Simpli Home Lowry User manual

Lowry / Mitchell / Fulton
42 inch TV Media Stand
Model # AXCLRY42-DCB
TM
TM
1

2
It's time to register your product warranty.
It's quick and easy. And you'll be happy you did.
simpli-home.com/product-registration
Great quality is a right.
Thank you for shopping with Simpli Home,
America's top brand for high-value furniture.
Activate your 1-year warranty
Automatic entry to win a $500 gift certificate
Earn instant rewards and save
ü
ü
ü

3
Review your product and collect rewards!
Thank you for your purchase! We hope you enjoy it. We’d love
your feedback. Please share a review and get instant rewards!
simpli-home.com/product-review
Share photos and get your cash back!
Send us images or share them on social and qualify for instant
rewards. You may even receive store credit on your entire purchase!
simpli-home.com/share-images

4
For Fastest Customer Service:
1. Open your phone’s camera.
2. Point your phone’s camera at the QR code to scan.
3. Click on the pop up.
4. You’ll be taken to our customer service page.
5. Fill the form with your order information and issue.
6. Submit form.
7. A customer service associate will contact you.
Other ways to contact us…
Visit Us
Visit our site directly at
www.simpli-home.com
Email Us
[email protected]
Call Us
1-866-518-0120
Monday to Friday
9am to 5pm EST
*If you’ve purchased from a retailer and you wish to return the product, please
contact the retailer directly.

CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
Safety Information
IMPORTANT : Please read this manual carefully before beginning assembly
of this product. Keep this manual for future reference.
5

This furniture is designed for indoor use.
Damage to furniture can come from temperature changes in relative humidity (RH)
in our homes. Humid air oxidizes metal which results in rusting, corrosion, tarnishing
and roughness. Wood absorbs water as relative humidity rises and falls, and in doing
so it swells and shrinks.
To protect against the humidity effect, the metal is powder coated. The powder coat
layer protects the metal from oxidizing, corrosion, tarnishing and scratching and
keeps it looking good for years to come. The wood is sealed and lacquered to
protect against humidity.
To help protect your furniture, follow these steps:
·Use a humidifier, preferably one with an automatic control system that can
sense the humidity level and adjust itself accordingly
·Dust with soft dry cloth
·Wipe up spills promptly
·Clean with a dry cloth
·Do not use abrasive cleaners, chemical solvents, strong detergents, cleaners
with bleach, and furniture polish
·Use soft felt base coasters, placemats to help prevent scratches
·Keep furniture out of direct sunlight, which can cause cracking or roughness
on the protective layer
·If it can be avoided, do not put furniture near heating vents
·Keep the furniture 3 to 4 inches away from the wall, giving heat and air space to
circulate.
Care & Maintenance
6

WARNING Do not place toys, food, etc. on the top shelves or upper drawers.
Serious injury or death may occur when children climb on furniture. A remote
control or items placed on the furniture may encourage a child to climb on the
furniture and as a result make it top-heavy and cause it to tip over on the child.
WARNING Do not place a TV that exceeds the weight limits or size guidelines
shown in the instructions specified for the furniture. Do not overload shelves
or place heavy items on top shelves or drawers.
Improper use of furniture to support TVs may result in serious injury or death.
WARNING Do not relocate audio and/or video equipment to furniture not
specifically designed to support audio and/or video equipment. Do not move
furniture without shelves or drawers unloaded. Furniture can collapse or tip
over onto a child and cause physical injury or death.
This TV Stand does not come with legible instructions pertaining to the risk of
fire and electric shock that is associated with the use of electrical components
such as operation, user-maintenance, loading, storage and as applicable
electrical issues including grounding or double-insulation.
Any use of this item other than that recommended by the manufacturer in this
manual may cause fire, burns, electric shock and/or serious injuries or death.
WARNING
The maximum diagonal CRT television screen size is 25 inch to 27 inch (63.50 cm to
68.58 cm). For use with televisions weighing 150 lbs or less. Using larger or heavier
televisions may cause instability or tip over which can lead to serious injury or even
death.
The recommended maximum width of the television intended for use is 50 inch
(127 cm).
MAXIMUM LOAD 150 LBS MAXIMUM LOAD 25 LBS
7

.A
TOP
QTY 1 LEFT SIDE
QTY 1 RIGHT SIDE QTY 1
BOTTOM SHELF
QTY 1
.C
MIDDLE SHELF
QTY 1
.D.E
DIVIDER
QTY 1
LEFT DOOR
QTY 1
.F.GL
.BL .BR
.GR
SHELF
QTY 2 RIGHT DOOR
QTY 1
.H
BOTTOM BACK PANEL
QTY 1
TOP BACK PANEL
QTY 1 LEG
QTY 2
.I.J
Front /
Avant
Warning Label
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Part Description
8
Model # AXCLRY42-DCBPre-Assembly Information

.1
.9.11
.3
.5.7
.2.4
.8 .6
.10 .12
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
ALLEN KEY
QTY 1
ALLEN KEY SCREW
M6 X 30mm
QTY 24
PHILLIPS SCREW
ROUND HEAD
M4 X 15mm
QTY 27
WOOD DOWEL
Ø8 X 30mm
QTY 14
SHELF SUPPORT
QTY 12
MAGNET AND PLATE
QTY 2 SETS
PHILLIPS SCREW
M3 X 15mm
QTY 8
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25mm - QTY 2
( 1 is extra )
b. M4 X 15mm - QTY 1
c. M4 X 25mm - QTY 1
ALLEN KEY BOLT
M8 x 20 mm
QTY 12
LOCK WASHER
Ø12 / Ø8 x 1.5 mm
QTY 12
WASHER
Ø19 / Ø8 x 1 mm
QTY 12
ADJUSTABLE HINGE
QTY 4 SETS
PHILLIPS SCREW
M4 X 15mm
QTY 24
.13
Hardware Description
9
Model # AXCLRY42-DCBPre-Assembly Information

BL
A
BR
D
E
GL
GR
I
H
C
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
F
F
J
J
10
Model # AXCLRY42-DCBComponents - Key Diagram

Step 1
1. Insert two Dowels 2 into drilled holes on Divider E .
2. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Insert four Dowels 2 into drilled holes on Middle Shelf D .
4. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
E
E
D
D
2
2
2
2
2
11
Model # AXCLRY42-DCBAssembly

Step 2
BL
2
2
2
1. Insert four Dowels 2 into drilled holes on Bottom Shelf C .
2. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
2
C
C
BL BR
2
1. Insert two Dowels 2 into drilled holes on each Left Side BL and Right Side BR .
2. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
Front /
Avant
Front /
Avant
12
Model # AXCLRY42-DCBAssembly

Step 3
C
E
Front /
Avant
Front /Avant
Front /Avant
Front /Avant
E
C
1. Align Wood Dowels with guide holes on Bottom Shelf C
and attach Divider E to Bottom Shelf C .
Front /Avant
1
12
1
2. Use three Allen Key Screws 1 to attach Divider E through guide holes.
3. Use Allen Key 12 to tighten Screws. Do not over-tighten.
13
Model # AXCLRY42-DCBAssembly

Step 4
D
C
E
Front /
Avant
Front /Avant
Front /
Avant
D
C
E
Front /Avant
Front /Avant
Front /
Avant
1
12
1
1. Use three Allen Key Screws 1 to attach Middle Shelf D through guide holes.
2. Use Allen Key 12 to tighten Screws. Do not over-tighten.
14
Model # AXCLRY42-DCBAssembly

Step 5
C
D
E
BL
Front /Avant
Front /
Avant
Front /Avant
Front /Avant
1. Align Wood Dowels with guide holes on
Left Side BL and attach Middle Shelf D
and Bottom Shelf C to Left Side BL .
1
1
D
C
BL
Front /Avant
Front /Avant
Front /Avant
Front /Avant
1
12
2. Use three Allen Key Screws 1 to attach each part C , D through guide holes.
3. Use Allen Key 12 to tighten Screws. Do not over-tighten.
15
Model # AXCLRY42-DCBAssembly

Step 6
1
12
1
1
BL
D
C
BR
Front /Avant
Front /Avant
Front /Avant
Front /Avant
Front /Avant
BL
C
D
BR
Front /
Avant
Front /Avant
Front /
Avant
Front /Avant
Front /Avant
1. Repeat Step 5 for Right Side BR .
16
Model # AXCLRY42-DCBAssembly

Step 7
A
C
BR
BL
Front /Avant
Front /Avant
Front /Avant
Front /Avant
1. Align Wood Dowels with guide holes on Top A
and attach parts BL , BR to Top A .
2. Use three Allen Key Screws 1 to attach each part BL , BR through guide holes.
3. Use Allen Key 12 to tighten Screws and Bolts. Do not over-tighten.
1
12
1
1
A
BL
BR
C
Front /Avant
Front /Avant
Front /
Avant
17
Model # AXCLRY42-DCBAssembly

Step 8
P
X
12
9
10
11
J
J
C
1. Attach Legs J to Bottom Shelf C .
2. Use twelve Allen Key Bolts 9 , twelve Lock Washers 10 and twelve Washers 11
to secure part J and C (six Blots, six Lock Washers and six Washers on each Leg).
3. Use Allen Key 12 to tighten Bolts. Do not over-tighten.
18
Model # AXCLRY42-DCBAssembly

Step 9
Front /
Avant
Front /
Avant
Note:
The back of the tv frame does not have pre-drilled holes to attach the back panels.
Warning Label
A
H
3
H
I
Front /
Avant
Front /
Avant
A
3
1. Attach the Back Panels H , I to back frame
using Phillips Screws Round Head 3 through guide holes.
2. Use Phillips Screwdriver to tighten screws. Do not over-tighten.
19
Model # AXCLRY42-DCBAssembly

Step 10
6
7
GL GR
1. Attach Adjustable Hinges 6 to Doors GL , GR using
Phillips Screws 7 into guide holes on Doors GL , GR .
2. Attach Adjustable Hinges 6 on Doors GL , GR to Sides BL , BR using Phillips
Screws 7 into guide holes on Sides BL , BR .
3. Attach Magnets 4 using Phillips Screws 5 into guide holes on Divider E .
4. Attach Magnet Plates 4 to top corner of Doors GL , GR using Phillips Screws 5 into
pre-drilled holes on Doors GL , GR .
5. Use Phillips screwdriver to snugly tighten screw.
5
5
5
4
6
7
GL
GR
BR
BL
GL
GR
E
20
Model # AXCLRY42-DCBAssembly