Courtyard Creations TGS17FS-WM User manual

PAGE 1 OF 2
COURTYARD CREATIONS INC.
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
ASSEMBLY INSTRUCTIONS
TGS17FS-WM
PARTS LIST
PART
NO. MATERIAL CODE Q’TYPART
1
2
3
4
1
1
1
4
3
2
TGS17FS-CS05-1
TGS17FS-CS04-7
TGS17FS-CS04-8
17C17A0403001Y4
TABLE TOP
LEG FRAME
LEG FRAME
SCREW ST4.2*12
FIGURE 1
Step 1:
Insert the leg frame (#3) into the center gap of leg
frame (#2). See Figure 1.
STOP DON’T RETURN TO STORE!
You will need the following tools:
- Phillips Screwdriver (Not Included)
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]

11
32 3 2
4
PAGE 2 OF 2
FIGURE 2 FIGURE 3
FIGURE 4
Step 2:
Place the table top (#1) onto a non-abrasive
surface, such as carpet, with its underside facing
upwards. Place the legs (#2 and #3) into the
plastic holders on the table top (#1) rim.
See Figure 2.
Step 4:
Turn the table to its upright position.
See Figure 4.
Step 3:
Fasten the legs (#2 and #3) to the plastic holders
on the table top (#1) rim by using screws (#4).
See Figure 3.
Call Toll Free
TEL: [phone]
FAX: [phone]
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
STOP DON’T RETURN TO STORE!
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANYDIFFICULTYDURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THESTORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
Cleaning and Maintenance
• Wash frame parts with mild soap and water,
rinse thoroughly, and dry frame completely. Do
not use bleach, acid, or other solvents on the
frame parts.
• Wash glass with mild soap and water, rinse
thoroughly, and dry glass completely.
•
Please inspect and tighten all bolts and fasteners
on a regular nasis to ensure proper performance
and
safety of your table.
• When moving the table, do not drag.
• We recommend the use of furniture covers when
not in use.
• In order to prolong the life and beauty of your
table, we recommend it be stored in a dry and
protected area during off season periods.