
ix
ET 200U Distributed I/O Station
EWA 4NEB 812 6087–02b
4.2.3 Using the SYSTEM START–UP/TEST Screen for an ET 200U(DP Siemens)
Slave Station 4-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STATUS/FORCE Function 4-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STATUS Function 4-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FORCE Function 4-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FORCE with Load Circuit 4-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3 Diagnosing Faults for ET 200U(DP Siemens) 4-25. . . . . . . . . . . . . . . . . . . . . . . .
In this Section 4-25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.1 Using LEDs to Diagnose Problems 4-26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.2 Using COM ET 200 to Diagnose Problems 4-27. . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.3 Diagnosing Faults with STEP 5 (Station Diagnostics) 4-29. . . . . . . . . . . . . . . . .
General Remarks on Diagnostics 4-29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Special Features of Requesting Diagnostics Using Page Addressing 4-29. . .
Structure and Request of Station Diagnostics for ET 200U 4-30. . . . . . . . . . . .
Request Station Status 4-31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Read Station Status 4-31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Request Manufacturer Identification 4-33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Request Station Diagnostics 4-34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Read Station Diagnostics 4-34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Request Module Diagnostics 4-35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Read Module Diagnostics 4-35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 ET 200U(DP Standard): Address Assignment, Starting UP and Diagnosing Faults
Using COM ET 200 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Prerequisites for this Chapter 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
In this Chapter 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For Reference 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What is DP Standard? 5-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Requirements for Operation 5-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1 Assigning Addresses Using COM ET 200 5-3. . . . . . . . . . . . . . . . . . . . . . . . . . .
In this Section 5-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Copying the Type File 5–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1.1 Using the CONFIGURING Screen for ET 200U(DP Standard) 5-4. . . . . . . . .
“Station Number” 5-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
“Area” 5-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
“Station Type” 5-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
“Next Available Address” 5-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Special Address Assignment Conditions 5-7. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Condition 1 5-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Condition 2 5-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Example Division of the Digital/Analog I/O Areas 5-8. . . . . . . . . . . . . . . . . . . . .
Configuring 5-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DP Standard Address ID 5-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Help for Input of Unknown Address IDs 5-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Defining Parameters 5-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finish Configuration 5-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1.2 How to Proceed if the Configuration is Modified at a Later Point 5-18. . . . . . . .
Expanding the Slave Station at a Later Point 5-18. . . . . . . . . . . . . . . . . . . . . . . .
Expanding an Already Configured Slave Station 5-18. . . . . . . . . . . . . . . . . . . . .
Contents