Sigmann DELTA SD160ex User manual

Sigmann DELTA GmbH Tel. [phone] Handelsregister Volksbank Kraichgau
Hauptstraße 53 Fax [phone] Mannheim HRB 703603 BLZ 672 922 00 Konto 55258007
D-74928 Hüffenhardt [e-mail] Geschäftsführer S.W.I.F.T.-Code GENO DE 61SSH
UstIDNr: DE257944309 http://www.sigmann-delta.de Joachim Kraus IBAN DE31 6729 2200 0055 2580 07
Date: 03.12.2015
Operating Instructions
Wired handheld scanner
SD160ex Type SD.112.0000.0X
SD260ex Type SD.115.0000.00

SD160ex_BA_en_004

SD160ex_BA_en_004
Table of contents
1 Product range wired handheld scanner Zone 1 2
2 Scanner overview 3
3 Important Notes on Operating Instructions 4
3.1. Safety Information ................................................................................................ 4
3.2 Notes on Operating Instructions ................................................................................................ 5
3.3 General Notes of Caution ................................................................................................ 6
4 Product Information - SD160ex 8
4.1 Explosion Protection ................................................................................................................... 8
4.2 Technical Data ................................................................................................................... 8
4.3 Type Numbers ................................................................................................................. 10
4.4 Serial numbers ................................................................................................................. 10
4.5 Application ................................................................................................................. 10
5 System Assembly - 1D Sanner 11
5.1 Discritpion ............................................................................................. 11
6 Product Information - SD260ex 12
6.1 Explosion Protection ................................................................................................................... 12
6.2 Technical Data ................................................................................................................... 12
6.3 Type Numbers ................................................................................................................... 14
6.4 Serial numbers ................................................................................................................... 14
6.5 Application ................................................................................................................... 14
7 System Assembly - 2D Scanner 15
7.1 Discritpion ............................................................................................. 15
8 Cable range in System Assembly for 1D and 2D Scanner 16

SD160ex_BA_en_004
9 Step-by-step Guide on Installation and Operation 17
9.1 Connection Handheld Scanner SD160ex / SD260ex .............................................. 17
9.2 Connection power supply SDVM125ex RS232 .............................................. 18
9.3 Direct Connection SD160ex / SD260ex to SDVM125ex RS232 .............................................. 19
9.4 Connection power supply SDVM125ex USB .............................................. 20
9.5 Direct Connection SD160ex to SDVM125ex USB .............................................. 21
10 Attachment 22
10.1 Certificate Wired Handheld Scanner SD160ex / SD260ex ...................................................... 22
10.2 Certificate of Conformity Scanner SD160ex / SD260ex ...................................................... 26
10.3 Certificate power supply SDVM125ex ...................................................... 29
10.4 Certificate of Conformity power supply SDVM125ex ...................................................... 35
11 Contact 42

SD160ex_BA_en_004 2
1 Product range wired handheld scanner Zone 1

SD160ex_BA_en_004 3
2 Scanner overview
Wired
Bluetooth
1D
PDF
2D
SD160ex





SD160exPDF





SD260ex





SD160BTex





SD160BTex PDF





SD161BTex





SD161BTex PDF





SD261BTex






SD160ex_BA_en_004 4
3Important Notes on Operation Instructions
3.1 Safety information
Warnings are highlighted by a special symbol and a different font colour:
Danger
Non-compliance may result in life-threatening situations.
This warning must be heeded.
Warning
This type of warning concerns dangerous situations that may result in minor injuries.
Info
Important and helpful notes and information.

SD160ex_BA_en_004 5
3.2 Notes on the Operating Instructions
Before starting up the equipment please read the manual thoroughly.
The Operating Instructions contain important information on functionality as well as safety rules. If these
are not heeded, normal operations within hazardous areas cannot be guaranteed.
The notes contained in this manual are important for starting up and operating the product.
These instructions may be updated at any time. Sigmann DELTA GmbH reserves the right to make changes to
this document.
Before using the product, users must ensure that they have the most up-to-date version of the operating instruc-
tions. To be sure this is the case, please check Sigmann DELTA's website at www.Sigmann-DELTA.de or contact
one of the company's staff.
The drawings contained in these operating instructions are for illustration purposes only and may differ somewhat
from the actual design.
No changes may be made to the device that were not intended or approved
by Sigmann DELTA.
If the handheld scanner is not used properly, the operating permission for hazardous areas may lapes for the
device in question.
Non-adherence to the instructions will void any warranty.
For further information on the commission of the SD160ex handheld scanner you may also wish to
refer to the manual issued by SICK AG (www.SICK.com).

SD160ex_BA_en_004 6
3.3 General Notes of Caution
Caution / Notes
The devices may only be operated when fully assembled.
In hazardous areas the devices must not be wiped or cleaned with a dry cloth!
The device must be switched off immediately if it is likely that as a consequence
of damaging impact or general peculiarities the device can no longer be safely
operated. (e.g. ingress of water or other fluids, temperatures outside of the
specified range,...)
General statutory requirements or health and safety rules and accident preven-
tion guidelines and environmental laws must be adhered to (e.g. the German
Occupational Health and Safety regulation).
Users must not open the device.
Users must not make any changes to the device. Components may not be ex-
changed or replaced. If non-specified components are used, explosion protec-
tion is no longer guaranteed.
Ensure safe handling with firm footing and sufficient room for movement.
If the enclosure is in any way damaged the device must be removed from the
hazardous area immediately.
In accordance with IEC 60079-19 and IEC 60079-17, operators of electrical
installation in hazardous areas are obliged to have them serviced by qualified
electricians.
Do not insert any sharp objects into the enclosure or any other openings of the
handheld barcode scanner. Any openings at the device must not be covered or
blocked.
The device and any accessories must be properly disposed of, i.e. as legally
specified, for example by a certified company.
Notes on installation
Electrical plants are subject to certain regulations concerning installation and
operation (e.g. RL 99/92/EG, RL 94/9EG, or the national rules such as IEC 60
079-14 and VDE 0100).
In the hazardous area it is the operator's responsibility to carry out any repair
and maintenance in compliance with applicable rules.

SD160ex_BA_en_004 7
Caution
on laser devices
Devices fitted with laser fall under standards US 21 CFR 1040.10 and EN
60825-1. The laser's classification is stated on a plate affixed to the device.
Class 1 lasers are deemed inherently safe during normal use, but users must
not look directly into the light source. The following declaration is required by
American and international laws:
Usage of control elements, adaptations or the use of procedures that differ from
these instructions may result in a dangerous exposure to laser beams.
Class 2 lasers use a visible low-voltage LED. As with any source of bright light,
such as the sun, the user should avoid looking directly into the light. Brief expo-
sure to a class 2 laser is deemed not dangerous.
Maintenance
Provided the device is operated and assembled according to instructions and
the ambient requirements are being met continuous maintenance is not neces-
sary.
Servicing
Operators of electric equipment in hazardous areas are obliged to have them
serviced by qualified electricians (IEC 60079-19 and IEC 60079-17).
Repairs
Repairs may only be carried out by the manufacturer or by persons trained and
commissioned for this purpose by the manufacturer.
The device is closed ex-factory. It may only be opened in the factory by specifically trained personnel.
Software installation
For instructions on how to install the software at the PC please refer to the
manual issued by SICK Vertriebs-GmbH in Düsseldorf.
Operation
Before operating the device you must ensure that all necessary components are
available.

SD160ex_BA_en_004 8
4Product Information - SD160ex Type SD.112.0000.0X
SD160ex 1D Standard Scanner
4.1 Explosion
protection
II 2G Ex ib IIC T4
II 2G Ex ib IIC T4 Gb
II 2D Ex ib IIIC T135C
II 2D Ex ib IIIC T135C Db
Certification
IBExU 12 ATEX 1120
IECEx IBE 15.0016
Manufacturer
Sigmann DELTA GmbH
Hauptstraße 53
74928 Hüffenhardt
Germany
4.2 Technical Data
Type SD.112.0000.0X - RS232 5,6V (with connection cable SD.Z10.0007.XX)
maximum input voltage Ui= 5,6 V
maximum input current Ii= 480 mA
maximum input power Pi= 1,25 W
maximum internal inductance Li= negligible
maximum internal capacitance Ci= 46 µF
Note: The input voltage in to the handheld scanner itself
is reduced by the associated connection cable
SDZ10.0007.XX from 5.6V to 4.9V.
Typ SD.112.0000.0X - RS232 4,9V (with connection cable SD.Z10.0008.XX)
maximum input voltage U=: 4,9 V
maximum input current Ii= 480 mA
maximum input power Pi= 1,25 W
maximum internal inductance Li= negligible
maximum internal capacitance Ci= 112,4 µF

SD160ex_BA_en_004 9
Typ SD.112.0000.0X - USB (with connection cable SD.Z10.0009.XX)
maximum input voltage Ui= 4,9 V
maximum input current Ii= 480 mA
maximum input power Pi= 1,25 W
maximum internal inductance Li= negligible
maximum internal capacitance Ci= 112,4 µF
Technical data
(Scan engine)
Light source: Visible red light, 630nm
LED safety: LED classification acc. to DIN EN 60825-1
Scan rate: 500 scans per second
Reader distance: 50mm to 800 mm (0,5mm)
Dimensions
104 x 76 x 185 mm (length x width x height)
Ambient temperature
-20°C to +50°C
Storage temperature
-30°C to +70°C
Weight
ca. 200 g (without connection cable)
Nominal data
Operating voltage U = 5,6V / 4,9V
Protection category
IP65
Optional interfaces
RS-232 TTL / USB
Terminal assignment
(handheld scanner)
USB-cable
USB/D+ green
USB/D- white
GND black
+UB brown
RS 232-cable
RS 232-TXD white
GND brown
+UB yellow
Use the device only with connection cable SD.Z10.0007.XX, SD.Z10.0008.XX, SD.Z10.0009.XX.

SD160ex_BA_en_004 10
4.3 Typenumbers - 1D Scanner SD160ex
SD.112.0000.00
Standard 1D
RS232/RS422-5,6V-Version, used with connection cable SD.Z10.0007.XX
and only for connection to 5.6V power supply SD.211.X001.XX
SD.112.0000.00
Standard 1D
RS232/RS422-4,9V-Version, used with connection cable SD.Z10.0008.XX
and only for connection to power supply SD.211.X011.XX.
SD.112.0000.00
Standard 1D
USB-Version, used with connection cable SD.Z10.0009.XX
and only for connection to power supply SD.211.X111.XX.
SD.112.0000.01
Standard 1D, Stacked PDF
RS232/RS422-5,6V-Version, used with connection cable SD.Z10.0007.XX
and only for connection to 5,6V power supply SD.211.X001.XX
SD.112.0000.01
Standard 1D, Stacked PDF
RS232/RS422-4,9V-Version, used with connection cable SD.Z10.0008.XX
and only for connection to power supply SD.211.X011.XX.
SD.112.0000.01
Standard 1D, Stacked PDF
USB-Version, used with connection cable SD.Z10.0009.XX
and only for connection to power supply SD.211.X111.XX.
4.4 Serial numbers
Serial key: year of manufactur serial number
2 numbers 4 numbers
Example: 130001
4.5 Application
The scanner is a handheld device.
Its purpose is portable capture and direct transfer of data in hazardous areas. The device has been designed for
use in hazardous areas zones 1 and 21.

SD160ex_BA_en_004 11
5System Assembly - 1D Scanner SD160ex
Overview of the complete
system assembly,
wire handheld scanner
SD160ex
5.1 Description:
The wired handheld scanner SD160ex (SD.112.0000.0X) was designed for use in hazardous areas. Normal opera-
tion requires an power supply SDVM125ex (SD.211.XX11.00) a connection cable between power supply and
scanner (SD.Z10.000X.XX) and a connection cable between power supply and a PC.
External connection cable:
Data cable USB: 0,2 - 2,5 mm2, 4-wire or RS232: 0,2 - 2,5 mm23-wire
Power supply cable 0,2 - 2,5 mm23-wire
The Bluetooth handheld scanner, the base charging station and the power supply can be connected and operated
in the hazardous area. The current rating of the connection cables must be checked before use.
For the professional use of the power supply SDVM125ex the operating instructions of the manual
of the power supply are necessary.
For the professional use of the power supply SDVM125ex the operating instructions of the
manual of the power supply are necessary!

SD160ex_BA_en_004 12
6Product Information - SD260ex Type SD.115.0000.00
SD260ex 2D Scanner
6.1 Explosion
protection
II 2G Ex ib IIB T4
II 2G Ex ib IIB T4 Gb
II 2D Ex ib IIIC T135C
II 2D Ex ib IIIC T135C Db
Certification
IBExU 12 ATEX 1120
IECEx IBE 15.0016
Manufacturer
Sigmann DELTA GmbH
Hauptstraße 53
74928 Hüffenhardt
Germany
6.2 Technical data
Typ SD.115.0000.00 - RS232 4,9V (connection cable SD.Z10.0008.XX)
maximum input voltage Ui= 4,9 V
maximum input current Ii= 750 mA
maximum input power Pi= 2 W
maximum internal inductance Li= negligible
maximum internal capacitance Ci = 202 µF

SD160ex_BA_en_004 13
Technical data
(Scan engine)
Light source: Lighting-LEDs: Visible red light, 630nm
Laser: Visible red light 630nm
LED safety: LED classification acc. to IEC62471
Laser safety Laser classification acc. to IEC60825-1 Class 1
Scan rate: 60 scans per second
Reader distance: 35mm to 90 mm (0,13mm)
Dimensions
104 x 76 x 185 mm (length x width x height)
Ambient temperature
-20°C to +50°C
Storage temperature
-40°C to +70°C
Weight
ca. 200 g (without connection cable)
Nominal data
Operating voltage U = 4,9V
Protection category
IP65
Optional interfaces
RS-232 TTL / USB
Terminal assignment
(handheld scanner)
RS 232-Cable
RS 232-TXD white
GND brown
+UB yellow
Use the device only with connection cable: SD.Z10.0008.XX, SD.Z10.0009.XX.
Use the device in hazardous area only with power supply: SD.211.XX21.XX.

SD160ex_BA_en_004 14
6.3 Type numbers - 2D Scanner SD260ex
SD.115.0000.00
Standard 1D, Stacked PDF, 2D
RS232/RS422-5,6V-Version,
used with connection cable SD.Z10.000X.XX
6.4 Serial numbers
Serial key: year of manufactur serial number
2 numbers 4 numbers
Example: 130001
6.5 Application
The scanner is a handheld device.
Its purpose is portable capture and direct transfer of data in hazardous areas. The device has been designed for
use in hazardous areas zones 1 and 21.

SD160ex_BA_en_004 15
7System Assembly - 2D Scanner SD260ex
Overview of the complete
system assembly,
wire handheld scanner
SD260ex
7.1 Description:
The wired handheld scanner SD260ex (SD.115.0000.00) was designed for use in hazardous areas. Normal opera-
tion requires an power supply SDVM125ex (SD.211.XX21.00), a connection cable between power supply and
scanner (SD.Z10.000X.XX) and a connection cable between power supply and a PC.
External connection cable:
Data cable USB: 0,2 - 2,5 mm2, 4-wire or RS232: 0,2 - 2,5 mm23-wire
Power supply cable 0,2 - 2,5 mm23-wire
The Bluetooth handheld scanner, the base charging station and the power supply can be connected and operated
in the hazardous area. The current rating of the connection cables must be checked before use.
For the professional use of the power supply SDVM125ex the operating instructions of the manual
of the power supply are necessary.
The warnings and notes of caution contained in these operating instructions and in the manal
issued by SICK AG (www.SICK.com) must be adhered to!

SD160ex_BA_en_004 16
8 Cable range in System Assembly with SD160ex and SD260ex
RS232
SD160ex
SD260ex
1,8m or 3,8m
or optional with
4,5m or 6m
extension
SD125ex
Up to 20m
Host
USB
SD160ex
1,8m or 3,8m
SD125ex
Up to 5m
Host

SD160ex_BA_en_004 17
9Step-by-step guide on installation and operation
9.1 General connection of handheld scanner SD160ex and SD260ex
Insert the RJ45 plug of the cable (SD.Z10.0008.XX,
SD.Z10.0009.XX) at the bottom of the scanner to connect the
handheld scanner with the power supply.
Make sure the plug has engaged fully.
Cable (SD.Z10.0008.XX RS232 / SD.Z10.0009.XX USB) connected
to the handheld scanner SD160ex (SD.112.0000.0X)
or. cable (SD.Z10.0008.XX RS232) connected to the handheld scan-
ner 2D Scanner SD260ex (SD.115.0000.00)
Insert the plug of the connection cable into the power supply’s plug
connector.
Ensure that the connection is fully secured with the
screw cap after the plug has been inserted.