Simpli Home brooklyn+max WyndenHall INT-AXCSM-BNCH-EB User manual

Sea Mills / Lancaster / Dover
Entryway Storage Bench
Model # INT-AXCSM-BNCH-EB
1

Great quality is a right.
Thank you for shopping with Simpli Home,
America's top brand for high-value furniture.
It's time to register your product warranty.
It's quick and easy. And you'll be happy you did.
üAcvate your 1-year warranty
üAutomac entry to win a $500 gi cerficate
üEarn instant rewards and save simpli-home.com/product-registraon
2

Thank you for your purchase! We hope you enjoy it. We’d love
your feedback. Please share a review and get instant rewards!
simpli-home.com/product-review
Review your product and collect rewards!
Send us images or share them on social and qualify for instant rewards.
You may even receive store credit on your enre purchase!
simpli-home.com/share-images
Share photos and get your cash back!
3

For Fastest Customer Service:
*If you’ve purchased from a retailer and you wish to return the product, please
contact the retailer directly.
Visit Us
Visit our site directly at
www.simpli-home.com
Call Us
1-866-518-0120
Monday to Friday
9am to 5pm EST
Email Us
customerser[email protected]
Other ways to contact us…
1. Open your phone’s camera.
2. Point your phone’s camera at the QR code to scan.
3. Click on the pop up.
4. You’ll be taken to our customer service page.
5. Fill the form with your order informaon and issue.
6. Submit form.
7. A customer service associate will contact you.
4

Identify all the parts and hardware. Do not discard of the packaging until you have
checked that you have all the parts and hardware required. Hardware package may
have spare parts.
We recommend that you assemble this unit on a carpeted floor to avoid scratches.
If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
WARNING: This item contains small parts which can be swallowed by children and
pets. Keep children and pets away during assembly. To avoid danger of suffocation,
always keep plastic bags away from children and pets.
IMPORTANT: Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
Safety Information
5

Care & Maintenance
This furniture is designed for indoor use.
Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative
humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls,
and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally
along different grain directions. As humidity changes, the components of wooden objects are
continually pushing and pulling against each other. This pressure often results in parts of furniture
no longer fitting together closely or becoming distorted or breaking from their own internal
stresses.
The response to relative humidity changes begins with determining the annual average RH for your
particular space. Then try to keep the RH in the space where your furniture is as close to that
average as possible, generally within about 10% up or down. De-humidify in the summer and
humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern heating
systems, which can drive down interior RH in the winter, almost invariably cause problems for
furniture. To counteract their effect, you can either modify the RH by keeping furniture containing
spaces cooler in the winter or most importantly, have a good working humidifier for your home. A
humidistat automatically works to balance the humidity in your home so it is constant. Dry indoor
air can suck enough moisture from its surroundings to do permanent damage to wood, causing it
to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how rapidly a
wood will lose moisture are pore size and surface hardness. A piece made from a dense and hard
wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished piece
while pieces with veneer finishes are not only stronger but lose moisture more slowly than other
finishes.
To help protect your wood furniture, take these steps:
level and adjust itself accordingly
• If you can avoid it, don't put furniture near heating vents; if you can’t, keep the item 3 to 4 inches
• Dust with soft dry cloth
• For soil build-up, wipe with damp cloth & dry
• Do not use abrasive cleaners
away from the wall, giving the heat and air space to circulate
• Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp
• Do not use liquid or aerosol products
• Use a humidifier, preferably one with an automatic control system that can sense the humidity
• To avoid marking, do not place rubber on surface (foot pads, etc.)
• Don't over-humidify; that can damage wood by causing it to expand and contract
6

AL
LEFT SIDE
QTY 1
AR
RIGHT SIDE
QTY 1
B
SEAT
QTY 1
C
BOTTOM SHELF
QTY 1
D
BOTTOM SUPPORT
QTY 1
E
BACKREST
QTY 1
BACK PANEL
QTY 1
F G
DIVIDER
QTY 1
H
DIVIDER
QTY 4
Front /
Avant
Front
/
Avant
Front
/
Avant
Front
/
Avant
Front / Avant
7
Part Description
Pre-Assembly Information Model # INT-AXCSM-BNCH-EB

BOTTOM SUPPORT LEG
QTY 1
I J
DRAWER FRONT
QTY 2
KL
LEFT DRAWER SIDE
QTY 2
KR
RIGHT DRAWER SIDE
QTY 2
L
DRAWER BACK
QTY 2
DRAWER BOTTOM
QTY 2
M
8
Part Description
Pre-Assembly Information Model # INT-AXCSM-BNCH-EB

1 2 3
4 5
WOOD BOLT CAP
QTY 4
ALLEN KEY
QTY 1
ALLEN KEY SCREW
M6 x 30 mm
QTY 22
6
7 8 9
PHILLIPS SCREW ROUND HEAD
M4 x 15 mm
QTY 16
CAM LOCK PIN
CAM LOCK
QTY 8 SET
ALLEN KEY BOLT
M6 x 50 mm
QTY 8
WOOD DOWEL
8 X 30 mm
QTY 22
PHILLIPS SCREW
M4 X 30 mm
QTY 8
PHILLIPS SCREW
M4 X 25 mm
QTY 4
Required -
Phillips screwdriver
Rubber mallet
Not Included
9
Hardware Description
Pre-Assembly Information Model # INT-AXCSM-BNCH-EB

AL
E
B
G
D
HHHH
C
I
AR
F
KL
KR
M
L
J
Front / Avant
Front /
Avant
Front
/
Avant
Front
/
Avant
Front
/
Avant
10
Components - Key Diagram Model # INT-AXCSM-BNCH-EBComponents - Key Diagram Model # INT-AXCSM-BNCH-EB

Step 1
Step 2
1. Slide Drawer Bottom M firmly into slots on Drawer Sides KL , KR and
Drawer Front J .
1. Attach 4 Cam Lock Pins 2 to back of Drawer Front J .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides KL , KR .
3. Insert 2 Cam Locks 2 into pre-drilled holes on each Drawer Side KL , KR .
4. Use flathead screwdriver secure Cam Locks.
2
KL
KR
M
J
KL
KR
11
Assembly Model # INT-AXCSM-BNCH-EB

Step 3
Repeat Step 1-3 for the second drawer.
2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each Side KL , KR.
2. Use Allen Key 3 to tighten screws. Do not over-tighten.
1. Align Drawer Back L with Drawer Sides KL , KR .
3
1
KR
KL
12
Assembly Model # INT-AXCSM-BNCH-EB

Step 4
2. Use rubber mallet to tap Dowels 7 into bottom of holes securely. ½ length of dowels
should be exposed.
1. Insert 16 Wood Dowels 7 into 4 Dividers H ( 4 Dowels per each Divider ).
3. Hold Bottom Shelf C upright and attach 4 Dividers H by inserting exposed dowel
ends into matching pre-drilled holes on Bottom Shelf C .
5. Align exposed dowels of Dividers H to holes on Bottom Support D .
6. Insert 4 Phillips Screw 5 into pre-drilled holes in centre of Bottom Support D and
use Phillips screwdriver to snugly tighten. Do not over-tighten.
4. Insert 4 Phillips Screws 5 into pre-drilled holes through centre of Bottom Shelf C
into Dividers H and use Phillips screwdriver to snugly tighten. Do not over-tighten.
H
H
H
H
C
D
5
7
7
7
7
H
5
5
MODEL # INT-AXCSM-BNCH-EB
Front
/
Avant
Front
/
Avant
13
Assembly Model # INT-AXCSM-BNCH-EB

Step 5
dowels should be exposed.
1. Insert 2 Dowels 7 into Bottom Shelf C and one Dowel 7 into Bottom Support D .
5. Use Allen Key 3 to tighten Bolts. Do not over-tighten.
4. Attach Left Side AL to Bottom Support D using 2 Allen Key Bolts 6 .
3. Attach Left Side AL to Bottom Shelf C using 2 Allen Key Bolts 1 .
2. Use rubber mallet to tap Dowels 7 into bottom of holes securely. ½ length of
7
1
1
6
3
3
7
C
D
AL
Front / Avant
Front
/ Avant
Front / Avant
14
Assembly Model # INT-AXCSM-BNCH-EB

Step 6
3. Attach Bottom Support Leg I to Bottom Shelf C using 4 Phillips Screws 9 into
1. Attach Divider G to Bottom Support D using 2 Allen Key Screws 1 .
2. Use Allen Key 3 to tighten screws. Do not over-tighten.
pre-drilled guide holes.
4. Use Phillips screwdriver to tighten screws. Do not over-tighten.
I
G
1
3
9
AL
Front / Avant
Front
/ Avant
Front
/
Avant
Front
/
Avant
Front
/
Avant
15
Assembly Model # INT-AXCSM-BNCH-EB

Step 7
2. Use Allen Key 3 to tighten Screws. Do not over-tighten.
1. Attach Seat B to Left Side AL and Divider G using 5 Allen Key Bolts 1 .
B
1
1
3
AL
Front /
Avant
Front
/
Avant
Front
/ Avant
Front
/
Avant
Front
/
Avant
16
Assembly Model # INT-AXCSM-BNCH-EB

Step 8
1. Attach Backrest E to Left Side AL using 2 Allen Key Bolts 6 .
2. Use Allen Key 3 to tighten Bolts. Do not over-tighten.
E
6
6
3
AL
Front / Avant
Front /
Avant
17
Assembly Model # INT-AXCSM-BNCH-EB

1. Repeat Step 5, Step 7 & Step 8 for the Right Side AR .
Step 9
1
1
3
3
6
7
1
3
6
3
AL
AR
Front
/ Avant
Front
/
Avant
18
Assembly Model # INT-AXCSM-BNCH-EB

Step 10
1. Attach Back F to back frame using 16 Phillips Screw Round Heads 4 .
2. Use Phillips screwdriver to snugly tighten screws.
3. Insert 4 Wood Bolt Caps 8 into exposed bolt holes on side of bench.
4. To remove drawer, locks need to be spueezed simultaneously.
3. Drawer will lock into place with plastic locks on drawer glides.
1. Insert assembled drawers into slots on assembled bench.
2. Drawer can be inserted into either side of bench opening.
Step 11
4
F
8
19
Assembly Model # INT-AXCSM-BNCH-EB