SingTel GPON ONR User manual

Quick Installation Guide
for GPON Optical
Network Router

Technical Specifications
 Power supply: 12 V DC, 2 A
 Power adapter input: 100 - 240 V AC, 50 - 60 Hz
 System power supply: See the nameplate on the device
 Ambient temperature: 0ºC to +40ºC
 Ambient humidity: 5% - 95% RH (non-condensing)
 Weight: < 400 g
 System power consumption: ≤ 24 W

Product Overview
Product
Feature
GPON Optical
Network Router
(ONR)
 4 Ethernet ports
 2 POTS ports
 1 USB 2.0 port

1
1. What's in the box?
Name How it looks like
GPON ONR
Cat5e cable
Power
adapter
Phone cable

Quick
installation
guide
2
2. Suggested Placement of ONR
Do not install GPON ONR outdoors or in cabinets which may be
exposed to sun and rain.
GPON ONR should be horizontally placed at an open
area, such as on your work desk. Ports at the back of
GPON ONR should be unobstructed.

3

3. Connecting Cables and Devices to
GPON ONR
1 Power port 5 USB port
2 Two telephone ports 6 Reset button
3 Four ethernet ports+10G port 7
Power on/off
4 Fibre port

Step 1: Follow instructions below to perform fibre patching.
As fibre optic cables are made of glass, please do not bend sharply
and ensure the bending diameter is larger than 60 mm.
Step 2: Connect Cat5e cable (Blue) from the Ethernet port
of your device to a LAN port.
Step 3: Connect phone cable (grey) from your phone to
the assigned TEL port.
Step 4: If you have a USB data cable, connect it from the
USB port to your USB device (optional).

Step 5: Connect the power adapter to GPON ONR's
POWER port and your home electrical outlet. The
POWER indicator on the GPON ONR should be
green.
5

4. Configuring the GPON ONR
4.1 Logging in to the webpage for configuration
Step 1: Connect your PC to the GPON ONR through the
Ethernet port.
Step 2: Ensure your PC is in dynamic IP address mode.
Step 3: Enter http://192.168.1.254 in the address bar of
Internet Explorer and press Enter.
When login window is displayed,
- Enter the user name (root by default)
- Enter the password (print in the label)
Step 4: Click Login.
-Your session will automatically timeout after 5 minutes of inactivity
and you will be required to login again.
-Replace your default password with a personal one to avoid
unauthorised access.

4.2 Configuring the FTTH ID
Step 1: Choose Internet (header third tab) > PON
Information (on the left pane) > SN (second tab)
Step 2: Input the FTTH ID (Use FTTH ID provided
by Singtel).
Step 3: Click Apply. The GPON ONR will automatically
reboot.
For how to verify the service, refer to chapter 5.

5. Verifying Successfulness of Connection
� LED indicators on the GPON ONR provide status
information of each service connection. Each light mode
indicates the successfulness of the connection listed in
chapter 3 & 4:
• Fibre connection is up if PON indicator is steady
green.
• Each of these services are functioning normally if LAN/
Internet/IPTV/TEL indicators are steady green.
� If the PON indicator is blinking, check your fibre
connection as stated in chapter 3, and FTTH ID
configuration in chapter 4.

6. Resetting Factory Defaults
� What does it do?
To reset all the settings except the FTTH ID.
� How to reset?
Press Reset button by using a needle-like object and
hold for more than 10 seconds. If LED indicator turns
off and on, your ONR has been successfully restored to
factory defaults.

7. Indicator Description
Indicator Status LED Description
Steady green The ONR is powered on.
Off The power supply is cut off.
POWER
Blinking red The ONR is upgrading.
Steady red Hardware self-check failed or failed to start.
Steady green Fibre connection is up.
Off Fibre connection is down.
PON
Blinking twice a
Fibre connection set up in progress.
second
Steady red
Optical signals are abnormal, please reconnect the fibre port,
please connect service provider if the problem is no resolved.
Steady on Corresponding voice service is up.
TEL1–TEL2 Blinking Voice service is up and the phone is off-hook or ringing.

Off Voice service is down or not available.
LAN1–
Steady on Ethernet connection is in the normal state.
Blinking Data is being transmitted on the Ethernet port.
LAN4
Off Ethernet connection is not set up.
Steady on Internet service is OK.
INTERNET Blinking Internet data is being transmitted.
Off Internet service is down.
Steady green IPTV WAN IP address and STB detected OK.
IPTV Blinking
No IP address obtained in IPTV interface and STB detected
OK.
Off No STB detected.
10