5
SAFETY INSTRUCTIONS….cont
PROTECT YOURSELF FROM ELECTRIC SHOCK: When working with the SMD led floodlight,
avoid contact with any earthed items (e.g. pipes, radiators, hobs and refrigerators,
etc.). It is advisable (when charging) wherever possible to use an RCD (residual current
device) at the mains socket.
STAY ALERT: Always watch what you are doing and use common sense. Do not oper-
ate the SMD led floodlight when you are tired or under the influence of alcohol or
drugs.
DISCONNECT THE SMD LED FLOODLIGHT FROM THE MAINS SUPPLY: When not in use,
before servicing or cleaning etc.
DO NOT ABUSE THE LEAD: Never attempt to move the SMD led floodlight by the lead or
pull it to remove the plug from the mains socket. Keep the lead away from heat, oil
and sharp edges. If the lead is damaged, it must be replaced with the manufacturers
original part, this will avoid any unwanted hazards.
CHECK FOR DAMAGED PARTS: Before every use of the SMD led floodlight, parts that
are damaged should be carefully checked to determine that it will operate correctly
and perform its intended function. Check for breakage of parts, and any other condi-
tions that may affect its operation. Glass or any other part that are damaged should
be correctly repaired or replaced by an authorised service centre unless otherwise
indicated in this instruction manual. Have defective switches replaced by an author-
ised service agent.
MAINTAIN THE SMD LED FLOODLIGHT WITH CARE: Keep the glass clean for the best and
safest performance.
USE ONLY RECOMMENDED ACCESSORIES: Consult this user manual, your distributor or
SIP directly for recommended accessories. Follow the instructions that accompany the
accessories. The use of improper accessories may cause hazards and will invalidate
any warranty you may have.
USE THE RIGHT TOOL: Do not use the SMD led floodlight to do a job for which it was not
designed.
DO NOT OPERATE THE SMD LED FLOODLIGHT IN EXPLOSIVE ATMOSPHERES: Do not use
the SMD led floodlight in the presence of flammable liquids, gases, dust or other com-
bustible sources.
HAVE YOUR SMD LED FLOODLIGHT REPAIRED BY A QUALIFIED PERSON: The tool is in ac-
cordance with the relevant safety requirements. Repairs should only be carried out by
qualified persons using original spare parts, otherwise this may result in considerable
danger to the user.
DO NOT dismantle, tamper with or use the SMD led floodlight without the glass and
covers fitted as this may be dangerous and will invalidate the warranty.
Stop operation immediately if you notice anything abnormal.
Use of improper accessories may cause damage to the SMD led floodlight and
surrounding area as well as increasing the risk of injury.
Do not modify the SMD led floodlight to do tasks other than those intended.
Severe permanent eye injury can result from starring directly at the led lights.
