SKLZ PRO MINI SOCCER User manual

V2
Thank you for choosing the SKLZ Pro Mini Soccer. We are dedicated to providing you with the best tools and instruction possible to help you prepare for
your sport. If there is anything else we can do to help, don’t hesitate to send us an email at [email protected] or give us a call toll-free 1-800-446-7587.
BEFORE YOU BEGIN:
• Read all instructions carefully before using. Failure to do so may result in injury or damage to the product.
• Always check for wear and tear before use. If any is found, do not use the product.
• If you are missing any Pro Mini Soccer components, please contact Implus customer service toll-free at 1-800-446-7587.
• Adult assembly required.
iWARNING:
• CHOKING HAZARD: Contains small parts. Not for children under 3 years of age.
• Athletes under 18 years of age should use only under adult supervision.
• Regularly check for wear and tear. Stop using the Pro Mini Soccer if any part of it breaks. Failure to do so could result in injury.
• When in use, make sure the Pro Mini Soccer is set up in a clear area to avoid injury.
• Any alteration of this product or its components will result in a disclaimer of liability.
iCAUTION:
• Keep away from fire and heat sources.
• Do not leave the Pro Mini Soccer outdoors for extended periods of time.
• Avoid storing the Pro Mini Soccer in extremely hot or cold environments, as this could reduce the life span of the product.
• When in use, make sure the Pro Mini Soccer is set up in a clear area to avoid damage to property.
• When done, disassemble the Pro Mini Soccer and store after use. Do not leave Pro Mini Soccer outdoors.
PRO MINI SOCCER
GETTING STARTED
1-YEAR LIMITED WARRANTY
This warranty does not cover damages resulting from accidents, misuse, abuse or lost merchandise.
Need proof of purchase for warranty coverage. Questions? Email [email protected] or call toll-free 1-800-446-7587.
Made in China. ©2020 Implus Footcare, LLC. Manufactured and distributed by Implus Footcare, LLC: 2001 T.W. Alexander Drive, Box 13925, Durham, NC 27709-3925. SKLZ is a trademark or registered trademark of
Implus Footcare, LLC in the U.S. and/or other countries. Product features, appearance and specifications may be subject to change without notice. Unauthorized duplication is a violation of applicable local and international laws.

IN THE BOX
ASSEMBLY
VISIT SKLZ.COM TO LEARN MORE
STEP 1:
Take top frame pole (B) and slide through sleeve at top
of net (A) where SKLZ logo is located.
Note: Logo should face out.
STEP 8:
Insert the fiberglass pole (G) into back corner
joint (F) hole. Repeat on right side.
STEP 4:
Connect bottom corner joint (E) to bottom of left side
pole (D). Repeat on right side.
Note: Bottom corner joints should face back of net.
STEP 5:
Slide another pole (D) into left bottom sleeve of net,
and connect to corner joint. Repeat on right side.
STEP 7:
Slide back frame pole (C) into net sleeve, and connect to
back corner joint on left pole. Repeat on right side.
STEP 6:
Connect back corner joint (F) to bottom left pole.
Repeat on right side.
Note: Holes on corner joints should face up.
STEP 2:
Place corner joints (E) on top frame pole on both the
right and left sides.
STEP 9:
Locate black tabs on the net. Loop over
fiberglass poles on the right and left sides.
STEP 3:
Slide left side pole (D) into net sleeve, and connect to top
corner joint (E). Repeat on right side.
NET
FIBERGLASS
POLES (2)
TOP FRAME POLE
BACK FRAME POLE SIDE POLES (4)
BACK CORNER JOINTS (2)
(HAVE A HOLE IN THEM)
A
G
B
CDFRONT
CORNER
JOINTS (4)
E
F