Simpli Home AXCHOL005-72-NAB User manual

ARTISAN HOLDEN STRATFORD//
72 INCH TV STAND
MODEL # AXCHOL005-72-NAB
1/22

FOR REPLACEMENT PARTS OR HELP WITH
ASSEMBLY PLEASE CONTACT US AT:
simpli home.com/customer-support-
PLEASE ENSURE TO HAVE THE MODEL #
INSTRUCTION BOOKLETFROM THE PACKAGING OR
TO RETURN THE PRODUCT:
PLEASE CONTACT THE RETAILER
WHERE THE ITEM WAS PURCHASED FROM
2/22

Upload an image of our furniture
in your home with a short review
to our facebook page for a chance to
ENTER
TO WIN
up to $3000 ofWin
Simpli Home furniture!!!
www.facebook.com/simplihomefurnishings
3/22

IMPORTANT : Please read this manual carefully before beginning
.assembly of this product Keep this manual for future reference.
SAFETY INFORMATION
CARE and MAINTENANCE
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by children
and pets. Keep children and pets away during assembly. To avoid danger of
suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
To clean, use a soft or slightly damp cloth, then wipe with a clean, dry cloth.
Dust with soft dry cloth.
Do not use ammonia-based cleaning products, as they will damage the finish.
Do not leave liquids or damp cloths on this furniture.
To avoid dulling of the finish, do not place furniture in direct sunlight.
Please inspect and tighten all screws or bolts on a regular basis to ensure proper
performance and safety of your item.
4/22

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE ASSEMBLY INFORMATION-
A
PARTS DESCRIPTION
TOP
QTY 1
DIVIDER
QTY 1 PAIR
CENTER SHELF
QTY 1
DOOR
QTY 1 PAIR
SIDE
QTY 1 PAIR
TOP DIVIDER
QTY 1
DOOR
QTY 1 PAIR
BACK PANEL
QTY 1 SET
MIDDLE DIVIDER
QTY 1 PAIR
SHELF
QTY 2
TOP SHELF
QTY 1
BOTTOM SHELF
QTY 1
B C
D
G
J
E
H
K
F
I
L
Front
Side
Back
Side
MODEL # AXCHOL005-72-NAB
5/22
Front
Side
Back
Side
Front
Side
Back
Side

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE ASSEMBLY INFORMATION-
M
PARTS DESCRIPTION
N O
P Q R
BOTTOM SUPPORT LEG
QTY 2
DRAWER SIDE
QTY 1 PAIR
DRAWER FRONT
QTY 1
DRAWER BOTTOM
QTY 1
FLIP DOWN DOOR
QTY 1
DRAWER BACK
QTY 1
6/22
MODEL # AXCHOL005-72-NAB

1
PRE ASSEMBLY INFORMATION-
HARDWARE DESCRIPTION
243
56
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
8
7
9
13
10 12
11
ALLEN KEY SCREW
M6 X 30 mm
QTY 43
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 39
PHILLIPS SCREW
M3 X 12 mm
QTY 24
M4 X 25 - QTY 1
HANDLE
M4 X 25mm
QTY 6 SETS
PHILLIPS SCREW
M4 X 30 mm
QTY 8
PHILLIPS SCREW
M4 X 15 mm
QTY 6
ALLEN KEY
QTY 1
SHELF SUPPORT
QTY 12
LATCH
QTY 1 SET
CAM LOCK PIN
CAM LOCK
QTY 19 SETS
MAGNET AND PLATE
QTY 4 SETS
PHILLIPS SCREW
M3 X 15 mm
QTY 20
a.
b.
c.
M4 X 15 - QTY 1
M4 X 25 - QTY 1
TIPPING RESTRAINT
QTY 1 SET
7/22
Required -
Flathead screwdriver
Phillips screwdriver
Not Included
MODEL # AXCHOL005-72-NAB

COMPONENTS – KEY DIAGRAM
K
J
O
P
L
G
G
A
D
E
PR
O
8/22
MODEL # AXCHOL005-72-NAB

ASSEMBLY
P
P
O
2
2
2
2
2
2
2
O
RP
P
1. Attach 4 Cam Lock Pins 2 to back of Drawer Front O .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides P .
3. Insert 2 Cam Locks 2 into pre-drilled holes on each Drawer Side P .
4. Use flathead screwdriver secure Cam Locks.
1. Slide Drawer Bottom R firmly into slots on Drawer Sides P and Drawer Front O .
STEP 1
STEP 2
9/22
MODEL # AXCHOL005-72-NAB

ASSEMBLY
1
3O
Q
1. Align Drawer Back Q with Drawer Bottom R and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each Side P .
3. Use Allen Key 3 to tighten screws. Do not over-tighten.
1. Use Phillips screwdriver to attach Handle 4 to Drawer Front O .
STEP 3
STEP 4
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # AXCHOL005-72-NAB
10/22

ASSEMBLY
STEP 5
1. Attach Centre Shelf I to each Middle Divider G using 3 Allen Key Screws 1 .
2. Use Allen Key 3 to tighten screws. Do not over-tighten.
11/22
MODEL # AXCHOL005-72-NAB

ASSEMBLY
STEP 6
1. Attach 6 Cam Lock Pins 2 into pre-drilled holes on the bottom of Top Shelf C .
2. Align Cam Lock Pins with pre-drilled holes on Middle Divider G .
3. Insert 3 Cam Lock 2 into pre-drilled holes on each Middle Divider G .
4. Use flathead screwdriver to secure Cam Lock .
5. Attach Top Divider H to Top Shelf C using 3 Allen Key Screws 1 .
12/22
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # AXCHOL005-72-NAB

ASSEMBLY
STEP 7
1. Attach Top Shelf C to each Divider F using 3 Allen Key Screws 1 .
2. Use Allen Key 3 to tighten screws. Do not over-tighten.
13/22
MODEL # AXCHOL005-72-NAB

ASSEMBLY
STEP 8
1. Attach Bottom Shelf B to Dividers F & G using 12 Allen Key Screws 1
(3 Allen Key Screws / each Divider ).
2. Use Allen Key 3 to tighten screws. Do not over-tighten.
14/22
MODEL # AXCHOL005-72-NAB

ASSEMBLY
STEP 9
1. Attach 3 Cam Lock Pins 2 to each Side E .
2. Align Cam Lock Pins with pre-drilled holes and attach Bottom Shelf B .
3. Insert 6 Cam Lock 2 into pre-drilled holes on Bottom Shelf B .
4. Use flathead screwdriver to secure Cam Lock .
5. Attach 2 Bottom Support Legs M to Bottom Shelf B using 8 Phillip Screws 8 .
15/22
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # AXCHOL005-72-NAB

ASSEMBLY
STEP 10
1. Attach 3 Cam Lock Pins 2 into pre-drilled holes on bottom of Top A ( at center ).
2. Align Cam Lock Pins with pre-drilled holes on Top Divider H .
3. Insert 3 Cam Locks 2 into pre-drilled holes on Top Divider H .
4. Use flathead screwdriver to secure Cam Lock .
5. Attach 2 Sides E and 2 Dividers F to bottom of Top A using 12 Allen Key Screws 1
( 3 Allen Key Screws/ each part ).
16/22
MODEL # AXCHOL005-72-NAB

ASSEMBLY
STEP 11
1. Attach Back Panels D to back of cabinet using Phillips Screws Round Head 5 into
pre-drilled guide holes.
2. Use Phillips screwdriver to tighten screws.
17/22
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # AXCHOL005-72-NAB

ASSEMBLY
STEP 12
1. Attach hinges on Doors K to Sides E using Phillips Screw 9 into guide holes.
2. Attach hinges on Doors L to Divider F using Phillips Screw 9 into guide holes.
3. Attach hinges on Center Shelf I to Flip Down Door N using Phillips Screw 12 .
4. Attach 4 Magnet Plates 6 to bottom corner of Door K and Door L using Phillip
Screw 10 into guide holes.
5. Attach 4 Magnets 6 using Phillip Screw 10 into guide holes on Bottom shelf B .
6. Attach Latch 11 to Divider G and Flip Down Door N using Phillip Screw 10 into guide
holes.
7. Use a Phillips screwdriver to attach Handles 4 to Doors K , L & Flip Down Door N
through pre-drilled holes.
B
18/22
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # AXCHOL005-72-NAB

ASSEMBLY
STEP 13
1.Use 4 Shelf Supports 7 for each Shelf J in desired location .
2. 2 Shelf Supports 7 may be used on back top of each Shelf J as a tipping restraint.
NOTE: Injuries and damage can occur from furniture tip-over. It is important to use the
safety bracket included. If the tipping restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the furniture.
19/22
13
STEP 14
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # AXCHOL005-72-NAB

ASSEMBLY
STEP 15
13
20/22
NOTE: The screwdriver is not
included in the hardware pack.
1. To attach Tipping Restraint 13 , follow instructions on Tipping Restraint package.
When you determined the location for your unit, install the Furniture Tipping
restraint. Carefully follow the instructions contained on the package.
MODEL # AXCHOL005-72-NAB