Silvercrest SIKP 2000 D1 Instruction sheet

English........................................................................................................................ 2
Ελληνικά .................................................................................................................. 23
Deutsch..................................................................................................................... 47
V 1.2

SilverCrest SIKP 2000 D1
2 - English
Contents
Introduction................................................................................................................ 3
Intended use............................................................................................................... 3
Package contents ....................................................................................................... 5
Controls and displays ................................................................................................. 5
Technical specifications ............................................................................................... 6
Safety instructions ...................................................................................................... 7
Before you start ....................................................................................................... 14
Introduction to induction cooking................................................................................................................14
Suitable cookware .......................................................................................................................................14
Getting started ......................................................................................................... 15
Setup and connection ..................................................................................................................................15
Use ................................................................................................................................................................15
Switching off using the timer........................................................................................................................17
Child lock......................................................................................................................................................17
Maintenance / cleaning ............................................................................................ 18
Troubleshooting ....................................................................................................... 19
Environmental regulations and disposal information ............................................... 20
Conformity ............................................................................................................... 20
Guarantee information............................................................................................. 21


SilverCrest SIKP 2000 D1
English - 3
Introduction
Thank you for buying a SilverCrest product.
The SIKP 2000 D1 induction hotplate can be used for preparing and cooking food and keeping it warm
in suitable pans. It is portable and easy to operate thanks to the touch-sensitive control panel.
Intended use
This induction hotplate is not intended for commercial use. This induction hotplate is suitable exclusively for
use indoors, in dry, sealed spaces. Always make sure that the induction hotplate is on a stable surface.
The device fulfils all relevant norms and standards relating to CE conformity. Any modifications to the
device other than recommended changes by the manufacturer may result in these standards no longer
being met.

SilverCrest SIKP 2000 D1
4 - English
Information on domestic electrical hobs
Symbol Value
Model code xSIKP 2000 D1
Hob type xElectric
Number of burners and cooking surfaces x1
Heating technology (induction burners and cooking
surfaces, radiation burners, hotplates) xInduction
For circular cooking surfaces and hotplates:
Diameter of usable area for each electrically heated
cooking surface, accurate to 5 mm.
Ø26 cm
For non-circular cooking surfaces and hotplates: Length
and width of usable surface for each electrically
heated cooking surface and each electrically heated
hotplate, accurate to 5 mm.
L
Wx
Energy consumption for each cooking surface, per kg EC electric cooking 145 Wh/kg
Electricity consumption of hob per kg EC electric hob 145 Wh/kg

In
f
On
ad
a
in t
h
the
an
d
P
r
T
h
ti
m
P
a
C
o
Th
e
sh
o
ormation on
ly use the induc
t
a
pte
r
plates con
h
e pan relative
t
heat transfer b
e
d
energy is wast
e
r
edictab
l
h
e inductio
m
er or a s
e
Risk
Do n
o
on th
burn
y
a
ckage con
SilverCr
e
This use
r
o
ntrols and
e
se operating in
o
wn with figures
1 Pow
e
2 Heat
i
3 Sym
b
4 Sym
b
5 Sym
b
6 Sym
b
7 Displ
8 Sens
o
9 Sens
o
reducing en
v
tion hotplate wi
t
siderably reduc
t
o the energy u
s
e
tween the ada
p
ed.
l
e misus
e
n hotplat
e
e
parate re
m
of burn
s
o
t place o
t
e hotplat
e
y
ourself.
n
tents
e
st SIKP 2000
D
r
manual
displays
structions have
indicated. The
m
e
r cable
ing zone
b
ol for child loc
k
b
ol for time
r
b
ol for power di
s
b
ol for temperat
u
ay
o
r button for chi
o
r button for tim
v
ironmental i
m
t
h induction-co
m
e the energy ef
f
s
ed) and invalid
p
ter plate and t
h
e
e
is not de
m
ote contr
o
s
!
t
her items
e
. These
c
D
1 induction hot
p
a fold-out cove
m
eanings of the
k
s
play (Watt)
u
re display
ld lock
er
m
pact:
m
pliant pans. N
e
f
iciency of an in
a
te all the bene
h
e base of the p
s
igned to
o
l system.
(e.g. cutle
r
c
ould get
v
p
late
r. On the insid
e
n
umbers are as
S
i
e
ver use 'inducti
o
duction hotplat
e
e
fits of a hob of
t
an. This means
t
be used
w
r
y, utensils
v
ery hot
a
e
of the cover,
t
follows:
lverCrest SIKP
2
E
n
o
n adapter plat
e
e
(available tem
t
his kind. This is
t
he process tak
e
w
ith an ex
t
, pan lids,
a
nd you
c
t
he induction h
o
2
000 D1
n
glish - 5
e
s', these
perature
down to
e
s longer
t
ernal
etc.)
c
ould
o
tplate is

Sil
v
6 -
Te
M
a
M
o
O
p
Po
w
Dis
p
Tim
Co
n
Po
w
Di
m
W
e
M
a
Pro
v
erCrest SIKP 2
0
English
10 On/
O
11 Rota
r
12 Func
t
chnical sp
e
a
nufacture
r
o
del name:
p
erating voltage:
w
er:
p
lay:
er:
n
trol panel:
w
er cord length:
m
ensions:
e
ight:
a
x pan diameter
:
tection Class II
0
00 D1
O
ff button
r
y controller (–
L
t
ion button (
s
e
cifications
:
L
evel down / +
L
s
witch between
SilverCr
e
SIKP 20
0
220 - 24
max. 20
0
10 pow
e
1600, 1
8
Corresp
o
160, 18
0
4 digits
w
3 hour c
o
touch-se
n
2.00 m
approx.
3
approx.
2
26 cm
L
evel up)
power/temper
a
s
t
0
0 D1
0 V, 50/60 Hz
0
0 W
e
r levels: 200,
8
00, 2000 Wa
t
o
nd to 10 temp
e
0
, 200, 220, 2
4
w
ith LED lighting
o
untdown in 1
m
n
sitive sensor bu
t
3
4 cm x 29.5 c
m
2
,690 g
a
ture display)
400, 600, 80
0
t
t
e
rature levels:
6
4
0 °C
m
inute increment
t
tons and rotary
m
x 7.4 cm (
W
x
0
, 1000, 120
0
6
0, 80, 100, 1
2
s
controller, child
x
D x H)
0
, 1400,
2
0, 140,
lock

SilverCrest SIKP 2000 D1
English - 7
Safety instructions
Before you use this device for the first time, please carefully read the
following instructions and heed all warnings, even if you are familiar
with handling electronic devices. Keep these operating instructions
in a safe place for future reference. If you sell the device or give it
away, pass on the user manual at the same time. It forms part of the
product.
Explanation of symbols
In this user manual, warnings are used as follows. Some of these
symbols are affixed to the product itself in order to alert the user to
potential risks.
Risk of burns!
This symbol warns of hot surfaces.
Do not touch!
This warning warns against touching the surface of the
hotplate.
WARNING!
This symbol denotes important information for the safe
operation of the product and user safety. It warns against
risks which could, if left unheeded, cause danger to life and
limb, injuries or material damage.

SilverCrest SIKP 2000 D1
8 - English
Risk of electric shock!
This symbol warns of risks which could, if left unheeded,
cause damage to life and limb through electric shock.
Risk of fire!
This symbol warns that fires could start if the warning is left
unheeded.
This symbol denotes further information on the topic.
Children and people with disabilities
This device may be used by children older than 8 years as well as
by persons with reduced physical, sensory or mental capacities or
those persons who have lack of knowledge or experience, as long
as they are supervised or they have received instructions regarding
the proper use of the appliance and they understand the associated
risks. Do not allow children to play with the appliance. Any cleaning
or maintenance of the product must not be performed by children
unless they are supervised.
Children under the age of 8 must be kept away from the device and
the power cord.
WARNING of suffocation!
Packaging material is not a toy. Do not allow children to
play with plastic bags. There is a risk of suffocation.

SilverCrest SIKP 2000 D1
English - 9
WARNING of falling objects!
Make sure that children cannot pull the device from the
work-surface by the power cord. There is a danger of injury.
Keep the device out of the reach of children.
General safety instructions
Risk of burns!

Do not place other items (e.g. cutlery, utensils, pan lids,
etc.) on the hotplate. These could get very hot and you
could burn yourself.
 Do not touch the heating surface a cooking vessel has
previously been standing on. After the cooking vessel is
removed, the heating surface can still be very hot.
Risk of fire!

Oil and fat can catch fire if over-heated. Therefore, be
careful when heating oil and fat. Never leave hot oil or
fat unattended.
 Risk of explosion! Never attempt to extinguish
burning oil or fat with water. Instead, smother it by
covering the cooking pan with a well-fitting lid or plate.
Unplug the mains plug from the wall socket.
 Do not place the device on textile surfaces such as a
tablecloth.
 Do not place the device on metal surfaces. These can
heat up quickly and cause a fire.

SilverCrest SIKP 2000 D1
10 - English
 Never place the device under flammable items such as
curtains.
 The openings on the bottom of the product must never be
covered. Keep a distance of at least 10 cm clear all
around the device and at least 60 cm clear above it to
guarantee sufficient cooling.
Risk of electric shock!

The induction hotplate housing and power cable must
not be damaged in any way. Never replace a damaged
cable, instead contact customer services (see "Guarantee
information" on page 21), If the housing or the power
cord is damaged, there is a risk of electric shock.
 Never open the housing of the induction hotplate as there
are no components inside which require maintenance. If
the housing is opened, there is a risk of electric shock.
 If you notice any smoke, unusual noises or strange
smells, switch off the device immediately and remove the
plug from the wall socket. If this occurs, do not continue
to use the device and have it checked out by an expert.
Never inhale smoke from a possible device fire. If you do
inadvertently inhale smoke, seek medical attention.
Smoke inhalation can be damaging to your health.
 Make sure that the power cord cannot be damaged by
sharp edges or hot spots. Never wrap the power cord
around the hotplate.

SilverCrest SIKP 2000 D1
English - 11
 Make sure that the power cord cannot get crushed or
squashed.
 Even when switched off, the induction hotplate is not
entirely disconnected from the wall outlet. In order to
disconnect it from the mains completely, unplug the
mains plug from the wall outlet.
 When disconnecting the power supply, always pull on
the plug and never on the cable itself.
 Always remove the plug from the outlet if you have any
problems, if you are not using the device, before
cleaning and during thunderstorms.
 If you notice visible damage to the induction hotplate or
the power cord, switch the device off, disconnect the
mains plug from the wall outlet and contact customer
services (see "Guarantee information" on page 21).
 Only connect the induction hotplate to a properly
installed, easily accessible wall outlet whose mains
voltage corresponds to that on the rating plate. After
connecting the device, the wall outlet must still be easily
accessible so that you can remove the mains plug quickly
in the event of an emergency.
 Never immerse the induction hotplate, the power cord or
the mains plug in water or other liquids. If liquid does
penetrate into the product, disconnect the mains plug
from the wall outlet immediately and contact customer

Sil
v
12
v
erCrest SIKP 2
0
- English
s
e
 If
t
s
w
o
u
Dan
g
Med
i
influ
e
Mai
n
man
u
Da
m
Kee
p
w
hic
h
mag
n
War

Do
o
v

M
e
x
b
r
T
h
 B
e
o
f
e
x
0
00 D1
e
rvices (se
e
the glass
p
w
itch the
de
u
tlet in or
de
g
er fro
m
i
cal devic
e
e
nced a
nd
n
tain a sa
fe
u
facturer.
m
age cau
p
the indu
ct
h
could
b
n
etic stora
g
ning ab
o
Do
not hea
t
v
erheat a
nd
M
ake sure
th
x
cessive v
ib
r
eak. Be c
a
h
ere is a ri
s
e
careful
w
f
the cook
in
x
ceed 10
k
e
"Guaran
t
p
late on t
he
de
vice off
a
de
r to avoi
d
m
electro
m
e
s (pace
m
nd
dama
g
fe
ty distan
c
sed by
e
ct
ion hotpl
a
b
e affecte
d
g
e media,
e
o
ut prop
e
t
empty co
o
nd
damag
e
th
at the in
d
ib
ration, a
s
a
reful not
to
s
k of injur
y
w
hen prep
a
in
g vessel
a
k
g.
t
ee inform
a
he
hotplate
a
nd discon
n
d
a possi
bl
m
agneti
c
m
akers, he
a
g
ed by
c
e as rec
o
e
lectrom
a
a
te at leas
t
d
by ele
c
e
lectronic
e
rty da
m
o
king vess
e
e
both the
p
d
uction ho
tp
s
this can
c
to
drop th
e
y
if the hot
p
a
ring sou
ps
a
nd the c
o
a
tion" on
p
e
is cracke
d
n
ect it fro
m
bl
e electric
s
c
fields!
ea
ring aid
s
electrom
a
o
mmende
d
a
gnetic f
st
1 m aw
a
c
tromagn
e
devices,
cl
m
age
e
ls as the
y
p
ans and
t
tp
late is n
o
c
ause the
h
e
inductio
n
p
late is br
o
ps
and ste
w
o
ntents tog
e
p
age 21).
d
or broke
n
m
the wall
s
hoc
k
.
s
, etc.) c
an
a
gnetic
fi
d
by the
de
ields!
a
y from d
ev
e
tic fields
cl
ocks, etc.
)
y
can quic
k
t
he device
.
o
t subject t
o
h
otplate to
n
hotplate!
o
ken!
w
s. The we
i
e
ther must
n
,
n
be
fi
elds.
e
vice
ev
ices
(e.g.
)
.
k
ly
.
o
ig
ht
not

SilverCrest SIKP 2000 D1
English - 13
 You can damage the induction hotplate by trying to
scrape caramel off it. If you do spill food containing
sugar, remove it immediately before it cools. In general,
any food spillages should be removed immediately.
 Do not use abrasive or astringent detergents or tools
which could scratch the surface. These could damage the
hotplate.
 The induction hotplate has non-slip plastic feet. If
necessary, place something underneath the device, as
work-surfaces are sometimes treated with detergents
which could attack or even dissolve the plastic feet.
Mains cable
Always hold the power cable by the mains plug and never
pull on the cable itself. Never place the device, furniture or
any other heavy objects on the cable and take care that the
cable does not become trapped. Never tie knots in the
mains cable and do not tie it to other cables. All cables must
be laid so that nobody can trip over them or be obstructed
by them. Never use adapter plugs or extension cables that
do not comply with the safety regulations applicable in your
country, and do not modify the power cord yourself. Any
damaged power cord must be replaced by the manufacturer
or authorised customer service.
The induction hotplate is not designed to be used with an external
timer or a separate remote control system.

SilverCrest SIKP 2000 D1
14 - English
Before you start
Unpack the device. First check whether all the parts are complete and undamaged. If any items are
missing or damaged, please phone our hotline (see "Guarantee information" on page 21). Keep the
packaging material away from children and dispose of appropriately.
Introduction to induction cooking
Cooking with an induction hotplate works differently to what you are used to from normal hotplates. The
heat is generated by means of an electromagnetic field in the base of the cooking vessel and not by
means of heat resistors in the heating zone. This saves energy and reduces cooking times.
At high power, the content of the cooking vessel is heated much quicker, it also reacts much more quickly
to the temperature being turned down. You could say that using an induction hotplate is very similar to
cooking with gas.
But you do need special induction-compatible cookware with a ferromagnetic base.
Suitable cookware
Only use ferromagnetic cookware which is suitable for induction hotplates. These should be labelled
accordingly when you buy them. Cookware made of non-magnetic metals (aluminium, copper, etc.) and
other materials (e.g. ceramics, porcelain, glass, etc.) is not suitable.
The base of the cookware must be able to stand flat on the induction hotplate, be smooth and have a
diameter of between 16 and 26 cm.
If the cookware is not the right diameter or is made of unsuitable material, the hotplate
automatically switches off. A beeper sounds every 4 seconds and the error E0 is shown on the
display.

SilverCrest SIKP 2000 D1
English - 15
Getting started
Setup and connection
Place the device on an even, non-slip and dry surface.
Risk of fire!
 Do not place the device on textile surfaces such as a tablecloth.
 Do not place the device unit on metal surfaces. These can heat up quickly and cause a
fire.
 Never place the device under flammable items such as curtains.
 The openings on the bottom of the product must never be covered. Keep a distance of at
least 10 cm clear all around the device and at least 60 cm clear above it to guarantee
sufficient cooling.
Use

If you switch the induction hotplate off and the surface temperature of the heating zone is
higher than 60 °C, "H" is shown on the display. If the temperature drops below 60 °C,
the display shows "L".
 If you remove the pan from the induction hotplate when in use and the surface
temperature of the heating zone is greater than 60 °C, the display shows "H-EO" and a
beeper sounds every 4 seconds. After around 45 seconds, the beeper stops and only
"H" is displayed. About a minute later, the device switches itself off. The display continues
to show "H" as long as the surface temperature of the hotplate is greater than 60 °C. If
the temperature drops below 60 °C, the display shows "L".
 When the hotplate is switched on, the preset power level is 1000 W.
1. Connect the hotplate to a live wall socket using the power cord (1). A beeper then sounds and the
display (7) shows "L" or "H" depending on the temperature.
2. Place a pan on the hotplate (2).
Warning about property damage
 The pan must be explicitly suitable for induction hotplates. Do not use any other pans
(e.g. ceramic ones).
 Be careful when preparing soups and stews. The weight of the cooking vessel and the
contents together must not exceed 10 kg.

Sil
v
16
3.
4.
5.
6.
v
erCrest SIKP 2
0
- English
Press the On
/
Watts (defaul
t
W
hen i
t
cooking
.
Use the rotar
y
display the c
o
beeper will s
o
Risk of
Do not
to
cooking
Use th
e
display
(
1000
W
need to
Risk of
 Oi
l
N
e
 Ri
s
sm
o
p
l
ug
Prepare your
f
controller (11
When you ar
e
(10). A b
e
Warni
n
The coo
l
w
all so
ck

If
y
hi
g
th
e
 If
y
te
m
be
e
0
00 D1
/
Off button (
t
setting 1000
W
t
is running, th
e
.
This is not a m
a
y
controller (11)
o
oking temperat
u
o
und by way of
c
f
burns!
to
uch the conta
ct
vessel is remov
e
e
function key
(
6
)
. However,
p
W
and the temp
e
make sure your
f
fire!
l
and fat can ca
t
e
ver leave hot o
i
s
k of explosi
o
o
ther it by cove
r
ug
from the wall
f
ood. While yo
u
).
e
finished, switc
h
e
eper then soun
n
g about pro
p
l
ing fan runs fo
r
c
ket while the c
oo
y
ou switch the in
d
g
her than 6
0
°
C,
e
display shows
y
ou remove the
p
m
perature of the
e
per sounds ev
e
10) to switch th
e
W
).
e
cooler fan is
a
a
lfunction.
to set the powe
u
re on the displ
a
c
onfirmation.
ct
surface a coo
k
e
d, the cooking
s
(12) to s
w
p
lease note th
a
e
rature to 12
0
food does not
b
t
ch fire i
f
over-h
e
i
l or fat unatten
d
o
n
!
Never atte
m
r
ing the cooking
socket.
u
are cooking, s
e
h
off the inducti
o
ds and the disp
l
p
erty dama
g
r
a while after y
o
oo
ling fan is still
r
d
uction hotplat
e
C,
"H" is shown
o
"L".
p
an from the in
d
hotplate is gre
a
e
ry 4 seconds.
A
e
hotplate on. T
h
a
lso running a
nd
r required in W
a
a
y (7) and adju
s
k
ing vessel has
p
s
urface can still
w
itch between
at
when you s
w
°C, irrespectiv
e
b
urn.
e
ated. Therefor
e,
d
ed.
m
pt to extinguis
h
pan with a wel
l
e
t the power or
t
o
n hotplate. To
d
ay (7) shows "L
"
e
o
u switch off. D
o
r
unning.
e
off and the sur
f
on
the display. I
f
d
uction hotplate
w
a
ter than 6
0
°C,
A
fter around 45
s
h
e display (7) s
h
n
d the hotplate
a
tts or press the
s
t it using the rot
a
p
reviously been
s
be very hot.
the power (5)
w
itch over, the
p
e
of what it wa
s
e,
be careful wh
e
h
burning oil or
fa
ll
-fitting lid or pla
t
emperature yo
u
d
o this, press the
" or "H" depend
o
NOT remove
t
f
ace temperatur
e
f
the temperatur
e
w
hen in use an
d
the display sh
ow
s
econds, the be
e
h
ows the power
c
an hum slight
ly
function key
a
ry controller (1
s
tanding on. Af
te
and the tem
p
p
ower is alwa
ys
s
set to before.
e
n heating oil a
n
fa
t with water. I
n
t
e. Unplug the
m
u
want using the
On/Off button
ing on the temp
e
t
he mains plug
f
e
of the hotplat
e
e
drops below
60
d
the surface
ow
s "
H
-EO" and
a
e
per stops and
o
level in
ly
when
(12) to
1). A
e
r the
p
erature
s
set to
So you
n
d fat.
n
stead,
m
ains
rotary
e
rature.
fr
om the
e
is
60
°C,
a
o
nly

SilverCrest SIKP 2000 D1
English - 17
"H" is displayed. About a minute later, the device switches itself off. The display continues
to show "H" as long as the surface temperature of the hotplate is greater than 60 °C. If
the temperature drops below 60 °C, the display shows "L".
Switching off using the timer
You can program the timer to switch the hotplate off automatically after a preset time.
1. Press the sensor button for the timer (9) when cooking with the hotplate to program the timer.
2. Use the rotary controller (11) to set the cooking time you want (hours:minutes) before the hotplate is
to switch off.
You can program the cooking time to between 00:00 to 3:00 hours.
The time set flashes briefly and then the remaining time (countdown) is shown on the display (7).
If the timer is activated, the indicator (4) lights up and alternates showing the power or temperature and
the remaining time at around 5 second intervals.
If necessary, you can adjust the power or temperature using the rotary controller (11).
Once the countdown reaches zero, the hotplate automatically switches off. A beeper sounds.
In order to switch the hotplate off manually before the time has elapsed, press the On/Off
button (10).
Child lock
The induction hotplate has a child lock so that the settings cannot be changed accidentally.
How to activate or deactivate the child lock:
1. Press the button (8) once. An acoustic signal can be heard and the indicator (3) lights up. The
child lock is now activated.
2. Press and hold the button (8) for 3 seconds. An acoustic signal can be heard and the indicator
(3) light goes out. The child lock is now deactivated again. You can use the hotplate as normal.
You can also activate the child lock when the induction hotplate is switched off.

SilverCrest SIKP 2000 D1
18 - English
Maintenance / cleaning
In order to avoid burning food residues, clean the hotplate after every use.
Risk of burns!
Wait until the heating zone is completely cool before cleaning it. Otherwise you could get
burnt.
Risk of electric shock!
 Always remove the mains plug from the socket before cleaning. Failure to do so could
cause an electric shock.
 Do not poor or spray liquids onto the induction hotplate or through the ventilation slots.
This could cause short circuits which could cause electric shocks or burns.
Warning about property damage
Do not use abrasive or astringent detergents or tools which could scratch the surface. These
could damage the hotplate.
Clean the side surfaces and the mains cable with a slightly damp cloth.
Dirt and burnt-on food residues on the surface of the heating zone can be cleaned off using a scraper for
glass hotplates and an appropriate detergent.