Simpli Home WyndenHall brooklyn + max AXCRED72-BRU User manual

REDMOND / MANSFIELD / STANWICK
72 INCH TV MEDIA STAND
1/24
MODEL # AXCRED72-BRU
TM
TM
SI
M P HOME®
LIFE BY DESIG N

2/24
TM
TM
SI
M P HOME®
LIFE BY DESIG N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am –4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following
information ready:
Model # _________________Part Number or Letter_____________________
Purchased at ____________Date of Purchase _________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

3/24
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
SAFETY INFORMATION

4/24
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted
or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger, but lose moisture more
slowly than other finishes.
To help protect your wood furniture, take these steps:
·Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly. Don't over-humidify; that can damage wood
by causing it to expand and contract.
·Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
·If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3
to 4 inches away from the wall, giving the heat and air space to circulate.
·Dust with soft dry cloth.
·Do not use liquid or aerosol products.
·To avoid marking, do not place rubber on surface (foot pads, etc.)
·For soil build-up, wipe with damp cloth & dry.
·Do not use abrasive cleaners.
CARE and MAINTENANCE
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

PART DESCRIPTION
5/24
AL
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
TOP
QTY 1
BOTTOM SHELF
QTY 1
LEFT LARGE DIVIDER
QTY 1
LARGE DOOR (L&R Same)
QTY 2
B
C DL
EFGL
LEFT BACK PANEL
QTY 1
CABINET SHELF
QTY 2
LEFT SIDE
QTY 1
AR
RIGHT SIDE
QTY 1
RIGHT LARGE DIVIDER
QTY 1
DR
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
PRE-ASSEMBLY INFORMATION MODEL # AXCRED72-BRU

PART DESCRIPTION
6/24
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
GR
RIGHT BACK PANEL
QTY 1
TOP SHELF
QTY 1 DRAWER FRONT
QTY 1
HI JL
LEFT DRAWER SIDE
QTY 1
G1 G2
TOP BACK PANEL
QTY 1 BOTTOM BACK PANEL QTY 1
KL
DRAWER BACK
QTY 1
DRAWER BOTTOM
QTY 1
JR
RIGHT DRAWER SIDE
QTY 1
Warning Label
PRE-ASSEMBLY INFORMATION MODEL # AXCRED72-BRU

PART DESCRIPTION
7/24
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
SUPPORT LEG
QTY 2
P QL
SMALL DOOR (L&R Same)
QTY 2
MIDDLE SHELF
QTY 1
FLIP DOWN DOOR
QTY 1 SMALL DIVIDER
QTY 1
LEFT MIDDLE DIVIDER
QTY 1
R
MNO
QR
RIGHT MIDDLE DIVIDER
QTY 1
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
PRE-ASSEMBLY INFORMATION MODEL # AXCRED72-BRU

HARDWARE DESCRIPTION
8/24
ALLEN KEY SCREW
M6 X 30mm
QTY 52 ALLEN KEY QTY 1
PHILLIPS SCREW
ROUND HEAD
M4 X 15mm
QTY 31
SHELF SUPPORT
QTY 12
PHILLIPS SCREW
M3 X 12mm
QTY 24
MAGNET AND PLATE
QTY 5 SETS
123
456
8
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
CAM LOCK PIN
CAM LOCK
QTY 10 SETS
9
7
PHILLIPS SCREW
M3 X 15mm
QTY 20
HANDLE
M4 X 22mm
QTY 4 SETS
PRE-ASSEMBLY INFORMATION MODEL # AXCRED72-BRU

13
PHILLIPS SCREW
M4 X 30mm
QTY 8
HARDWARE DESCRIPTION
9/24
10 11
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
14
HANDLE
M4 X 10mm
QTY 2 SETS
Required -
Flathead screwdriver
Phillips screwdriver
Not Included
HINGE
QTY 2 SETS
PHILLIPS SCREW
M3.5 X 12mm
QTY 12
12
a.M4X25mm-QTY2
(1isextra)
b.M4X15mm-QTY1
c.M4X25mm-QTY1
FURNITURETIPOVERRESTRAINT
QTY1SET
PRE-ASSEMBLY INFORMATION MODEL # AXCRED72-BRU

N
M
B
G1
F
M
C
R
R
F
H
O
K
LI
10/24
AL
AR
DL
DR
J L
J R
QR
QL
E
E
P
P
GR
GL
G2
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
COMPONENTS-KEY DIAGRAM MODEL # AXCRED72-BRU

STEP-1
STEP-2
11/24
1. Attach four Cam Lock Pins 9 to back of Drawer Front I .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides JL , JR .
3. Insert two Cam Locks 9 into pre-drilled holes on each Drawer Side JL , JR .
4. Use flathead screwdriver to secure Cam Locks.
1. Slide Drawer Bottom L firmly into slots on Drawer Sides JL , JR
and Drawer Front I .
I
9
L
I
J
L
J R
J L
J
R
ASSEMBLY MODEL # AXCRED72-BRU

STEP-3
STEP-4
12/24
1. Align Drawer Back K with Drawer Bottom L and press firmly into slot.
2. Attach Drawer Back K using two Allen Key Screws 1 through pre-drilled holes on
each Side JL , JR .
3. Use Allen Key 2 to tighten Screws. Do not over-tighten.
NOTE: The screwdriver is not
included in the hardware pack.
1. Use phillips screwdriver to attach Handle 10 to Drawer Front I .
K
L
1
2
10
I
J L
J R
ASSEMBLY MODEL # AXCRED72-BRU

STEP-5
STEP-6
13/24
1. Attach Middle Dividers QL , QR to Middle Shelf N using six Allen Key Screws 1
(three screws on each Middle Divider).
2. Use Allen Key 2 to tighten. Do not over-tighten.
1. Attach six Cam Lock Pins 9 to underneath of Top Shelf H .
2. Align Cam Lock Pins with pre-drilled holes and attach Middle Dividers QL , QR .
3. Insert three Cam Locks 9 into pre-drilled holes on each Middle Divider QL , QR .
4. Use flathead screwdriver to secure Cam Locks.
N
1
2
9
H
QL
QR
QL
QR
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCRED72-BRU

2
1
STEP-7
14/24
1. Attach Large Dividers DL , DR to Top Shelf H using six Allen Key Screws 1
(three screws on each Divider).
2. Use Allen Key 2 to tighten Screws. Do not over-tighten.
H
DL
DR
Front / Avant
Front /
Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCRED72-BRU

STEP-8
15/24
1. Attach Bottom Shelf C to Middle Dividers QL , QR and Large Dividers DL ,DR
using twelve Allen Key Screws 1 (three screws on each Divider).
2. Attach Small Divider O to Top Shelf H using three Allen Key Screws 1
3. Use Allen Key 2 to tighten. Do not over-tighten.
1
2
O
H
C
1
2
1
2
DL
DR
QL
QR
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCRED72-BRU

STEP-9
16/24
1. Attach Sides AL , AR to Bottom Shelf C using six Allen Key Screws 1
(three Screws on each Side).
2. Use Allen Key 2 to tighten Screws. Do not over-tighten.
3. Attach Support Legs R to Bottom Shelf C using eight Phillips screws 11 (four
Phillips screw on each Support Leg).
4. Use Phillip Screwdriver to snugly tighten screw.
NOTE: The screwdriver is not
included in the hardware pack.
CR
R
1
2
11
AL
AR
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCRED72-BRU

STEP-10
17/24
1. Attach Back Panels GL , GR , G1 , G2 to back frame of TV using thirty one Phillips
Screws Round Head 6 into pre-drilled guide holes.
2. Use Phillips screwdriver to tighten screw. Do not over-tighten.
1. Attach Top B to Sides AL , AR , Small Divider O and Large Dividers DL , DR
using fifteen Allen Key Screws 1 (three screws on each Side, Divider).
2. Use Allen Key 2 to tighten. Do not over-tighten.
NOTE: The screwdriver is not
included in the hardware pack.
STEP-11
1
2
O
B1
2
6B
G2
G1
AL
AR
DL
DR
GL
GR
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front /
Avant
Front /
Avant
Warning Label
ASSEMBLY MODEL # AXCRED72-BRU

STEP-12
18/24
1. Attach Flip Down Door M to Middle Shelf N using two Hinges 13 and twelve
Phillips Screws 12 .
2. Attach Magnet Plates 7 to top corner of Middle Divider QL , QR using Phillips
Screws 5 into guide holes on Middle Divider QL , QR .
3. Attach Magnets 7 to Flip Down Door M using Phillips Screws 5 into guide holes
on Flip Down Door M .
4. Use a Phillips screwdriver to snugly tighten screw.
NOTE: The screwdriver is not
included in the hardware pack.
12
13 57
N
M
10
5
7
QR
QL
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
ASSEMBLY MODEL # AXCRED72-BRU

STEP-13
19/24
1. Attach hinges on Large Doors E to Sides AL , AR using Phillips Screws 4
into guide holes.
2. Attach hinges on Small Doors P to Large Dividers DL , DR using Phillips
Screws 4 into guide holes.
3. Use a Phillips screwdriver to snugly tighten screw.
4. Use Phillips screwdriver to attach Handle 8 to Large Doors E and
Small Doors P .
NOTE: The screwdriver is not
included in the hardware pack.
4
8
AL
AR
DL
DR
E
P
P
E
Front /
Avant
Front /
Avant
ASSEMBLY MODEL # AXCRED72-BRU

STEP-14
20/24
NOTE: The screwdriver is not
included in the hardware pack.
1. Attach Magnets Plates 7 to bottom corner of Large Doors E and
Small Doors P . using Phillips Screws 5 into guide holes on Large
Doors E and Small Doors P .
2. Attach Magnets 7 using Phillips Screws 5 into guide holes on Large
Dividers DL , DR and Middle Dividers QL , QR .
3. Use Phillips Screwdriver to snugly tighten screw.
7
5
5
7
QL
QR
DR
DL
E
P
E
P
ASSEMBLY MODEL # AXCRED72-BRU