Siemens SIMATIC ET 200SP User manual

Manual
Analog input module
AI Energy Meter 400VAC ST
(6ES7134-6PA01-0BD0)
ET 200SP
Edition
SIMATIC
10/2017 support.industry.siemens.com

___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC
ET 200SP
Analog input module
AI Energy Meter 400VAC ST
(6ES7134-6PA01-0BD0)
Manual
10/2017
A5E36061895
-AB
Preface
Documentation guide
1
Product overview
2
Wiring
3
Configuration / address
space
4
Quick start
5
Reading and processing
measured values
6
Energy counters
7
Parameters
8
Interrupts/diagnostic alarms
9
Technical specifications
10
Parameter data records
A
Measured variables
B
Module versions
C
User data variants
D
Measured value data records
E
Tips and tricks
F

Siemens AG
Division Digital Factory
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E36061895-AB
Ⓟ
08/2017 Subject to change
Copyright © Siemens AG 2015 - 2017.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
4Manual, 10/2017, A5E36061895-AB
Preface
Purpose of the documentation
This manual supplements the system manual ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293). Functions that generally
relate to the system are described in this manual.
The information provided in this manual and in the system/function manuals supports you in
commissioning the system.
Changes compared to previous version
Changes/enhancements described in this manual, compared to the previous version:
●User data variant: Basic variables phase-specific measurement (ID 159 or 9FH) added
●Notes on the previous version of this manual have been taken into account in the current
edition.
Conventions
CPU: When the term "CPU" is used in this manual, it applies both to the CPUs of the
S7-1500 automation system and to the CPUs/interface modules of the distributed I/O system
ET 200SP.
STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the
configuration and programming software "STEP 7 (TIA Portal)".
Please also observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product and on the section of the documentation to which particular attention
should be
paid.

Preface
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
Manual, 10/2017, A5E36061895-AB 5
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens' products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be
connected to an enterprise network or the internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or network
segmentation) are in place.
For additional information on industrial security measures that may be implemented, please
visit (http://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customers' exposure
to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under (http://www.siemens.com/industrialsecurity).

Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
6Manual, 10/2017, A5E36061895-AB
Table of contents
Preface ................................................................................................................................................... 4
1 Documentation guide .............................................................................................................................. 8
2 Product overview .................................................................................................................................. 12
2.1 Area of application ................................................................................................................. 12
2.2 Properties of the AI Energy Meter 400VAC ST ..................................................................... 14
3 Wiring ................................................................................................................................................... 16
3.1 Terminal and block diagram................................................................................................... 16
3.2 Connection examples ............................................................................................................ 19
3.3 Current transformer selection data ........................................................................................ 20
4 Configuration / address space............................................................................................................... 23
4.1 Configuring............................................................................................................................. 23
4.2 Selecting the module versions ............................................................................................... 24
4.2.1 Changing over the user data variant during operation........................................................... 25
4.2.2 Recommendations for selecting the module version............................................................. 26
4.3 Applicable modules................................................................................................................ 27
5 Quick start ............................................................................................................................................ 28
6 Reading and processing measured values ............................................................................................ 30
6.1 Basics for reading measured values...................................................................................... 30
6.2 Quality information ................................................................................................................. 32
6.3 Reading measured values from user data cyclically.............................................................. 34
6.4 Read measured value from a measured value data record .................................................. 36
7 Energy counters.................................................................................................................................... 37
7.1 How the energy meter works ................................................................................................. 37
7.2 Configuring counters.............................................................................................................. 39
7.3 Evaluating energy counters ................................................................................................... 41
7.4 Reset energy counter............................................................................................................. 42
7.4.1 Introduction ............................................................................................................................ 42
7.4.2 Reset energy counters via user data ..................................................................................... 42
7.4.3 Resetting energy counters via data record DS 143 ............................................................... 44
7.4.4 Example for resetting energy counters via data record DS 143 ............................................ 46
7.5 Data record for energy counter (DS 143) .............................................................................. 49
7.5.1 Structure for energy counters (DS 143)................................................................................. 49
7.5.2 Structure of the control and feedback interface for DS 143................................................... 52

Table of contents
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
Manual, 10/2017, A5E36061895-AB 7
8 Parameters ........................................................................................................................................... 54
8.1 Parameters .............................................................................................................................54
8.2 Description of parameters.......................................................................................................57
9 Interrupts/diagnostic alarms .................................................................................................................. 61
9.1 Status and error display ..........................................................................................................61
9.2 Interrupts.................................................................................................................................63
9.2.1 Diagnostics interrupt ...............................................................................................................63
9.3 Diagnostic alarms ...................................................................................................................64
9.4 Diagnostics response..............................................................................................................65
10 Technical specifications ........................................................................................................................ 66
10.1 Technical specifications ..........................................................................................................66
A Parameter data records......................................................................................................................... 72
A.1 Configuration via parameter data records ..............................................................................72
A.2 Structure of the parameter data record 128 for the entire module .........................................73
B Measured variables............................................................................................................................... 80
C Module versions.................................................................................................................................... 85
C.1 Module version "2 I / 2 Q" .......................................................................................................85
C.2 Module version "32 I / 12 Q" ...................................................................................................88
D User data variants................................................................................................................................. 92
D.1 User data variants with 32 bytes input data / 12 bytes output data........................................92
E Measured value data records .............................................................................................................. 103
E.1 Overview of all measured value data records ......................................................................103
E.2 Measured value data record for base measurements (DS 142) ..........................................104
E.3 Structure for energy counters (DS 143)................................................................................106
F Tips and tricks..................................................................................................................................... 109
F.1 Tips and tricks.......................................................................................................................109

Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
8Manual, 10/2017, A5E36061895-AB
Documentation guide
1
The documentation for the SIMATIC ET 200SP distributed I/O system is arranged into three
areas.
This arrangement enables you to access the specific content you require.
Basic information
The system manual describes in detail the configuration, installation, wiring and
commissioning of the SIMATIC ET 200SP. distributed I/O system. The STEP 7 online help
supports you in the configuration and programming.
Device information
Product manuals contain a compact description of the module-specific information, such as
properties, wiring diagrams, characteristics and technical specifications.

Documentation guide
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
Manual, 10/2017, A5E36061895-AB 9
General information
The function manuals contain detailed descriptions on general topics regarding the SIMATIC
ET 200SP distributed I/O system, e.g. diagnostics, communication, Web server, motion
control and OPC UA.
You can download the documentation free of charge from the Internet
(http://w3.siemens.com/mcms/industrial-automation-systems-simatic/en/manual-
overview/tech-doc-et200/Pages/Default.aspx).
Changes and supplements to the manuals are documented in a Product Information.
You can download the product information free of charge from the Internet
(https://support.industry.siemens.com/cs/us/en/view/73021864).
Manual Collection ET 200SP
The Manual Collection contains the complete documentation on the SIMATIC ET 200SP
distributed I/O system gathered together in one file.
You can find the Manual Collection on the Internet
(http://support.automation.siemens.com/WW/view/en/84133942).
"mySupport"
With "mySupport", your personal workspace, you make the most of your Industry Online
Support.
In "mySupport" you can store filters, favorites and tags, request CAx data and put together
your personal library in the Documentation area. Furthermore, your data is automatically
filled into support requests and you always have an overview of your current requests.
You need to register once to use the full functionality of "mySupport".
You can find "mySupport" in the Internet (https://support.industry.siemens.com/My/ww/en).
"mySupport" - Documentation
In the Documentation area of "mySupport", you have the possibility to combine complete
manuals or parts of them to make your own manual.
You can export the manual in PDF format or in an editable format.
You can find "mySupport" - Documentation in the Internet
(http://support.industry.siemens.com/My/ww/en/documentation).

Documentation guide
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
10 Manual, 10/2017, A5E36061895-AB
"mySupport" - CAx Data
In the CAx Data area of "mySupport", you can have access the latest product data for your
CAx or CAe system.
You configure your own download package with a few clicks.
In doing so you can select:
●Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN
macro files
●Manuals, characteristics, operating manuals, certificates
●Product master data
You can find "mySupport" - CAx Data in the Internet
(http://support.industry.siemens.com/my/ww/en/CAxOnline).
Application examples
The application examples support you with various tools and examples for solving your
automation tasks. Solutions are shown in interplay with multiple components in the system -
separated from the focus in individual products.
You can find the application examples on the Internet
(https://support.industry.siemens.com/sc/ww/en/sc/2054).
TIA Selection Tool
With the TIA Selection Tool, you can select, configure and order devices for Totally
Integrated Automation (TIA).
This tool is the successor of the SIMATIC Selection Tool and combines the known
configurators for automation technology into one tool.
With the TIA Selection Tool, you can generate a complete order list from your product
selection or product configuration.
You can find the TIA Selection Tool on the Internet
(http://w3.siemens.com/mcms/topics/en/simatic/tia-selection-tool).

Documentation guide
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
Manual, 10/2017, A5E36061895-AB 11
SIMATIC Automation Tool
You can use the SIMATIC Automation Tool to run commissioning and maintenance activities
simultaneously on various SIMATIC S7 stations as a bulk operation independently of the
TIA Portal.
The SIMATIC Automation Tool provides a multitude of functions:
●Scanning of a PROFINET/Ethernet network and identification of all connected CPUs
●Address assignment (IP, subnet, gateway) and station name (PROFINET device) to a
CPU
●Transfer of the data and the programming device/PC time converted to UTC time to the
module
●Program download to CPU
●Operating mode switchover RUN/STOP
●Localization of the CPU by means of LED flashing
●Reading out CPU error information
●Reading the CPU diagnostic buffer
●Reset to factory settings
●Updating the firmware of the CPU and connected modules
You can find the SIMATIC Automation Tool on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/98161300).
PRONETA
With SIEMENS PRONETA (PROFINET network analysis), you analyze the plant network
during commissioning. PRONETA features two core functions:
●The topology overview independently scans PROFINET and all connected components.
●The IO check is a fast test of the wiring and the module configuration of a system.
You can find SIEMENS PRONETA on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/67460624).

Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
12 Manual, 10/2017, A5E36061895-AB
Product overview
2
2.1
Area of application
Introduction
Energy efficiency is playing an increasingly important role in industry. Rising energy prices,
increasing pressure to improve profitability and the growing awareness of climate protection
are important factors for reducing energy costs and for introducing an energy data
management system.
Where can you use the AI Energy Meter 400VAC ST?
AI Energy Meter 400VAC ST is designed for machine-level deployment in an ET 200SP
distributed I/O system. AI Energy Meter 400VAC ST records over 200 different electrical
measurement and energy values. It lets you create transparency about the energy
requirements of individual components of a production plant even down to the machine level.
Using the measured values provided by the AI Energy Meter 400VAC ST, you can determine
energy consumption and power consumption. You can determine consumption forecasts and
efficiency from the measured values. Power consumption measurements are relevant for
load management and maintenance. In addition, you can use the measurements for energy
reporting and for determining the CO2footprint.
Note
Measuring dangerous electrical quantities
The AI Energy Meter 400VAC ST is not tested according to DIN EN 61010
-2-030 and may
therefore not be used to verify, measure or monitor protective measur
es according to DIN
EN 61557.
Qualified personnel must ensure through additional measures that no danger ensues for
humans and the environment in case of an incorrect display.
TN and TT system
The AI Energy Meter 400VAC ST can be used in TN and TT systems.

Product overview
2.1 Area of application
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
Manual, 10/2017, A5E36061895-AB 13
Measuring with AI Energy Meter 400VAC ST
A typical supply network of a production plant is usually divided into three voltage ranges:
●The infeed of the entire plant
●The subdistribution, for example, to individual lines within the plant
●The end consumers such as the machines in the lines.
The following figure shows the measurement in an electricity supply network:
Figure 2-1 Use of the AI Energy Meter 400VAC ST
Advantages of the AI Energy Meter 400VAC ST
The AI Energy Meter 400VAC ST has the following advantages:
●Space-saving especially for use in control cabinet
●PROFINET IO or PROFIBUS DP (depending on the interface module in use)
●Multiple modules can be used with one interface module
●Extension of existing stations by components for energy recording

Product overview
2.2 Properties of the AI Energy Meter 400VAC ST
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
14 Manual, 10/2017, A5E36061895-AB
2.2
Properties of the AI Energy Meter 400VAC ST
Article number
6ES7134-6PA01-0BD0
View of the module
①
Module type and name
⑥
LED for supply voltage
②
LED for diagnostics
⑦
Function class
③
2D matrix code
⑧
Color identification label module type
④
Wiring diagram
⑨
Function and firmware version
⑤
LEDs for channel status
⑩
Article number
Figure 2-2 View of the module AI Energy Meter 400VAC ST

Product overview
2.2 Properties of the AI Energy Meter 400VAC ST
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
Manual, 10/2017, A5E36061895-AB 15
Properties
The module has the following technical properties:
●Measurement of electrical variables from single-phase and three-phase supply networks
●Max. nominal voltage between two outer conductors 400 VAC
●Recording of:
–Voltages
–Currents
–Phase angles
–Power
–Energy / electrical work
–Frequencies
–Power factors
The module supports the following functions:
Table 2- 1 Version dependencies of the functions
Function
HW ver-
sion
FW version
STEP 7
GSD file
TIA Portal
V5.x
PROFINET IO
PROFIBUS DP
Firmware update FS01 V3.0.0 or
higher
V13 SP1 with
update 4 and HSP
or higher
V5.5 SP4 and
hotfix 7 or
higher
X ---
Identification data I&M0
to I&M3
FS01 V3.0.0 or
higher
V13 SP1 with
update 4 and HSP
or higher
V5.5 SP4 and
hotfix 7 or
higher
X X
Reconfiguration in RUN FS01 V3.0.0 or
higher
V13 SP1 with
update 4 and HSP
or higher
V5.5 SP4 and
hotfix 7 or
higher
X X
Diagnostic error inter-
rupts
FS01 V3.0.0 or
higher
V13 SP1 with
update 4 and HSP
or higher
V5.5 SP4 and
hotfix 7 or
higher
X X
Accessories
The following accessories must be ordered separately:
●BaseUnit Type D0
●Labeling strips
●Reference identification label
You can find additional information on the accessories in the ET 200SP distributed I/O
system (http://support.automation.siemens.com/WW/view/es/58649293) system manual.

Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
16 Manual, 10/2017, A5E36061895-AB
Wiring
3
3.1
Terminal and block diagram
In an ET 200SP station, the AI Energy Meter 400VAC ST forms its own potential group
together with its dark BaseUnit.
General safety instructions
WARNING
Danger to life due to electric shock
Touching live parts can lead to death or severe injuries.
Before beginning any work deenergize the system and the Energy Meter and short-circuit
installed transformers.
WARNING
Danger to life, dangerous system conditions and material damage possible
Removing and inserting the Energy Meter under live voltage is prohibited! For this reason
the symbol "Do not Hot Swap" is located on the Energy Meter.
If you remove and insert the Energy Meter under live voltage during operation, the
transformers used can produce dangerous induction voltages and electric arcs and
dangerous system conditions can arise.
The Energy Meter may only be removed and inserted during operation if the measuring
voltages supplied to the BaseUnit at terminals UL1 , UL2, UL3 are disconnected at all poles
and
special current transformer terminals are used that short-circuit the transformer on the
secondary side on removal.
CAUTION
Use only in three-phase and AC networks
Operation with direct voltage/direct current will destroy the Energy Meter.
Use the Energy Meter solely to measure electrical variables in three-phase and AC
networks.
Supplying the module
The Energy Meter is supplied through the terminals UL1 and N. The required minimum
voltage amounts to 85 VAC.

Wiring
3.1 Terminal and block diagram
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
Manual, 10/2017, A5E36061895-AB 17
Protecting the connection cables
To protect the connection cables at UL1, UL2 and UL3, make sure there is adequate cable
protection, especially after cross-section transitions.
If short-circuit resistance according to IEC 61439-1:2009 is ensured by the design, there is
no need for separate cable protection for the AI Energy Meter 400VAC ST.
Terminal and block diagram
①
Microcontroller
ULn
Voltage connection
②
Backplane bus interface
ILn
Current connection
③
Analog-to-digital converter (ADC)
N
Neutral
④
Power measurement
Figure 3-1 Block diagram of the AI Energy Meter 400VAC ST

Wiring
3.1 Terminal and block diagram
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
18 Manual, 10/2017, A5E36061895-AB
Usable BaseUnit
The ET 200SP Distributed I/O System manual explains that a potential group always starts
with a light BaseUnit. The AI Energy Meter 400VAC ST makes an exception in this case and
only uses the dark BaseUnits type D0, 6ES7193-6BP00-0B
D0
.
The BaseUnit is not in contact with the power bus and passes the potential through from the
left to the right slot.
When using some older CPUs / interface modules, note that the first permissible place for
AI Energy Meter 400VAC ST is slot 2.
Connection types
The AI Energy Meter 400VAC ST supports the following connection types:
●3P4W, 3 phases, 4 conductors
●1P2W, 1 phase, 2 conductors
The input circuit of the module must correspond to one of the listed connection types. Select
the appropriate connection type for the intended use.
You will find examples of connections in the section Connection examples (Page 19).
Information on the selection of a current transformer is available in the section Current
transformer selection data (Page 20).

Wiring
3.2 Connection examples
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
Manual, 10/2017, A5E36061895-AB 19
3.2
Connection examples
The following figures show the connection of the Energy Meter for three-phase and single-
phase measurements. Note that the Energy Meter must always be connected via a current
transformer.
Connection type
Wiring diagram
Comment
3P4W
Three-phase measurement,
4 wires
Any load
Connection with three current transformers
1P2W
Single-phase measurement,
2 conductors
Measurement in an AC network with a cur-
rent transformer
Energy Meter supplies the value "0" for all
measured values of Phases 2 and 3 as well
as for some cross-phase measured values.
If short
-circuit resistance is ensured by conformity to IEC 61439-1:2009, there is no need for separate line protection for the
AI Energy Meter 400VAC ST.
Current transformer connection requirements
DIN VDE 0100-557 and IEC 60364-5-55 require the following for the connection of current
transformers:
●The secondary circuits of current transformers must not be grounded.
●Guards must not be used in the secondary circuits of current transformers.
●Transformer secondary cable insulation must be designed for the highest voltage of all
active components, or the secondary cables must be laid in such a way that their
insulation cannot touch any active components, such as busbars.
●Connection points must be provided for temporary measurements.

Wiring
3.3 Current transformer selection data
Analog input module AI Energy Meter 400VAC ST (6ES7134-6PA01-0BD0)
20 Manual, 10/2017, A5E36061895-AB
3.3
Current transformer selection data
Introduction
Connection via a current transformer is always required for the current measurement. Use
toroids with an accuracy class of 0.5, 1 or 3.
Dimensioning of the current transformer
The correct dimensioning of the current transformer is important for the following reasons:
●You achieve correct results from the measurements and
●You do not overload or damage the current transformers.
Selecting a current transformer
Use current transformers with a burden capacity 1.5 to 2 times greater than the power
dissipation in the terminal circuit (consisting of resistance of the connection cables and
burden of the Energy Meter). 1.5 times the power loss is required in order to prevent the
transformer from overloading. 2 times the power dissipation is important to ensure the
current limiting in case of a short-circuit.
Maximum length of the connection cable
To avoid overloading or damaging the current transformer, the burden Znspecified on the
data sheet of the current transformer (in VA) must not be exceeded. To prevent this being
exceeded, the entire burden resistance (consisting of the resistance of the connection cable
and the internal resistance of the AI Energy Meter 400VAC ST (see figure below) must be
below a certain resistance value (depending on Znand Imax).
Figure 3-2 Maximum length of the connection cable