Sirio Antenne DS070 User manual

[email protected]
ATTENTION
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL OR CALL
CUSTOMER SERVICE BEFORE YOU RETURN THIS PRODUCT TO THE
STORE WHERE IT WAS PURCHASED.
For Customer Service:
USA: Email: /Call: 1-877-897-1222
CANADA: Email: [e-mail] /Call: 1-866-666-0421
INSTRUCTION MANUAL ENCLOSED

OUTDOOR DINNING SET
OUTDOOR DINNING TABLE ASSEMBLY INSTRUCTION
A
x2
B
x1
C
x1
1
x8 M6x15
2
x2 M6x30
3
x4 M6x40
4
x14
5
x1
PARTS LIST
Part Description Quantity
PARTS
A Table Legs 2
B Table Top 1
C Support Bar of Table 1
HARDWARE
1 Bolt M6x15 8
2 Bolt M6x30 2
3 Bolt M6x40 4
4 Steel Washer M6 14
5 Allen Key 1
DS070
INSTRUCTION MANUAL ENCLOSED

1. Position Table Leg(A) and Table Top (B) by the pre-drilled threads. Use
Allen Key(5) to fasten Bolts (1) with Washers (4). Each hinge should have 2
bolts fastened. (Photo 1). Do not tighten bolts.
For Customer Service:
Email:
[email protected]
Call:1-877-897-1222 / 1-866-666-0421
PLEASE READ AND FOLLOW ALL SAFETY TIPS
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all
parts. Make sure you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts, please email
Customer Service: USA: or call 1-877-897-1222. Canada:
[e-mail] or call 1-866-666-0421. Please identify the parts you need and model
number. Make sure to include your name and address.
Warm Tips:
1. The plastic covers on some metal parts are just for product protection, Please remove
it before assembly.
2. Please follow the sequence of AI during assembly.
3. Do not tighten the screws until all of them are in right positions.
[email protected]
[email protected]

2. Position Table Leg(A) and Support Bar of Table(C) by the pre-drilled
threads. Use Allen Key(5) to fasten Bolts (3) with Washers (4). This step should
have 4 bolts fastened. (Photo 2). Do not tighten bolts.
3. Position Table Top (B) and Support Bar of Table(C) by the pre-drilled
threads. Use Allen Key(5) to fasten Bolts (4 with Washers (4). This step
should have 2 bolts fastened. (Photo 2). Do not tighten bolts.
4. Tighten all bolts, and you will finish assembly table.
You have completed assembling the furniture – enjoy!

OUTDOOR DINNING SET
OUTDOOR DINNING BENCH ASSEMBLY INSTRUCTION
D
x2
E
x2
F
x2
G
x2
H
x2
I
x2
3
x20 M6x40
4
x20
5
x1
PARTS LIST
Part Description Quantity
PARTS
D Right Leg 2
E Backrest 2
F Seat 2
G
Left Leg
2
H
Seat
Cushion
2
I Pillows 2
HARDWARE
3 Bolt M6x40 20
4 Steel Washer M6 20
5 Allen Key 1
DS070

1.Use Allen Key(5) to loosen Bolts of the Backrest(E) about 10 mm(Photo 1).
For Customer Service:
Email: [email protected]
[email protected]
Call:1-877-897-1222 / 1-866-666-0421
PLEASE READ AND FOLLOW ALL SAFETY TIPS
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all
parts. Make sure you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts, please email
Customer Service: USA: [e-mail] or call 1-877-897-1222. Canada:
[e-mail] or call 1-866-666-0421. Please identify the parts you need and model
number. Make sure to include your name and address.
Warm Tips:
1. The plastic covers on some metal parts are just for product protection, Please remove
it before assembly.
2. Please follow the sequence of AI during assembly.
3. Do not tighten the screws until all of them are in right positions.

2. Position Right leg (D) and Backrest (E) by the pre-
drilled threads. Use Allen Key(5)
to fasten Bolts (3) with Washers (4). Each frame should have 1 bolt fastened. (Photo
2). Do not tighten bolts.
3.Position Right leg (D) and Seat (F) by the pre-drilled threads. Use Allen
Key(5) to fasten Bolts (3) with Washers (4). Each frame should have 6 bolts
fastened. (Photo 3). Do not tighten bolts.

4. Position Left leg (G) & Backrest (E) and Seat (F) by the pre-drilled threads.
Use Allen Key(5) to fasten Bolts (3) with Washers (4). Each frame should have
3 bolts fastened. (Photo 4). Do not tighten bolts.
5.Tighten all bolts, put cushion (E) and pillow (F) on the seatrest (Photo 5)
6. Follow the same instruction for the balance chairs .
You have completed assembling the furniture – enjoy!

OUTDOOR DINNING SET
OUTDOOR DINNING STOOL ASSEMBLY INSTRUCTION
J
x4
K
x8
L
x4
M
x4
N
x4
2
x48 M6x30
4
x48
5
x1
PARTS LIST
Part Description Quantity
PARTS
J Seat 4
K Leg 8
L Side Board# 1 4
M
Side Board#
2
4
N Seat Cushion 4
HARDWARE
2 Bolt M6x30 48
4 Steel Washer M6 48
5 Allen Key 1
DS070
For Customer Service:
Email: [email protected]
[email protected]
Call:1-877-897-1222 / 1-866-666-0421

1.Position Seat (J) & Side Board#1(L) & Side Board#2(M) and Leg (K) by the
pre-drilled threads. Use Allen Key(5) to fasten Bolts (2) with Washers (4).
Each side should have 3 bolts fastened. (Photo 1), tighten all bolts.
PLEASE READ AND FOLLOW ALL SAFETY TIPS
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all
parts. Make sure you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts, please email
Customer Service: USA: [e-mail] or call 1-877-897-1222. Canada:
[e-mail] or call 1-866-666-0421. Please identify the parts you need and model
number. Make sure to include your name and address.
Warm Tips:
1. The plastic covers on some metal parts are just for product protection, Please remove
it before assembly.
2. Please follow the sequence of AI during assembly.
3. Do not tighten the screws until all of them are in right positions.

2. Put the cushion (N) on the seatrest ( Photo 2)
3. Redo 4 times for stool.
You have completed assembling the furniture – enjoy!