
xET 200C Distributed I/O Station
EWA 4NEB 812 6119-02b
4-12 Arrangement of Screw Terminals and DIL Switches in ET 200C;
AI 4/8 12 Bit 4-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-13 Connection to ET 200C; AI 4/8 12 Bit of Thermocouples
for Floating Measurement and External Floating Compensation 4-24. . . . .
4-14 Connection to ET 200C; AI 4/8 12 Bit of Thermocouples for
Non-Floating Measurement and External Non-Floating Compensation 4-25
4-15 Connection to ET 200C; AI 4/8 12 Bit of Thermocouples for
Non-Floating Measurement and Internal Compensation 4-26. . . . . . . . . . . .
4-16 Connection to ET 200C; AI 4/8 12 Bit of Resistance Thermometers
(Pt 100) in 2-Wire Circuit for Floating Measurement 4-27. . . . . . . . . . . . . . .
4-17 Connection to ET 200C; AI 4/8 12 Bit of Resistance Thermometers
(Pt 100) in 4-Wire Circuit for Floating Measurement 4-28. . . . . . . . . . . . . . .
4-18 Connection to ET 200C; AI 4/8 12 Bit of Voltage Sensors
in 2-Wire Circuit for Non-Floating Measurement 4-29. . . . . . . . . . . . . . . . . . .
4-19 Components of the Cable Gland for the Grounding Cable 4-30. . . . . . . . . .
4-20 Arrangement of Screw Terminals and DIL Switches in ET 200C;
AI 4 12 Bit 4-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-21 Connection to ET 200C; AI 4 12 Bit of Voltage Sensors
in 2-Wire Circuit for Floating Measurement 4-33. . . . . . . . . . . . . . . . . . . . . . .
4-22 Connection to ET 200C; AI 4 12 Bit of Current Sensors
in 2-Wire Circuit for Floating Measurement 4-34. . . . . . . . . . . . . . . . . . . . . . .
4-23 Components of the Cable Gland for the Grounding Cable 4-35. . . . . . . . . .
4-24 Arrangement of Screw Terminals and DIL Switches in ET 200C;
AO 4 12 Bit 4-37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-25 Connection of Loads to ET 200C; AO 4 12 Bit, 4-Wire Circuit
for Voltage Output 4-38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-26 Connection of Loads to ET 200C; AO 4 12 Bit, 2-Wire Circuit
for Voltage Output 4-39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-27 Connection of Loads to ET 200C; AO 4 12 Bit, 2-Wire Circuit
for Current Output 4-40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-28 DIL Switch Block in Default Position (As Delivered) 4-44. . . . . . . . . . . . . . . .
4-29 Example of How to Set a Station Number at DIL Switch
Block S1 4-45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-30 Block Diagram of DIL Switches in DIL Switch Block S2 4-47. . . . . . . . . . . . .
4-31 Block Diagram of DIL Switches in DIL Switch Block S4 4-49. . . . . . . . . . . . .
4-32 Block Diagram of DIL Switches in DIL Switch Block S5 4-51. . . . . . . . . . . . .
5-1 “CONFIGURING” Screen (1) 5-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-2 “CONFIGURING” Screen (2) 5-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-3 ”CONFIGURING” Screen (3) 5-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-4 Structure of the Parameterization Frame for ET 200C: Byte 0 5-13. . . . . . .
5-5 Structure of the Parameterization Frame for ET 200C: Byte 1 5-13. . . . . . .
6-1 Connecting the Programmer to the ET 200C 6-2. . . . . . . . . . . . . . . . . . . . . .
6-2 Connecting the Programmer to the SINEC L2-DP Field Bus 6-3. . . . . . . .
6-3 “SYSTEM START-UP/TEST: STATION SELECTED” Screen 6-5. . . . . . . .
6-4 ”SYSTEM START-UP/TEST: STATUS/CONTROL” Screen 6-7. . . . . . . . . .
7-1 ”INDIVIDUAL DIAGNOSTICS” Screen 7-6. . . . . . . . . . . . . . . . . . . . . . . . . . .
7-2 Structure of the Diagnostics Word after Requesting the
Diagnostics ”Overview” 7-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-3 Structure of the Diagnostics Word after Requesting the
Diagnostics for ”Parameter Assignment and Addressability” 7-13. . . . . . . .
7-4 Structure of the Diagnostics Word after Requesting the Station
Status (Station Status 1 and Station Status 2) 7-15. . . . . . . . . . . . . . . . . . . .
Contents