Signature Hardware COPPER FARMHOUSE SINK User manual

1
COPPER FARMHOUSE SINK
WITH VINE DESIGN
SKU: 915858, 926763, 926765, 926764, 909167, 908073, 937090
REVISED 05/21/2020
CODES: 235071, 394967, 235076, 521885
235066, 521886, 521887, 394968, 521877
521880, 421036, 521878, 421033, 421032
521879, 521881, 476578, 506954, 506951
292232, 506950, 506922, 507125
For Warranty information, please visit: signaturehardware.com/services/warranty
INSTRUCTIONS
Unpack and inspect the sink for any shipping damages
and ensure that none of the required pieces are

Contact Customer Service at 1-866-855-2284. If you
need assistance while installing your new farmhouse
sink, call our Customer Service number.
Due to the manufacturing process, each sink will vary
slightly dimensionally. Farmhouse sinks may require
custom cabinetry. We recommend consulting an
experienced cabinet maker for assistance. Providing
the cabinet maker with the actual sink to be installed

Please use assistance when lifting the sink in order to
avoid personal injury.
We recommend consulting a professional if you are

Signature Hardware accepts no liability for any damag-

installation.
TOOLS AND MATERIALS:
Pencil
Read the following installation below. Observe
all local plumbing and building codes.
BEFORE INSTALLING
Thread Sealant
Tape Measure
Safety Glasses Framing Square
Level Hacksaw
Wood Shims
Drill
Basin Wrench
**Sealant - We recommend the use of
neutral cure silicone caulk or a general
purpose silicone sealant.

2
COPPER FARMHOUSE SINK
WITH VINE DESIGN
SKU: 915858, 926763, 926765, 926764, 909167, 908073, 937090
We recommend undermount sink installation.
Flush-mount and built-up installation are not recom-
mended.
Ensure there is adequate room for the faucet and
backsplash installations.
INSTALLATION OPTIONS
Apply a bead of silicone sealant to the base of the

opening in the sink.

supplied with the garbage disposer to attach the
disposer and complete your installation. For drains with
strainer baskets, slide the rubber gasket and friction

sink.
Thread the lock nut onto the drain assembly.
Hand-tighten and make sure that the drain is properly

wrench to secure the drain. Secure the P-trap to the

ferrule.
DRAIN INSTALLATION

3
COPPER FARMHOUSE SINK
WITH VINE DESIGN
SKU: 915858, 926763, 926765, 926764, 909167, 908073, 937090
TEMPLATE AND CUTOUT
Farmhouse sinks may require custom cabinetry. We
recommend consulting an experienced cabinet
maker for assistance. Providing the cabinet maker
with the actual sink that is to be installed will ensure a

Allow clearance for the water supply lines, drains and
a garbage disposal, if applicable. Build a support
frame or install support bars from front
to back along the inner sides of the cabinet. The
frame must support the weight of the sink and
all attachments.
The support frame should be positioned so that
when installed, the sink is in line and level with the top
of the cabinet.
No template is provided since each sink will vary
dimensionally. After centering the sink, trace the
outline of the sink on the counter-top with a pencil to
use as a guide for the cutout. Remember to allow
clearance for any faucets and/or backsplashes. Cut
the counter-top accordingly.
FINAL PLACEMENT

previous steps. The entire weight of the sink should
be supported by the support frame. Verify that the
sink is in line and level with the top of the cabinet. Use
shims, if needed, to level the sink.

below the sink front, and between the sink and
counter-top. Hold the sink in place to secure. Place
the counter-top onto the sink and remove any excess
sealant from all surfaces.
PREPARE THE CABINET

4
COPPER FARMHOUSE SINK
WITH VINE DESIGN
SKU: 915858, 926763, 926765, 926764, 909167, 908073, 937090
CLEANING AND MAINTENANCE


depending upon usage.


use any abrasive cleaning pads or materials. Rinse with warm water and dry with a clean, soft cloth.


Epsom, or bath salts, should not be used in copper tubs, as they will tarnish and corrode the copper's appearance.
HOW COPPER AGES

natural elements, such as water and air. When your copper begins its patina process depends on where, how, and how often



that it will never rust or corrode. The look of the copper will change over time; however, its rigidity will stay intact.