HITCHFIRE CUTTING BOARD SIDE TABLE User manual

HITCHFIRE
CUTTING BOARD
SIDE TABLE
OWNER’S MANUAL
Read this manual carefully before assembly, using, or servicing this item.
PATENT PENDING

2
TABLE OF CONTENTS
OPERATING INSTRUCTIONS
PARTS LIST
ASSEMBLY INSTRUCTIONS
LIMITED WARRANTY
4
5
6
8

3

4
1. Remove the Cutting Board Side Table from weather proof carrying case
and place top down on a flat surface.
2. Using the provided allen wrench, unscrew bolts holding legs to the
bottom baseplate of the board being sure not to misplace them as they
will be used to mount the board to the Swing Arm.
3. Locate the holes on the side of the lower arm of the swing arm. Set the
curved end of one of the cutting board legs on the lower arm of the swing
arm and thread one of the bolts through the leg hole and into the swing
arm. Tighten.
4. Repeat step three for the second leg.
5. With both legs standing up on the lower arm of the swing arm, align the
two square holes on the bottom of the cutting board baseplate with the
legs on the swing arm. Use the remaining two allen bolts to secure the
cutting board baseplate by tightening them down through the threaded
hole on the sides of the square mounting holes on the bottom of the
baseplate.
6. The bottom of the cutting board has two small silver latches to hold the
baseplate in place. For best use, use a small Phillips head screwdriver to
securely mount the cutting board to the baseplate.
OPERATING INSTRUCTIONS

5
PARTS LIST
Legs x2
Baseplate
Cutting Board Bottom
(Baseplate & Legs Attached)
Allen Bolts x4
Cutting Board (Top)
BASEPLATE ASSEMBLY

6
ASSEMBLY - ATTACHING THE
CUTTING BOARD
Slide the swing away arm assembly
into your hitch and secure it with
the hitch stabilizer bolt.
A.Pull out and twist the hinge spring lock.
B.Release the slam-latch by pressing
down on the lever.
Swing the arm away from the vehicle and
lock at the 90 degree position for stability.
Place the Ledge platform onto the arm.
Using two allen bolts, mount legs to the
lower arm of the swingarm.
Once legs are secure, place cutting board
on top of legs and screw bolts in to secure
surface.
Tighten the bolt using
a wrench, make sure
to tighten the bolt all
the way through to
the other side of the
hitch, slide the cotter
pin into the bolt.
DO NOT MOVE VEHICLE UNLESS THE
SWING AWAY ARM ASSEMBLY IS
SECURELY BOLTED ONTO THE HITCH.
1 2
3
4

7

8
LIMITED WARRANTY
What Is Covered
HitchFire, warrants to the original purchaser that its products listed below
are free from defects in material and workmanship, for the term described,
except as qualified below. The life of the product is determined from the
date of purchase until such time as the product is no longer serviceable
due to normal wear and tear.
Steel & Aluminum Castings
All Remaining Parts
When Assembled and operated in accordance with the accompanying
printed instructions.
What Is Not Covered
HitchFire shall not be responsible for the natural breakdown of materials
that occurs inevitably with extended use (e.g., Ultra Violet (UV) light
damage on grill, or defects caused by accident, abuse, alteration, animal
attack, storm damage, misuse or improper care, vandalism, improper
installation improper maintenance or service, failure to perform normal
and routine maintenance, including but not limited to, damage caused by
insects within the burner tubes, as set out in this owner’s manual warranty
section.
Deterioration or damage due to severe weather conditions such as hail,
hurricanes, earthquakes, or tornadoes including rust, discoloration due to
exposure to chemicals (including salt) either directly or in the atmosphere,
or very high humidity, is not covered by this limited Warranty.
THERE ARE NO OTHER EXPRESS WARRANTIES BEYOND THE TERMS OF
THIS LIMITED WARRANTY. IN NO EVENT SHALL HitchFire BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply
to you.

9
What HitchFire Will Do
If after inspection we find that a product failed due to a manufacturing or
material defect, we will repair or replace the product, at our option, without
charge.
How To Obtain Warranty Service
Return the product, freight prepaid, to the HitchFire Dealer from whom it
was purchased; or, contact HitchFire Customer Satisfaction Department
for return authorization: toll free 1-800-515-5286. Collect shipments or
shipments without return authorization cannot be accepted.
REPAIRS
If your HitchFire product needs service or repair due to normal wear and
tear, animal attack, accident or some other reason that is not covered
under the warranty we will provide the necessary service for a reasonable
charge, plus shipping and handling. We require that products accepted
for any repair be properly cleaned according to our recommended care
instructions. Please send your product that requires repair, postage
prepaid, along with a description of what needs attention. For service and
repairs, please contact our Customer Satisfaction Department: toll free
1-800-515-5286
How State Law Relates To This Warranty
This warranty gives you specific legal rights, and you may have other rights
that vary from state to state.
Warranty Term
Limited two year warranty applies to all components.

10
IMPORTANT USER/ CONSUMER:
This instruction manual contains important information necessary for the
proper assembly and safe use of this appliance. Read and follow all
warnings and instructions before assembling and using the appliance.
KEEP THIS MANUAL FOR REFERENCE
HITCH FIRE INC. (DBA HitchFire)
2510 Rosedale Ave.
Soquel, CA 95073
www.hitchfire.com
support@hitchfire.com
1-800-515-5286 @Hitchfire