Siemens SIMATIC ET 200SP User manual

Manual
Digital output module DQ 4x24..230VAC/2A ST (6ES7132-6FD00-0BB1)
ET 200SP
02/2014Edition
Answers for industry.
SIMATIC

DQ 4x24..230VAC/2A ST
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC
ET 200SP
DQ 4x24..230VAC/2A ST
digital output module
(6ES7132-6FD00-0BB1)
Manual
02/2014
A5E32043575
-AA
Preface
Guide to documentation
1
Product overview
2
Wiring
3
Parameter
assignment/addressing
4
Interrupts/diagnostics alarms
5
Technical specifications
6
Parameter data record
A

Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E32043575-AA
Ⓟ
02/2014 Technical data subject to change
Copyright © Siemens AG 2014.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)
Manual, 02/2014, A5E32043575-AA 3
Preface
Preface
Purpose of the documentation
This device manual complements the system manual ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293). Functions that generally
relate to the system are described in this manual.
The information provided in this manual and in the system/function manuals supports you in
commissioning the system.
Conventions
Please also observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product and on the section of the documentation to which particular attention
should be paid.
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, equipment and/or networks. They are
important components in a holistic industrial security concept. With this in mind, Siemens’
products and solutions undergo continuous development. Siemens recommends strongly
that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrate each component into a holistic,
state-of-the-art industrial security concept. Third-party products that may be in use should
also be considered. You can find more information about industrial security on the Internet
(http://www.siemens.com/industrialsecurity).
To stay informed about product updates as they occur, sign up for a product-specific
newsletter. You can find more information on the Internet
(http://support.automation.siemens.com).

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)
Manual, 02/2014, A5E32043575-AA 4
Table of contents
Preface ................................................................................................................................................... 3
1 Guide to documentation .......................................................................................................................... 5
2 Product overview .................................................................................................................................... 7
2.1 Properties ...................................................................................................................................... 7
3 Wiring ..................................................................................................................................................... 9
3.1 Terminal assignment..................................................................................................................... 9
3.2 Block diagram ............................................................................................................................. 11
4 Parameter assignment/addressing........................................................................................................ 12
4.1 Parameters.................................................................................................................................. 12
4.2 Explanation of parameters .......................................................................................................... 13
4.3 Address space ............................................................................................................................ 14
5 Interrupts/diagnostics alarms................................................................................................................. 15
5.1 Status and fault displays ............................................................................................................. 15
5.2 Load voltage status ..................................................................................................................... 17
6 Technical specifications ........................................................................................................................ 18
6.1 Technical specifications .............................................................................................................. 18
A Parameter data record .......................................................................................................................... 21
A.1 Parameter assignment and structure of parameter data record................................................. 21

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)
Manual, 02/2014, A5E32043575-AA 5
Guide to documentation
1
Introduction
The documentation for the SIMATIC products has a modular structure and covers topics
relating to your automation system.
The complete documentation for the ET 200SP distributed I/O system consists of a system
manual, function manuals and product manuals.
The STEP 7 information system (online help) also helps you to configure and program your
automation system.
Overview of the documentation for digital output module DQ 4×24..230VAC/2A ST
The table below lists additional documentation that you will need when using the
DQ 4×24..230VAC/2A ST digital output module.
Table 1- 1 Documentation for digital output module DQ 4×24..230VAC/2A ST
Topic
Documentation
Key content
System description System manual ET 200SP distributed
I/O system
(http://support.automation.siemens.co
m/WW/view/en/58649293)
•Application planning
•Installation
•Wiring
•Commissioning
Designing interference-
free controllers
Function manual Designing
interference-free controllers
(http://support.automation.siemens.co
m/WW/view/en/59193566)
•Basics
•Electromagnetic compatibility
•Lightning protection
System diagnostics Function manual Diagnostics
(http://support.automation.siemens.co
m/WW/view/en/59192926)
•Overview
•Diagnostics evaluation of
hardware/software
BaseUnits Manual ET 200SP BaseUnits
(http://support.automation.siemens.co
m/WW/view/en/59753521)
Technical specifications
Amendments and special
features of the ET 200SP
I/O system
ET 200SP Product information
(http://support.automation.siemens.co
m/WW/view/en/73021864)
Current information not yet
documented in the system
manuals, function manuals, or
other manuals.

Guide to documentation
DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)
6Manual, 02/2014, A5E32043575-AA
SIMATIC manuals
All of the current manuals for SIMATIC products are available for download free of charge
from the Internet (http://www.siemens.com/simatic-tech-doku-portal).

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)
Manual, 02/2014, A5E32043575-AA 7
Product overview
2
2.1
Properties
Order number
6ES7132-6FD00-0BB1
View of the module
Figure 2-1 View of the DQ 4×24..230VAC/2A ST module

Product overview
2.1 Properties
DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)
8Manual, 02/2014, A5E32043575-AA
Properties
The module has the following technical properties:
●4 digital outputs each with a value status (quality information)
●Supply voltage L+
●Switches in zero point
●Output current 2 A per channel
●Total current 8 A (per module)
●Assignable substitute values (per channel)
●Substitute values (per channel)
●Suitable for solenoid valves, AC contactors, and indicator lights
The module supports the following functions:
●Firmware update
●Identification data I&M0 to I&M3
●Configuration in RUN
●PROFIenergy
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories must be ordered separately:
●Labeling strips
●Color identification labels
●Reference identification label
You can find additional information on the accessories in the ET 200SP Distributed I/O
System (http://support.automation.siemens.com/WW/view/en/58649293) system manual.

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)
Manual, 02/2014, A5E32043575-AA 9
Wiring
3
3.1
Terminal assignment
General pin assignment
NOTICE
Dangerous voltage. Risk of death or serious injury.
Prior to working on the system and module, always disconnect them from the power supply.
Note
Limiting overvoltage
You must ensure overvoltage is limited to 1 kV for the encoder supply.
Note
Power limitation
To limit power, each input voltage must have a fuse with a
maximum rating of 10 A tripping
current. The fuse must be a quick
-acting microfuse.