Sirio Antenne MS098 User manual

ATTENTION
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL OR CALL
CUSTOMER SERVICE BEFORE YOU RETURN THIS PRODUCT TO THE
STORE WHERE IT WAS PURCHASED.
For Customer Service:
USA: Email: [e-mail] /Call: 1-877-897-1222
CANADA: Email: [e-mail] /Call: 1-866-666-0421
INSTRUCTION MANUEL ENCLOSED
INSTRUCTION MANUEL ENCLOSED

MODULAR SEATING
MODULAR SEATING INSTRUCTION
MS098 MS118 MS119
PARTS LIST
Part Description Quantity
PARTS
A Armrests 6
B Chair Back Frame Poles 6
C Club Chair’s Chair Backs 2
D Club Chair’s Chair Seats 2
E Loveseat’s Chair Backs 1
F Loveseat’s Chair Seats 1
G Table Top Frame 1
H Tempered Glass 1
I Table Legs 4
HARDWARE
J Allen Key & Spanner 1
K Bolts M6*15mm 25
L Bolts M6*25mm 12
M Bolts M6*50mm 18
N Washers 59
O Screws 10
P Plastic End Caps(1) 73
Q Plastic End Caps(2) 28
For Customer Service:
Email: [email protected]
[email protected]
Call:1-877-897-1222 / 1-866-666-
0421

1. Locate the Club Chair’s Chair Seat(D) to the Chair Back Frame Pole(B) by the
predrilled threads. Fasten Bolts(K) with Washers(P) by Using Allen Key(J). Cap Plastic
End Caps(1) on top of Every bolts’head. 4 bolts should be fastened totally, 2 for
each pole. (Step 1 as Club Chair)
2. Locate the Club Chair’s Chair Back(C) to the Chair Back Frame Pole(B) by the
predrilled threads. Fasten Bolts(L) with Washers(P) by Using Allen Key(J). Cap Plastic
End Caps(1) on top of Every bolts’head. 4 bolts should be fastened totally, 2 for
each pole. (Step 2 as Club Chair)
3. Locate the Armrests(A) to the Chair Back Frame Pole(B) and the Club Chair’s Chair
Seat(D) by the predrilled threads. Fasten Bolts(M) with Washers(P) by Using Allen
Key(J). 6 bolts should be fastened totally, 3 for each armrest. When it comes to the
armrest and the chair seat’s second bolt, fasten a Screw(O) with Spanner(J). Cap
Plastic End Caps(1) on top of Every bolts’head. Cap Plastic End Caps(2) on top of
the screw. (Step 3 as Club Chair)
PLEASE READ AND FOLLOW ALL SAFETY TIPS
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all
parts. Make sure you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts, please email
Customer Service: USA:
[e-mail]
or call 1-877-897-1222. Canada:
[e-mail] or call 1-866-666-0421. Please identify the parts you need and model
number. Make sure to include your name and address.

4. Locate the Loveseat’s Chair Seat(F) to the Chair Back Frame Pole(B) by the
predrilled threads. Fasten Bolts(K) with Washers(P) by Using Allen Key(J). Cap Plastic
End Caps(1) on top of Every bolts’head. 4 bolts should be fastened totally, 2 for
each pole. (Step 1 as Loveseat)
5. Locate the Loveseat’s Chair Back(E) to the Chair Back Frame Pole(B) by the
predrilled threads. Fasten Bolts(L) with Washers(P) by Using Allen Key(J). Cap Plastic
End Caps(1) on top of Every bolts’head. 4 bolts should be fastened totally, 2 for
each pole. (Step 2 as Loveseat)
6. Find joint threads within the underpart of the Loveseat’s Chair Back the Chair
Seat(F). Fasten a Bolt(K) with Washer(P) by using Allen Key(J). Cap Plastic End Caps(1)
on top of this bolt’s head. (Step 3 as Loveseat)
7. Locate the Armrests(A) to the Chair Back Frame Pole(B) and the Club Chair’s Chair
Seat(F) by the predrilled threads. Fasten Bolts(M) with Washers(P) by Using Allen
Key(J). 6 bolts should be fastened totally, 3 for each armrest. When it comes to the
armrest and the chair seat’s second bolt, fasten a Screw(O) with Spanner(J). Cap
Plastic End Caps(1) on top of Every bolts’head. Cap Plastic End Caps(2) on top of
each screw. (Step 4 as Loveseat)

8. Locate Table Legs(I) to the Table Top Frame (G) by each corner. Fasten Bolts(K)
with Washers(P) by using Allen Key. Be careful that 1 of the bolts should be fastened
reversely compared to the other 2. Fasten Screws(O) to this very bolt with Spanner(J).
12 bolts should be fastened totally, 3 for each leg. Cap Plastic End Caps(1) on top
of Every bolts’head. Cap Plastic End Caps(2) on top of the screw. (Step 1).
9. Put the Tempered Glass on top of the Table Top Frame(G).
Now you have finished the whole assembly and enjoy your Seating Set.