SKLZ PRO TRAINING GOAL User manual

Thank you for choosing SKLZ Pro Training Goal. We are dedicated to providing you with the best tools and instruction possible to help you unleash your athletic potential.
If there is anything else we can do to help you optimize your training, don’t hesitate to send us an email ([email protected]) or give us a call (1-877-225-7275).
BEFORE YOU BEGIN:
•Read all setup and usage instructions carefully.
•Adult assembly required.
•When done, disassemble Pro Training Goal and store after use. Do not leave Pro Training Goal outdoors.
•Keep away from fire and heat sources.
•Regularly check for wear and tear. Stop using net if any part of it breaks. Failure to do so could result in injury.
•Make sure you have all Pro Training Net components. Please contact SKLZ customer service toll free at 1-877-225-7275 x 128 if you are missing anything.
iWARNING:
•Pro Training Goal is under tension when set up. Please take the utmost care when releasing the tension during disassembly. Failure to do so may result in injury.
•Do not climb or hang on the Pro Training Goal.
•When in use, make sure the Pro Training Goal is set up in a clear area to avoid injury and/or damage to property.
•To avoid pinching, use caution when connecting the push-button tubing.
CARE:
•Do not store in extremely high or low temperatures to avoid damage or reducing the life of the product.
•Do not leave Pro Training Goal outdoors for extended periods of time.
•Make sure Pro Training Goal is free of debris and moisture before storing.
•Before every use, check for rust and/or other damage.
PATENT#: US 8,246,496; 8,579,737; CHINA
101678299; EU EP2146786 B1. ADDITIONAL US
& WORLDWIDE PATENTS PENDING
IDEA SUBMISSION
If you have an idea for a new and innovative sports
training product, visit SKLZ.com to submit your concept.
Some restrictions may apply.
1 YEAR LIMITED WARRANTY
This warranty does not cover damages resulting from accident, misuse, abuse or lost merchandise, and is only valid in the USA.
Register your product at SKLZ.com to ensure warranty coverage, and get new product information and special deals from SKLZ.
Questions? Email: [email protected] or call toll free: 877-225-7275
Made in China. ©2015 Pro Performance Sports, LLC. All rights reserved. Manufactured and distributed by SKLZ/Pro Performance Sports: 2081 Faraday Avenue, Carlsbad, CA 92008 U.S.A.
SKLZ is a registered trademarks of Pro Performance Sports, LLC., its subsidiaries and affiliates. Product features, appearance, and specifications may be subject to change without notice.
Unauthorized duplication is a violation of applicable local and international laws.
PRO TRAINING GOAL
GETTING STARTED
5x3 NET
V4

1
3
5
2
4
6
Carefully remove goal from storage bag (A) and unroll net from base
frame (B). Net is permanently attached to the frame for easy setup.
Roll frame so it lays with rubber feet facing down. Unlock and unfold
front arms away from you until they lock into place.
Attach net to tops of support poles by inserting the pins at the top of
the pole into the clips attached to the net. Connect the front of the net
to the taller section of the Dual Tension-TiteTM support poles first, then
the back second. Follow the same order on the opposite side. For taller
goal sizes, you may need to lean the goal forward in order to reach top
corners. Be careful not to let go until the pin is fully inserted to avoid
injury. Connect the bottom of the posts to the frame by hooking the
bottom loop to the front of the post. Use ground stakes (D) to secure
the assembled goal in place for use.
Unfold two side legs of the base frame by swinging them left and right
from center hinge until they lock into place.
Assemble the Dual Tension-TiteTM support poles (C) and insert into
each of the rear corner joints of the base frame and lock into place.
Poles will fit in either side. The segments of these support poles are
permanently connected using elastic cords to simplify assembly.
Disassemble your goal by reversing the above procedure. Begin by
detaching the net from the support poles by pulling the pins from the
corners. Disassemble the support poles and fold connected segments
together. Use the silver release buttons to fold front arms back and to
slide telescoping sections together. Fold base frame at center hinge
and roll net around frame. Carefully place into storage bag.
VISIT SKLZ.COM FOR INSTRUCTIONAL VIDEO AND CONTENT
GETTING STARTED
IN THE BOX
STORAGE BAG
ABASE FRAME WITH
ATTACHED NET
BB DUAL TENSION-TITE™
SUPPORT POLES (2)
BC GROUND STAKES (2) D