SKLZ 12i User manual

12i PUTTING MIRROR
GETTING STARTED
IDEA SUBMISSION
If you have an idea for a new and innovative sports
training product, visit SKLZ.com to submit your concept.
Some restrictions may apply.
1 YEAR LIMITED WARRANTY
This warranty does not cover damages resulting from accident, misuse, abuse or lost merchandise, and is only valid in the USA.
Register your product at SKLZ.com to ensure warranty coverage, and get new product information and special deals from SKLZ.
Questions? Email: [email protected] or call toll free: 877-225-7275
Made in China. ©2015 Pro Performance Sports, LLC. All rights reserved. Manufactured and distributed by SKLZ/Pro Performance Sports: 2081 Faraday Avenue, Carlsbad, CA 92008 U.S.A.
SKLZ is a registered trademarks of Pro Performance Sports, LLC., its subsidiaries and affiliates. Product features, appearance, and specifications may be subject to change without notice.
Unauthorized duplication is a violation of applicable local and international laws.
Thank you for choosing SKLZ 12i Putting Mirror. We are dedicated to providing you with the best tools and instruction possible to help you prepare for your sport.
If there is anything else we can do to help, don’t hesitate to send us an email ([e-mail]) or give us a call (1-877-225-7275).
BEFORE YOU BEGIN:
• Read all setup and usage instructions carefully.
• Always check for wear and tear before use. If any is found, do not use the product.
• Make sure you have all 12i Putting Mirror components. Please contact SKLZ customer service toll free at 1-877-225-7275 if you are missing anything.
iCAUTION:
• Do not store in extremely high or low temperatures. This could damage or shorten the life span of the 12i Putting Mirror.
• When in use make sure the 12i Putting Mirror is set up in a clear area to avoid damage to property.
• When using the 12i Putting Mirror, please have others stay clear of the putting area to reduce risk of injury.
CARE:
• The 12i Putting Mirror can be cleaned with a standard glass cleaner that would be used on a household mirror.
iWARNING:
• CHOKING HAZARD - Product contains small parts. Not for children under 3 years.
V3

VISIT SKLZ.COM FOR INSTRUCTIONAL VIDEO AND CONTENT
IN THE BOX
GUIDE PEGS (8)
B
12i PUTTING MIRROR
A
STORAGE BAG
C
1
SECURING THE MIRROR
The mirror can be secured to the putting surface by
placing two tees through the holes on the opposite end
of the exit gate. NOTE – Tees are not included.
4
ACCELERATING STROKE
Place a peg or tee in the hole on the black line behind
the ball position in order to reduce the length of the
backstroke and force acceleration in the through-stroke.
USAGE
OPTIONAL
STEPS
1- Place the mirror (A) on a flat putting surface
and aim the exit gate (the end with two middle
holes) toward your target.
2- Place the ball on the circle in the center of
the mirror.
3- Place two guide pegs (B) in the holes of the exit
gate to encourage a square putter face at impact.
If the putter is square at impact, the ball will roll
through the two pegs of the exit gate.
4- Place the guide pegs in the holes along the yellow
lines closest to you and use the black line down
the middle of the mirror as a guide to help keep the
putting stoke on the optimal path.
NOTE: If the putter touches and knocks any of the
guide pegs out of the holes, the golfer’s stroke
is not on the correct path.
5- Set up the ball so you can see your eyes directly
over it in the mirror, and your shoulders, knees and
feet are parallel to the black line.
12i
LH
RH
SKLZ.com
SKLZ.com
12i
12i
LH
RH
SKLZ.com
SKLZ.com
12i
12i
LH
RH
SKLZ.com
SKLZ.com
12i
12i
LH
RH
SKLZ.com
SKLZ.com
12i
EXIT GATE
A
B
B