Sirius XM RAdio XM Indoor User manual

At SiriusXM, our customers’ satisfaction with the performance of their
Radios is extremely important to us. In this guide, we have prepared
a series of instructions and tips for you to show you the best methods
for selecting a location for your antenna, how to install it, and how to
connect it to your SiriusXM Radio.
XM Indoor/Outdoor
Home Antenna
Installation Guide
Placed Indoors
Indoor/Outdoor Home Antenna

2
XM Indoor/Outdoor Home Antenna Installation Instructions: Placed Indoors
Step 1: Do You Live in a Major Metropolitan Area?
Step 1 will provide quick instructions to determine
if you can receive the terrestrial repeater signal.
Otherwise, begin with Step 2.
SiriusXM has terrestrial repeaters in major
metropolitan areas. These ground-based repeaters
transmit the SiriusXM signal into your home or
office, eliminating the need to aim the antenna at
a satellite. Follow these instructions for a quick
test to see if you can receive the terrestrial signal.
1. Place the antenna in a convenient location
inside of your home.
2. Open the antenna clamshell so that it is halfway
between the horizontal and vertical positions as
shown.
3. Connect the antenna cable to the ANT connection
on the Radio or Home Dock.
4. Turn your SiriusXM Radio ON and access
the Signal Indicator (or Antenna Aiming)
screen. (Consult your Radio’s User Guide
for instructions on accessing the screen.)
The Signal Indicator screen shows the
strength of both the satellite (SAT)
signal and the terrestrial (ground) (TER)
signal. The strength of the terrestrial
(ground) signal may vary, or there
may be none if you are not in a major
metropolitan area.
If you’re receiving a terrestrial (ground)
(TER) signal, try experimenting with the
antenna to get a feel for the reception in
your location. Move the antenna around
the room, from room to room, and aim it
toward different windows. In major metropolitan
areas, you might find that you get great reception in
several locations without worrying too much about
aim and placement. If you find a location where
there’s good terrestrial signal strength, place the
antenna there. The installation is complete.
ANTAUDIO POWER
Step 1: Terrestrial Installation

3
XM Indoor/Outdoor Home Antenna Installation Instructions: Placed Indoors
Step 2: Place the Antenna
Find a suitable window in your home or office that faces south.
• This window needs to have a clear, unobstructed view of the sky.
• There should NOT be any blinds or curtains between the antenna and the glass
window pane.
• There should NOT be any metal screens or bars on the window.
• There should NOT be any buildings, shrubs, trees, roof overhangs, or anything else
obstructing the antenna’s view of the south sky (see below).
Step 2: Place the Antenna
S
SOUTH
OK

4
XM Indoor/Outdoor Home Antenna Installation Instructions: Placed Indoors
Place the antenna on the windowsill of a suitable
window that faces south. Not sure which way is
south? Think about where the sun rises (in the
east) and sets (in the west). Then stand so that east
is to your left and you’ll be facing south.
Note: If placing the antenna on the windowsill
results in the antenna directly facing the window’s
frame, place a book or other flat object under the
antenna to prop the antenna up so that it is facing
the glass window pane.
The surface of the antenna shown in gray should be facing
the window pane and should be pointed south.
Step 2: Place the Antenna

5
XM Indoor/Outdoor Home Antenna Installation Instructions: Placed Indoors
Step 3: Aim the Antenna
Open the antenna clamshell so that it is halfway between the horizontal and vertical
positions as shown.
Orient the antenna so that the shaded surface shown is facing the window.
Step 3: Aim the Antenna

6
XM Indoor/Outdoor Home Antenna Installation Instructions: Placed Indoors
Step 4: Connect the Antenna to Your SiriusXM Radio or Home Dock
Connect the antenna cable to the ANT connection on the Radio or Home Dock.
ANTAUDIO POWER
Step 4: Connect the Antenna

7
XM Indoor/Outdoor Home Antenna Installation Instructions: Placed Indoors
Step 5: Verify Signal Reception
Turn your SiriusXM Radio ON and access the Signal Indicator (or Antenna Aiming)
screen. (Consult your Radio’s User Guide for instructions on accessing the screen.)
The Signal Indicator screen shows the strength of
both the satellite (SAT) signal and the terrestrial
(ground) (TER) signal (if available).
We need to fine tune the aim of the antenna to
optimize signal reception. While watching the
Signal Indicator screen, rotate the antenna left
or right in small increments, as shown, until the
highest possible satellite (SAT) signal strength is
achieved.
While continuing to watching the Signal Indicator
screen, adjust the tilt angle in small increments,
toward the horizontal or vertical positions, as
shown, until the highest possible satellite (SAT)
signal strength is achieved. The installation is
complete.
SOUTH
Step 5: Verify Signal Reception

8
XM Indoor/Outdoor Home Antenna Installation Instructions: Placed Indoors
Signal Distribution Accessories For You to Consider
50 ft. Antenna Extension Cable: If the cable attached to the antenna is not long enough,
you can use a 50’ long antenna extension cable (sold separately) to extend the antenna
cable.
Accessories
www.siriusxm.com
Sirius XM Radio Inc.
1221 Avenue of the Americas
New York, NY 10020
1.800.967.2346
© 2011 Sirius XM Radio Inc.
XM Indoor/Outdoor Home Antenna - Indoors 012511a