Signature Hardware Ryle User manual

1Ryle Freestanding Tub Faucet Installation Instructions
RYLE FREESTANDING TUB FAUCET
INSTALLATION INSTRUCTIONS
Installation on a concrete slab is not recommended. Observe
all local plumbing and building codes.
Unpack and inspect faucet and parts for damage. If any
damage is found, contact Customer Service at
1-866-855-2284 If you need assistance while installing your
new faucet, call our Customer Service number.
We recommend consulting a professional if you are
unfamiliar with installing bathroom xtures and plumbing.
Signature Hardware accepts no liability for any damage to the
oor, walls, plumbing, or personal injury during installation.
1. Install the rough-in valve SD1500 beneath the nished
oor with the provided M0808051 hardware.
2. Test the water pressure to ensure there is no leakage
before continuing installation. We recommend consulting
a plumbing professional if you are unfamiliar with water
pressure testing.
Water
Water
3. Connect the water supplies to the valve.
Cold
Hot
4. After the nished oor material is installed, trim away
the excess rough-in valve material.
Level
5. Assemble the faucet as specied in the above drawing.
6. Remove the cap from the rough-in valve and install the
faucet.

2Ryle Freestanding Tub Faucet Installation Instructions
EXPLODED DRAWING: