Sinoamigo SPT-1 Series User manual

Features and Applications
Use and Maintenance
Installation Method
Please read this manual carefully before installation!
安 全 注 意 事 项
1
2
3
Remove the fixed plastic ring by rotating it counter-
clockwise direction.
Put the product into the hole and adjust the direction of
the function sockets.
From the bottom of the table, insert the plug through the
fixed plastic ring, and tighten the plastic ring by clockwise
until the socket is fixed.
4
Open the hole with a drill on the table top.
(Installation details see the back)
155mm
121mm
SPT-1 Series Vertical Pop Up Socket
Table top
Switch Cover
Socket
Locking tab
Fixed plastic ring
Fixed block
Plug
Safty Warning
User Manual
3, Avo id th e a ci di c an d a lka li n e so lv ent
washing.avoid scratching or bruising the surface
of the transparent protective paint covered,to
ensure the product's own corrosion resistance.
2. When not in use, pushing the locking tab in
(the direction of the arrow), to allow the socket
body to fall slowly till close to table top. then
press the cover with the palm of your hand to
lock the socket body fully.
1. When using a desktop socket, press down the
cover with the palm of your hand, and when the
cover pops up, pull the socket body upwards until
the locking tab fixed.
1. Make sure ground system is reliable when using.
2.Do not overload, otheriwse it may cause fire.
3.Avoid using wet hands to plug sockets.
4. Please insert the power plug into the sockets
fully when using, to avoid the risk of electric
leakge and electric shock.
1. 1.Desktop sockets are widely used in modern
bu ild in gs ,o ff ic e b ui ld in gs, e xh ib ti on ha ll s ,
airports, banks, postal and telecom munications,
laboratory buildings, schools, hotels, hospitals,
computer rooms, home decora-tion, and other
places for access to power or weak electricity(such
as:Telephones,compyters,microphones,etc.)used
to transmit signals;
3.The product’s sealed structure can ensure that
water droplets, beverages and other liquids do not
penetrate easily.
2.When the product is not in use, the socket body
can be com-pletely hided under desktop and keep
clean;

SPT-1 Series Vertical Pop Up Socket
Φ95
Product installation details
3. Place the product into the hole and adjust the
direction of the function sockets.(see pic 3)
2. Remove the fixed plastic ring as per the
direction of the arrow-by (see counterclockwise
pic 2).
1. Use a drill to open a hole with a Φ opening on 95
the desktop.(see pic 1)
4. Tighten the fixed plastic ring as per the direction of the
arrow- .(see pic 4)by clockwise
(Pic 4)(Pic 3)(Pic 2)(Pic 1)
Table top
Table top
Drill/Hole opener
Opening hole
User Manual