Simpli Home Wyndenhall Brooklyn + Max EZRA AXCDS9EZ-G User manual

EZRA 9 PC DINING SET
MODEL # AXCDS9EZ-G
EZRA / HAWTHORNE / KENTVILLE

Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am –4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following information ready:
Model # Part Number or Letter
Purchased at Date of Purchase
If you wish to return the product, please contact the retailer where the
product was purchased.

IMPORTANT: Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
Identify all the parts and hardware. Do not discard of the packaging until
you have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and
pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
Requires 2 people for ease of assembly.
SAFETY INFORMATION
CARE and MAINTENANCE
Wipe regularly with clean water and a damp, clean, soft white cloth.
General cleaning can be done as needed with a mild detergent and
water solution. Always rinse with clean water and dry.
For heavy soiling, dampen a soft white cloth or soft bristle brush. Use
care as scrubbing can damage the surface.
More difficult stains can be treated, but this should be occasional, not
daily, cleaning. ANY cleaning solution used must be removed with clean
water and a clean white cloth. Cleaning residue left on the material can
cause it to dry out and crack, or affect the color.
DO NOT use any cleaners with corrosive ingredients (lye, acids or
ammonia).

CARE and MAINTENANCE …cont’d
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted or
breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in the
summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in your
home so it is constant. Dry indoor air can suck enough moisture from its surroundings to do
permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger, but lose moisture more slowly
than other finishes.
To help protect your wood furniture, take these steps:
•Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly. Don't over-humidify; that can damage wood by
causing it to expand and contract.
•Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
•If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3 to 4
inches away from the wall, giving the heat and air space to circulate.
•Dust with soft dry cloth.
•Do not use liquid or aerosol products.
•To avoid marking, do not place rubber on surface (foot pads, etc.)
•For soil build-up, wipe with damp cloth & dry.
•Do not use abrasive cleaners.

EASTWOOD / COLBURN / HALSTEAD
SQUARE DINING TABLE
MODEL # 3AXCDNT-002

DINING CHAIR
MODEL # AXCDCHR-003-G
EZRA / HAWTHORNE / KENTVILLE

PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
A
CHAIR BACK
QTY 1
SEAT
QTY 1
LEFT STRETCHER
QTY 1
B C
DEF
RIGHT STRETCHER
QTY 1
LEFT FRONT LEG
QTY 1
RIGHT FRONT LEG
QTY 1

PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
1
ALLEN KEY SCREW
M8 x 45 MM
QTY 1
ALLEN KEY SCREW
M8 x 60 MM
QTY 4
ALLEN KEY SCREW
M8 x 90 MM
QTY 4
ALLEN KEY
5 MM
QTY 1
FLAT WASHER
Ø22 MM
QTY 9
LOCK WASHER
Ø13 MM
QTY 9
23
456
7
SELF-TAPPING SCREW
Ø3.5 X 40 MM
QTY 4

ASSEMBLY
STEP 1
Align Seat (B) into pre-drilled holes on Chair Back (A).
Attach Seat (B) to Chair Back (A) using Allen Key Screw (1)
and one Washer each of (4) and (7).
Use Allen Key (6) tighten. Do not over-tighten.

ASSEMBLY
STEP 2
Attach Seat (B) to Chair Back (A) using Allen Key Screws (3)
and four Washers each of (4) and (7).
Use Allen Key (6) tighten. Do not over-tighten.

ASSEMBLY
STEP 3
Attach Front Legs (E & F) using Allen Key Screws (2) and four Washers
each of (4) and (7).
Use Allen Key (6) tighten. Do not over-tighten.
Align the Stretchers (C & D) into Chair Back (A) and Front Legs (E & F).
with Self-Tapping Screws (5).
Fully tighten Self-Tapping Screws (5).

ASSEMBLY
STEP 4
Place Chair on a flat level surface to ensure it is level.
If it is uneven, adjust either the Seat (B) or Front Legs (E) and (F).
Ensure the Chair is level and then fully tighten all bolts.

ASSEMBLY
STEP 5
Use the zipper to close the fabric on the bottom of the Chair.

WARRANTY
Thank you for purchasing a Simpli Home –Wyndenhall –Brooklyn + Max
product. These products have been made to demanding, high-quality
standards and are guaranteed for domestic use against manufacturing
faults for a period of 12 months from the date of purchase. This warranty
does not affect your statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.)
please contact us at our toll free service line at 1-866-518-0120 ext. 262
from 9 am to 4 pm, Monday to Friday, Eastern Standard Time or by email
at customerser[email protected].
We reserve the right to repair or replace the defective product, at our
discretion.
This product is guaranteed for 12 months if used for normal purposes. Any
warranty is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair by other than an authorized
agent. Heavy-duty or daily professional/commercial usage are not
guaranteed.
Due to continuous product improvement, we reserve the right to change
the product specifications without prior notice.