Unicol Powalift User manual

UNICOL Deutschland GmbH
Willi-Grasser-Straße 15
D-91056 Erlangen
Tel : [phone]
Fax : [phone]
Web: www.unicol.de Powalift® instructions for training use only.
UNICOL Deutschland GmbH Training Department.
Base unit with braked wheels. Telescopic mast unit with motor and protective housing.
Step 1. Carefully join the telescopic mast to the braked base unit.
Step 2. Lower column adapter onto the columns
Tipp. Apply brakes to prevent base movement.
Note direction of mount with coupling facing downwards.

UNICOL Deutschland GmbH
Willi-Grasser-Straße 15
D-91056 Erlangen
Tel : [phone]
Fax : [phone]
Web: www.unicol.de Powalift® instructions for training use only.
UNICOL Deutschland GmbH Training Department.
Step 3. Insert coupling bolt into telescopic leadscrew head and ensure that it is not overtightened.
Assembly shown in lowered position.

UNICOL Deutschland GmbH
Willi-Grasser-Straße 15
D-91056 Erlangen
Tel : [phone]
Fax : [phone]
Web: www.unicol.de Powalift® instructions for training use only.
UNICOL Deutschland GmbH Training Department.
Step 4. connect 24V DC power jackplug and mount power supply assembly onto the rear of mast unit.
DC Power unit housing with 240V power cable inserted

UNICOL Deutschland GmbH
Willi-Grasser-Straße 15
D-91056 Erlangen
Tel : [phone]
Fax : [phone]
Web: www.unicol.de Powalift® instructions for training use only.
UNICOL Deutschland GmbH Training Department.
Step 5. Join flatscreen adapterplate to column adapter using the x4 M10x20 bolts supplied.
Mount flatscreen to to flatscreen mount for completed assembly.
Note; Image shown with optional equipment platform. Part#VCM

UNICOL Deutschland GmbH
Willi-Grasser-Straße 15
D-91056 Erlangen
Tel : [phone]
Fax : [phone]
Web: www.unicol.de Powalift® instructions for training use only.
UNICOL Deutschland GmbH Training Department.
Step 6. The remote control has only x2 basic functions, up & down operation of the leadscrew / flatscreen assembly.
serie 1 remote control unit shown. Red button .
. has no function.
Triangle button should be pressed to raise the flatscreen
assembly to the required height.
Round button should be pressed in order to lower the
flatscreen to the required height.
Tipp. Replace battery of remote control unit if operation
. fails.