above lights up for
10seconds.
aThe hob is locked.
7.2 Deactivating the childproof lock
▶Press and hold ⁠ for approx. 4seconds.
aThe lock is released.
7.3 Automatic childproof lock
This function automatically activates the childproof lock
when you switch off the hob.
The automatic childproof lock can be activated in the
basic settings. →Page11
Automatic switch-off
8 Automatic switch-off
If you do not change the settings of a hotplate for a
long time, automatic switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1to 10hours).
The heat to the hotplate is switched off. and the re-
sidual heat indicator ⁠/ flash alternately on the hot-
plate display.
8.1 Continuing cooking after automatic
switch-off
1. Touch any touch field.
aThe display goes out.
2. Reset.
Power manager
9 Power manager
The power manager limits the maximum power con-
sumption of the appliance to the value specified on the
rating plate.
When the power limit is reached, the appliance auto-
matically selects the maximum possible heat settings.
The heat setting indicator shows the heat setting and
briefly ⁠.
Wipe protection
10 Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
10.1 Activating wipe protection
▶Touch ⁠ .
aA signal sounds.
aThe indicator lamp above ⁠ lights up.
aThe control panel is locked for 30 seconds.
Energy consumption display
11 Energy consumption display
This function indicates the total amount of energy con-
sumed between switching the hob on and switching it
off again.
Once switched off, the energy consumption is dis-
played in kilowatt hours, e.g. 1.08kWh, for
10seconds.
The accuracy of the display depends on various factors
such as the voltage quality of the power supply.
The display can be activated in the basic settings.
→Page11

Basic settings en
11
Basic settings
12 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
12.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis-
play
Selection
Automatic childproof lock
– Switched off1
– Switched on
– Manual and automatic childproof lock are
switched off.
Signal tone
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.1
⁠ ⁠ Activation of the heating elements
– Switched off
– Switched on
– The last setting before switching off the
hotplate.1
1Factory setting
Dis-
play
Selection
Time for selecting hotplates
– Unlimited: The last hotplate selected can
always be adjusted without having to select it
again.1
– You can adjust the last hotplate selected
within 10seconds after selecting it. After this
time you have to select the hotplate again be-
fore adjusting it.
Resetting to the factory settings
– Switched off.1
– Switched on.
1Factory setting
12.2 Changing basic settings
Requirement:The hob is switched off.
1. Switch on the hob.
2. Within the next 10seconds press and hold for
approx. 4seconds.
a and flash alternately on the left-hand display.
a lights up on the right-hand display.
3. Repeatedly touch until the required indicator ap-
pears on the left-hand display.
4. Set the required value on the control panel.
5. Press and hold for 4seconds.
aThe setting is activated.
Tip:To exit the basic settings without saving, switch off
the hob using . Switch the hob on again and reset.
Cleaning and servicing
13 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
13.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, the online shop or a
retailer.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶Never use unsuitable cleaning products.
Unsuitable cleaning products
¡Undiluted detergent
¡Detergent intended for dishwashers
¡Abrasive cleaners
¡Aggressive cleaning products such as oven spray
or stain remover
¡Abrasive sponges
¡High-pressure or steam jet cleaners
13.2 Cleaning the glass ceramic
Clean the hob after every use to stop cooking residues
from getting burnt on.
Note:Note the information on unsuitable cleaning
products. →Page11
Requirement:The hob has cooled down.
1. Remove heavy soiling using a glass scraper.
2. Clean the hob with a cleaning product for glass
ceramic.
Follow the cleaning instructions on the product
packaging.
Tip:You can achieve good cleaning results using a
special sponge for glass ceramic.
Troubleshooting
14 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.

en Troubleshooting
12
WARNING‒Risk of injury!
Improper repairs are dangerous.
▶Repairs to the appliance should only be carried out
by trained specialist staff.
▶If the appliance is defective, call Customer Service.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
▶Repairs to the appliance should only be carried out
by trained specialist staff.
▶Only use genuine spare parts when repairing the
appliance.
▶If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
WARNING‒Risk of burns!
The hotplate heats up but the display does not work.
▶Switch off the fuse in the fuse box.
▶Call the customer service.
WARNING‒Risk of fire!
The hob switches off automatically and can no longer
be operated. It may switch on unintentionally at a later
point.
▶Switch off the fuse in the fuse box.
▶Call the customer service.
14.1 Information on display panel
Fault Cause and troubleshooting
None There has been a power cut.
1. Check the household fuse for the appliance.
2. Check whether there has been a power failure by trying other electrical appliances.
All displays flash The control panel is wet or objects are lying on it.
▶Dry the control panel or remove the object.
Several hotplates have been used over a prolonged period at high power settings. The hot-
plate has been switched off to protect the electronics.
1. Wait a while.
2. Touch any touch field.
aWhen the message no longer appears, the electronics have cooled down sufficiently.
You can continue to cook.
Despite being switched off by , the electronics have become hot again. All hotplates have
therefore been switched off.
1. Wait a while.
2. Touch any touch field.
aWhen the message no longer appears, the electronics have cooled down sufficiently.
You can continue to cook.
and the heat set-
ting flash alternately.
A signal sounds.
Hot pot near the control panel. There is a risk that the electronics will overheat.
▶Remove the pan.
aThe display goes out shortly afterwards.
and audible signal Hot pot near the control panel. The hotplate has been switched off to protect the electron-
ics.
1. Remove the pot.
2. Wait a while.
3. Touch any touch field.
aWhen the message no longer appears, the electronics have cooled down sufficiently.
You can continue to cook.
The hotplate was on for too long and has switched off automatically.
You can switch the hotplate back on again immediately.
and hotplates do
not heat up
Demo mode is activated.
1. Disconnect the appliance from the power supply for 30seconds by briefly switching off
the circuit breaker in the fuse box.
2. Touch any touch field within the next threeminutes.
A message with "E"
appears on the dis-
play, e.g. E0111.
The electronics have detected a fault.
1. Switch the appliance off and on again.
aIf the fault was a one-off, the message disappears.
2. If the message appears again, call the after-sales service. Please specify the exact error
message when calling.
→"Customer Service", Page13

Disposal en
13
Disposal
15 Disposal
15.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
▶Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.
Customer Service
16 Customer Service
Detailed information on the warranty period and terms
of warranty in your country is available from our after-
sales service, your retailer or on our website.
If you contact Customer Service, you will require the
product number (E-Nr.) and the production number
(FD) of your appliance.
The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our
website.
16.1 Product number (E-Nr.) and production
number (FD)
You can find the product number (E-Nr.) and the pro-
duction number (FD) on the appliance's rating plate.
The rating plate can be found:
¡on the appliance certificate.
¡on the lower section of the hob.
Make a note of your appliance's details and the Cus-
tomer Service telephone number to find them again
quickly.
Installation instructions
17 Installation instructions
Observe this information when installing the appliance.
17.1 Safe installation
Follow these safety instructions when in-
stalling the appliance.
¡Electrical connection must only be carried
out by licensed specialist staff. Incorrect
connection will invalidate the warranty.
¡The safe operation of this appliance can
only be guaranteed if it has been installed
to a professional standard in accordance
with these installation instructions. The in-
staller shall be liable for any damage result-
ing from incorrect installation.
17.2 Built-under
Do not install refrigerators, dishwashers, non-ventilated
ovens or washing machines underneath the appliance.
¡If you fit an oven below the appliance, the worktop
must be at least 20mm thick, in certain cases even
thicker. Observe the information in the oven installa-
tion instructions.
¡Make sure that projecting parts such as the mains
housing or the mains cable do not collide, e.g. with
a drawer.
17.3 Intermediate floor
If the underside of the hob can be touched, an interme-
diate floor must be fitted.
¡Ask your specialist retailer for an intermediate floor
as an accessory.
¡If you use your own intermediate floor, the minimum
distance to the mains connection of the appliance
must be 10mm.
17.4 Preparing the units
The worktop must be level, horizontal and stable.
¡The fitted units, including wall finishing strips, must
be heat-resistant to at least 90°C.
¡Niche cladding within 50mm of the back wall must
not be combustible (e.g. tiles, stone).

en Installation instructions
14
¡Seal the cut surfaces to make them heat-resistant.
This prevents the worktop from swelling as a result
of moisture.
17.5 Electrical connection
To protect the device, only remove the device from the
styrofoam shells when you press the device into the
cut-out. Never place the device upright on one side of
the device.
¡Check the household wiring before connecting the
appliance.
¡The appliance fulfils the requirements of protection
classI and must only be operated in conjunction
with an earth conductor.
¡In the permanent electrical installation, a partition
must be provided in the phases in accordance with
the installation regulations.
¡If appears on the appliance's display, it has
not been connected correctly. Disconnect the appli-
ance from the mains and check the connection.
Connecting with a 3-wire cable
Ensure that there is sufficient fuse protection for the
household wiring.
Observe the colour coding of the power cable.
¡The protective conductor is green/yellow ⁠.
¡The neutral conductor is blue.
¡The phase (external conductor) is brown.
¡If required, the cable must be replaced with a multi-
phase power cable. When replacing the cable, ob-
serve the following paragraph.
Connecting without a pre-installed cable
Only connect the hob in accordance with the connec-
tion diagram.
¡If required, install the enclosed copper bridges.
¡The power cable must correspond to typeH05VV-F
or a higher rating.
¡Use the current load to determine which wire cross-
section you require. A cross-section of <1.5mm² is
not permitted.
Connecting with a pre-installed 5-wire power
cable
The power cable must only be replaced by trained cus-
tomer service personnel.
17.6 Installing the hob
Do not trap the power cable and do not route it over
sharp edges.
¡If the oven is a built-under type, route the cable
along the rear corners of the oven to the mains
socket.
¡The hob can also be installed in an existing cut-out
that has a depth of 500 mm.
¡It must protrude by the same distance at the front
and the rear.
17.7 Removing the hob
1. Disconnect the appliance from the power supply.
2. Push out the hob from below.

*9001909567*
9001909567 (031120)
en
EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
siemens-home.bsh-group.com