Simpli Home Wyndenhall Brooklyn + Max AXWSH004 User manual

WARM SHAKER / NORFOLK / LEXINGTON
TV MEDIA STAND
MODEL # AXWSH004
1/21
SI
M
P
I
I
H O M E
L I F E B Y D E S I G N

FOR REPLACEMENT PARTS OR HELP WITH
ASSEMBLY PLEASE CONTACT US AT:
simpli-home.com/customer-support
PLEASE ENSURE TO HAVE THE MODEL #
INSTRUCTION BOOKLETFROM THE PACKAGING OR
TO RETURN THE PRODUCT:
PLEASE CONTACT THE RETAILER
WHERE THE ITEM WAS PURCHASED FROM
2/21

Upload an image of our furniture
in your home with a short review
to our facebook page for a chance to
ENTER
TO WIN
Win up to $3000 of
Simpli Home furniture!!!
www.facebook.com/simplihomefurnishings
3/21
SI
M
P
I
I
H O M E
L I F E B Y D E S I G N

4/21
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CARE and MAINTENANCE
CAUTION: Injuries and damage can occur from furniture tip over if product is not
properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided
with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
To clean, use a soft or slightly damp cloth, then wipe with a clean, dry cloth.
Dust with soft dry cloth.
Do not use ammonia-based cleaning products, as they will damage the finish.
Do not leave liquids or damp cloths on this furniture.
To avoid dulling of the finish, do not place furniture in direct sunlight.
Please inspect and tighten all screws or bolts on a regular basis to ensure proper
performance and safety of your item.

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
MODEL # AXWSH004
A
PARTS DESCRIPTION
5/21
TOP
QTY 1
SIDES
QTY 1 PAIR
CENTRE SHELF
QTY 1
BOTTOM SUPPORT
QTY 1
SHELF SIDE
QTY 1 PAIR
DOOR
QTY 1 PAIR
BC
DEF
GHI
CENTRE DRAWER GLIDE
QTY 1
SHELF CABINET
QTY 2
DRAWER FRONT
QTY 2
SHELF
QTY 2
Front
Side
Front
Side
Back
Side
JKL
MNO P
BACK PANEL
QTY 1
BACK PANEL
QTY 1
BACK PANEL
QTY 2
DRAWER SIDE
QTY 2 PAIRS
DRAWER BACK
QTY 2
DRAWER BOTTOM
QTY 2
Front
Side Back
Side
Front
Side

PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
6/21
123
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
456
789
10 11 12
23
ALLEN KEY
QTY 1
CAM LOCK PIN
CAM LOCK
QTY 16 SETS
ALLEN KEY SCREW
M6 X 30 mm
QTY 32
a. M4 x 25mm - QTY 1
b. M4 x 15mm - QTY 1
c. M4 x 25mm - QTY 1
PHILLIPS SCREW
M4 X 15 mm
QTY 24
PHILLIPS SCREW
M3 X 15 mm
QTY 8
MAGNET AND PLATE
QTY 2 SETS
SHELF SUPPORT
QTY 24
HANDLE
M4 X 25 mm
QTY 4 SETS
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 31
WOOD DOWEL
Ø8 X 30 mm
QTY 4
ADJUSTABLE HINGE
QTY 4 SETS
FURNITURE ANTI-TIPPING
RESTRAINT
QTY 1 SET
MODEL # AXWSH004

COMPONENTS – KEY DIAGRAM
7/21
A
K
J
LBF
E
E
K
H
I
I
C
G
D
H
B
F
O
P
N
N
M
MODEL # AXWSH004

ASSEMBLY
STEP 1
8/21
1. Slide Drawer Bottom P firmly into slots on Drawer Sides N and Drawer Front M .
STEP 2
1. Attach 4 Cam Lock Pins 2 to back of Drawer Front M .
2. Align and insert Cam Lock Pins into pre-drilled holes on Drawer Sides N .
3. Insert 2 Cam Lock 2 into pre-drilled holes on each Drawer Side N .
4. Use flathead screwdriver to secure Cam Locks.
M
2
N
N
M
N
N
P
MODEL # AXWSH004

ASSEMBLY
STEP 3
9/21
STEP 4
1. Use Phillips Screwdriver to attach Handle 8 to Drawer Front M .
1. Align Drawer Back O with Drawer Bottom P and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each side.
3. Use Allen Key 3 to tighten. Do not over-tighten.
NOTE: The screwdriver is not
included in the hardware pack.
M
P
N
N
O
1
3
8
M
Repeat Step 1-4 for the second drawer.
MODEL # AXWSH004

ASSEMBLY
STEP 5
10/21
1. Attach three Cam Lock Pins 2 to one Side B using guide holes.
2. Align and insert Cam Lock Pins on Side B into pre-drilled holes on Bottom Shelf C .
3. Place three Cam Locks 2 into pre-drilled holes in Bottom Shelf C .
4. Using a flathead screwdriver tighten Cam Locks into Pins.
2
1. Attach Shelf Sides E to Bottom Shelf C using four Allen Key Screws 1 through
pre-drilled holes.
2. Use Allen Key 3 to tighten. Do not over-tighten.
STEP 6
C
B
3
C
E
E
1
MODEL # AXWSH004

ASSEMBLY
11/21
STEP 7
1. Attach two Cam Lock Pins 2 to bottom of Bottom Shelf C using guide holes in centre.
2. Align and insert pins into Centre Drawer Glide G .
3. Insert two Cam Locks 2 into pre-drilled holes on Centre Drawer Glide G .
4. Using a flathead screwdriver tighten Cam Locks into Pins.
1. To attach Opposite Side B to Bottom Shelf C , repeat steps 1 - 4 in Step 6.
STEP 8
C
B
2
C
G
G
2
MODEL # AXWSH004

ASSEMBLY
STEP 9
12/21
1. Attach Bottom Support D to Sides B and Centre Drawer Glide G using Allen Key
Screws 1 through pre-drilled holes.
2. Use Allen Key 3 to tighten. Do not over-tighten.
D
G
B
B
1
3
1
3
MODEL # AXWSH004

ASSEMBLY
STEP 10
13/21
1. Insert two Dowels 11 into top corners of each Side B .
2. Use rubber mallet to tap Dowels 11 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align pre-drilled holes on bottom corners of Top A with Dowels 11 in Sides B .
4. Insert Dowels into top.
5. Using Allen Key Screws 1 attach Top A to Sides B and to Shelf Sides E .
A
B
B
E
E
1
3
11
1
3
MODEL # AXWSH004

ASSEMBLY
STEP 11
14/21
F
12
4
12
4
1. Attach Adjustable Hinges 12 to Doors F using Phillips Screws 4 into guide holes
on Doors F .
2. Attach Adjustable Hinges on Doors F to Sides B using Phillips Screws 4 into guide
holes on Sides B .
3. Use a Phillips screwdriver to tighten screws. Do not over-tighten.
F
F
A
B
B
MODEL # AXWSH004

ASSEMBLY
15/21
IMPORTANT NOTE:
II
I
4
Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so
that all the spaces between the door and the unit sides are equal. To adjust, follow
instructions:
1. Side adjustment 4 mm
To move the door towards the side panel, loosen screw I and tighten screw II .
To move the door away from the side panel, loosen screw II and tighten screw I .
2. Depth adjustment 4 mm
Loosen screw II ( just one turn ), adjust door to desired position, re-tighten screw .
3. Height adjustment
Loosen screw 4 , adjust door to desired position, re-tighten screw .
MODEL # AXWSH004

ASSEMBLY
STEP 12
16/21
1. Attach Magnet Plates 6 to bottom corner of Doors F using Phillips Screws 5
into guide holes on Doors F .
2. Attach Magnet 6 using Phillips Screws 5 into guide holes on Centre Shelf C .
3. Use a Phillips screwdriver to attach Handles 8 to Doors F .
A
B
B
E
F
F
C
8
5
6
5
6
MODEL # AXWSH004

ASSEMBLY
STEP 13
17/21
1. Using Phillips Round Head Screws 9 attach Back Panels J K L to back of TV Stand.
STEP 14
1. Use Shelf Supports 7 for each Shelf H or I in desired location.
2. Two Shelf Supports 7 may be used on back top of each Shelf H or I as a tipping
restraint.
9
K
J
K
L
7
H
I
I
H
MODEL # AXWSH004

18/21
STEP 15
10
10
NOTE: The screwdriver is not
included in the hardware pack.
FURNITURE ANTI-TIPPING RESTRAINT ASSEMBLY
NOTE: Injuries and damage can occur from furniture tip-over. It is
important to use the safety bracket included. If the tipping restraint kit is
not in the box, please contact our customer service department in order
to obtain another kit before using the furniture.

19/21
FURNITURE ANTI-TIPPING RESTRAINT ASSEMBLY
1. Attach one of the mounting brackets securely to the back edge of
the furniture. Use the shorter screw.
2. Determine where furniture is to be placed and mark location on
the wall for mounting bracket screw hole approximately 2 inches
below the bracket mounted to the furniture.
3. Drill a 3/16 inch hole in the wall. Press the plastic anchor into the
hole and gently tap until the flange on the anchor is against the
wall surface.
4. Position the bracket over the anchor and use the longer screw to
securely attach the bracket to the wall.
5. Place the furniture so the back edge is in line with the bracket on
the wall.
6. Lace an end of the nylon restraint down through each bracket.
Bring both ends together and slide the beaded end of the strap
through the keyhole shaped slot in the other end until snug. Pull
down on the beaded end until it snap locks into the keyhole slot.
7. To double lock, return the beaded end back through the keyhole as
shown.
8. Check to make sure the strap is securely laced and locked to the
brackets.
● DO NOT place heavy objects in top drawers
● DO NOT let children climb or hang on drawers, doors or shelves
Furniture Anti-Tipping Restraint Instructions:

WARRANTY
Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max
product. These products have been made to demanding, high-quality
standards and are guaranteed for domestic use against manufacturing
faults for a period of 12 months from the date of purchase. This warranty
does not affect your statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.)
please contact us at our toll free service line at 1-866-518-0120 ext. 262
from 9 am to 4 pm, Monday to Friday, Eastern Standard Time or by email at
simpli-home.com/customer-support.
We reserve the right to repair or replace the defective product, at its
discretion.
This product is guaranteed for 12 months if used for normal purposes.
Any warranty is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair by other than an authorized
agent. Heavy-duty or daily professional/commercial usage are not
guaranteed.
Due to continuous product improvement, we reserve the right to change
the product specifications without prior notice.
20/21
SI
M
P
I
I
H O M E
L I F E B Y D E S I G N