Simpli Home brooklyn + max WyndenHall AXCHUN-08-WAL User manual

Hunter / Moreno / Diaz
TV Media Stand
Model # AXCHUN-08-WAL
TM
TM
1

It's time to register your product warranty.
It's quick and easy. And you'll be happy you did.
simpli-home.com/product-registration
Great quality is a right.
Thank you for shopping with Simpli Home,
America's top brand for high-value furniture.
Activate your 1-year warranty
Automatic entry to win a $500 gift certificate
Earn instant rewards and save
ü
ü
ü
2

Review your product and collect rewards!
Thank you for your purchase! We hope you enjoy it. We’d love
your feedback. Please share a review and get instant rewards!
simpli-home.com/product-review
Share photos and get your cash back!
Send us images or share them on social and qualify for instant
rewards. You may even receive store credit on your entire purchase!
simpli-home.com/share-images
3

For Fastest Customer Service:
1. Open your phone’s camera.
2. Point your phone’s camera at the QR code to scan.
3. Click on the pop up.
4. You’ll be taken to our customer service page.
5. Fill the form with your order information and issue.
6. Submit form.
7. A customer service associate will contact you.
Other ways to contact us…
Visit Us
Visit our site directly at
www.simpli-home.com
Email Us
[email protected]
Call Us
1-866-518-0120
Monday to Friday
9am to 5pm EST
*If you’ve purchased from a retailer and you wish to return the product, please
contact the retailer directly.
4

CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
Safety Information
IMPORTANT : Please read this manual carefully before beginning assembly
of this product. Keep this manual for future reference.
5

Care & Maintenance
6
This furniture is designed for indoor use.
Damage to furniture can come from temperature changes in relative humidity (RH)
in our homes. Humid air oxidizes metal which results in rusting, corrosion, tarnishing
and roughness. Wood absorbs water as relative humidity rises and falls, and in doing
so it swells and shrinks.
To protect against the humidity effect, the metal is powder coated. The powder coat
layer protects the metal from oxidizing, corrosion, tarnishing and scratching and
keeps it looking good for years to come. The wood is sealed and lacquered to
protect against humidity.
To help protect your furniture, follow these steps:
·Use a humidifier, preferably one with an automatic control system that can
sense the humidity level and adjust itself accordingly
·Dust with soft dry cloth
·Wipe up spills promptly
·Clean with a dry cloth
·Do not use abrasive cleaners, chemical solvents, strong detergents, cleaners
with bleach, and furniture polish
·Use soft felt base coasters, placemats to help prevent scratches
·Keep furniture out of direct sunlight, which can cause cracking or roughness
on the protective layer
·If it can be avoided, do not put furniture near heating vents
·Keep the furniture 3 to 4 inches away from the wall, giving heat and air space to
circulate.

7
WARNING Do not place toys, food, etc. on the top shelves or upper drawers.
Serious injury or death may occur when children climb on furniture. A remote
control or items placed on the furniture may encourage a child to climb on the
furniture and as a result make it top-heavy and cause it to tip over on the child.
WARNING Do not place a TV that exceeds the weight limits or size guidelines
shown in the instructions specified for the furniture. Do not overload shelves
or place heavy items on top shelves or drawers.
Improper use of furniture to support TVs may result in serious injury or death.
WARNING Do not relocate audio and/or video equipment to furniture not
specifically designed to support audio and/or video equipment. Do not move
furniture without shelves or drawers unloaded. Furniture can collapse or tip
over onto a child and cause physical injury or death.
This TV Stand does not come with legible instructions pertaining to the risk of
fire and electric shock that is associated with the use of electrical components
such as operation, user-maintenance, loading, storage and as applicable
electrical issues including grounding or double-insulation.
Any use of this item other than that recommended by the manufacturer in this
manual may cause fire, burns, electric shock and/or serious injuries or death.
WARNING
The maximum diagonal CRT television screen size is 25 inch to 27 inch (63.50 cm to
68.58 cm). For use with televisions weighing 130 lbs or less. Using larger or heavier
televisions may cause instability or tip over which can lead to serious injury or even
death.
The recommended maximum width of the television intended for use is 65 inch
(167.64 cm).
MAXIMUM LOAD 130 LBS
MAXIMUM LOAD 25 LBS

8
WARNING
For use with televisions weighing 130 lbs or less.
Use with heavier televisions may result in instability causing tip over
resulting in death or serious injury.
If a customer wants to use this unit as a TV stand, you must install
the TV at position 4 inches from the front edge of console to
prevent it from tipping over. Do not place TV in front of this
position.
MAXIMUM LOAD 130 LBS
Load 4 inch from edge
MAXIMUM LOAD 25 LBS
4 inch
MODEL#: AXCHUN-08-WAL
DISTRIBUTION: SIMPLI HOME
ADDRESS: Tumwater, WA 98512-0410- USA
COUNTRY OF ORIGIN: VIET NAM

Part Description
Model # AXCHUN-08-WALPre-Assembly Information
9
TOP
QTY 1 LEFT SIDE
QTY 1 RIGHT SIDE QTY 1
.DR
.G
.C.DL
.E.FR
.FL
CENTER SHELF
QTY 1
LEFT DOOR
QTY 1
BACK PANEL
QTY 1
BOTTOM SHELF
QTY 1 LEFT DIVIDER
QTY 1
SHELF
QTY 2
RIGHT DIVIDER
QTY 1
.BR
.A.BL
.H
LEG
QTY 4
Warning Label
.I
RIGHT DOOR
QTY 1
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant

Hardware Description
Model # AXCHUN-08-WALPre-Assembly Information
10
ALLEN KEY
QTY 1
ALLEN KEY BOLT
M8 x 20 mm
QTY 12
LOCK WASHER
Ø12 / Ø8 x 1.5 mm
QTY 12
WASHER
Ø19 / Ø8 x 1 mm
QTY 12
MAGNET AND PLATE
QTY 2 SETS
SHELF SUPPORT
QTY 12
PHILLIPS SCREW
M3 X 15mm
QTY 8
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25mm - QTY 2
( 1 is extra )
b. M4 X 15mm - QTY 1
c. M4 X 25mm - QTY 1
PHILLIPS SCREW ROUND HEAD
M4 X 15mm
QTY 22
PHILLIPS SCREW
M4 X 15mm
QTY 24
ADJUSTABLE HINGE
Ø35
QTY 4
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
.1
ALLEN KEY SCREW
M6 X 30mm
QTY 24
CAM LOCK PIN
CAM LOCK
QTY 6 SETS
.2.3
WOOD DOWEL
Ø8 X 30mm
QTY 4
.4.5.6
.7.8.9
.10 .11 .12
.13 .14

Model # AXCHUN-08-WALComponents - Key Diagram
11
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
A
I
BL
BR
DL
C
DR
I
E
FL
FR
G
H
H

Model # AXCHUN-08-WALAssembly
Step 1
P
X
12
3. Insert two Dowels 3 into guide holes on each Side BL ,BR .
4. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/3 length of
Dowels should be exposed.
Front / Avant
Front / Avant
Front / Avant
Front / Avant
2
DL DR
BL BR
2
1. Attach three Cam Lock Pins 2 into pre-drilled holes on each Divider DL ,DR.
2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
3
3

Model # AXCHUN-08-WALAssembly
Step 2
13
DL
DR
Front /
Avant
Front / Avant
Front / Avant
Front / Avant
G
G
1. Align Cam Lock Pins with guide holes on Centre Shelf G and
attach Dividers DL , DR to Centre Shelf G .
2. Insert six Cam Locks 2 into guide holes on Centre Shelf G .
3. Use Phillips screwdriver to secure Cam Locks. Do not over-tighten.
DL
DR
2

Step 3
Model # AXCHUN-08-WALAssembly
14
1. Use three Allen Key Screws 1 to attach each Divider DL , DR through guide holes
from Bottom Shelf C to pre-drilled holes of Dividers DL , DR .
2. Use Allen Key 4 to tighten Screws. Do not over-tighten.
DL
DR
Front / Avant
Front / Avant
Front / Avant
C
Front / Avant
C
DL
DR
Front / Avant
Front / Avant
1
4
1
1

Step 4
Model # AXCHUN-08-WALAssembly
15
1. Align Wood Dowels with guide holes on Bottom Shelf C and attach Sides BL , BR
to Bottom Shelf C .
2. Use three Allen Key Screws 1 to attach each Side BL , BR through guide holes.
3. Use Allen Key 4 to tighten Screws. Do not over-tighten.
BL
BR
C
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front /
Avant
C
BL
BR
1
4
1
1

Step 5
Model # AXCHUN-08-WALAssembly
16
1. Align Wood Dowels with guide holes on Top A and
attach parts BL , BR , DL , DR to Top A .
2. Use three Allen Key Screws 1 to attach each part BL , BR , DL , DR through
guide holes.
3. Use Allen Key 4 to tighten Screws. Do not over-tighten.
Front /
Avant
Front / Avant
Front /
Avant
Front / Avant
C
BL
BR
DL
DR
A
1
4
1
1
4
1
Front / Avant
Front / Avant
Front / Avant
C
Front / Avant
BL
BR
DR
DL
A
Front / Avant

Step 6
Model # AXCHUN-08-WALAssembly
17
Note: Levelers on bottom of legs can be adjusted if floor is uneven.
11
12
13
4
1. Attach Legs I to Bottom Shelf C .
2. Use twelve Allen Key Bolts 11 , twelve Lock Washers 12 and twelve Washers 13 to
secure Legs I and Bottom Shelf C (three Bolts, three Lock Washers and three
Washers on each Leg).
3. Use Allen Key 4 to tighten Bolts. Do not over-tighten.
C
I
I

Step 7
Model # AXCHUN-08-WALAssembly
18
Note:
The back of the TV frame does not have
pre-drilled holes to attach the back panels.
1. Attach the Back Panel E to back frame using Phillips Screws Round Head 9
through guide holes from Back Panels.
2. Use Phillips Screwdriver to tighten screws. Do not over-tighten.
Warning Label
E
Front /
Avant
Front /
Avant
9
E
Front /
Avant
Front /
Avant

Step 8
Model # AXCHUN-08-WALAssembly
19
1. Attach Adjustable Hinges 7 to Doors FL , FR using Phillips Screws 8 into
pre-drilled holes on Doors FL , FR .
2. Attach Adjustable Hinges 7 on Doors FL , FR to Sides BL , BR using Phillips Screws 8
into pre-drilled holes on Sides BL ,BR.
3. Use Phillips screwdriver to snugly tighten screws. Do not over-tighten.
FL
8 7
7
8
BR
BL
FR
FL
FR

Step 9
Model # AXCHUN-08-WALAssembly
20
Tighten the Screw marked II to fasten hinge. The door may need to
be adjusted so that all the spaces between the door and the unit sides are equal.
To adjust, follow instructions:
1. Side adjustment 4 mm
To move the door towards the side panel, loosen screw I and tighten screw II .
To move the door away from the side panel, loosen screw II and tighten screw I .
2. Depth adjustment 4 mm
Loosen screw II ( just one turn ), adjust door to desired position, re-tighten screw.
3. Height adjustment
Loosen screw 9 , adjust door to desired position, re-tighten screw.
8
II I
IMPORTANT NOTE: