SKLZ QuickSwing Manual

SET-UP AND USAGE
Joe Mauer
» AL Batting Champion ‘06, ’08, ‘09
» 2009 League MVP

WARNING: Always wear a helmet with face guard
Improper use of this product can result in serious injury. Read and follow enclosed
instructions for the proper and safe use of QuickSwing before you begin.
QUICKSWING PARTS LIST
Before you begin assembly, check your inventory. Lay all the pieces out to make sure
you have received all required parts and components. You will need a Phillips-head
screwdriver for the battery cover and 3 AA batteries for the motor. Please contact SKLZ
customer service toll free at 877-225-7275 x128 if you are missing anything.
QUICKSWING PARTS:
A – Base Stand B – Telescoping
Base Pole
C – Support Clamp E – Motor Clamp
D – Auto-feed Motor
F – Rotatable
End Dial
G – Feeder Tube H – Straight Tube

SKLZ.com
MANUAL-FEED PARTNER-FEED
QUICKSWING AUTO-FEED
Auto-feed Motor (D)
Support Clamp (C)
Base Stand (A)
Telescoping
Base Pole (B)
Rotatable End Dial (F)
Feeder
Tube (G)
Motor
Clamp (E)
Straight Tube (H)

INSTRUCTIONS FOR AUTO-FEED SET-UP:
STEP 1–BASE STAND AND TELESCOPING BASE POLE ASSEMBLY
Fully extend the legs of the Base Stand (A) until they lock into place. Stand the base
on the ground. Attach Telescoping Base Pole (B) into the top of the Base Stand (A) by
lining up the push pin with the hole. Lock push pin into place.
STEP 2–ATTACH THE SUPPORT CLAMP AND TUBES
Slide the Support Clamp (C) into the Telescoping Base Pole (B) and secure with the
knobs on the pole. Attach the Feeder Tube (G) and Straight Tube (H) together. Fit
flanged end of the Straight Tube over the Feeder Tube. The motor slot should be facing
the ground. Slide the tubes into the Support Clamp (C) and clamp.
Note: Make sure that the straight tube is angled down, as pictured below.
STEP 3–PLACE 3 AA BATTERIES INTO AUTO-FEED MOTOR (Batteries not Included)
Unscrew the battery cover on the
Auto-Feed Motor (D) with a Phillips-
head screwdriver. Install 3 AA
batteries into the motor and replace
cover. Slide Auto-Feed Motor (D)
into Motor Clamp (E) (make sure to
slide the motor in all the way).
H
G
E
D

SKLZ.com
STEP 4–ATTACH THE MOTOR
Slide the Auto-Feed Motor with Clamp (D & E)
into the slot on the bottom of the Straight Tube
(H). Make sure the retaining pin slides into pin
hole and then clamp.
NOTE: Be sure the on/off button is on the same side as the white guide on the tube.
STEP 5–ATTACH THE ROTATABLE END TUBE
Attach the Rotatable End Tube (F) to the
Straight Tube (H). You should be able to turn
the Rotatable End Tube (F) to your desired
angle.
STEP 6–LOAD BALLS AND ADJUST SPEED
Make sure the pin is in the pin hole and load the
QuickSwing with balls. Adjust the timer on the
motor for how fast or slow you want the balls to drop out of the QuickSwing. Remove
pin then move the switch to the ON position. To change speeds, turn off the motor first
and then adjust the speed.
INSTRUCTIONS FOR PARTNER-FEED SET-UP:
Set up the QuickSwing the same way you would for the QuickSwing Auto-Feed but do
not attach the motor.
Pin
H
F
H

INSTRUCTIONS FOR MANUAL-FEED SET-UP:
Follow STEP 1–BASE STAND AND TELESCOPING BASE POLE ASSEMBLY from the
Auto-Feed set-up.
STEP 2–ATTACH THE SUPPORT CLAMP AND TUBES
Slide the Support Clamp (C) into the Telescoping Base Pole (B) and secure with the
knob on the pole. Clamp the Feeder Tube (G) into the Support Clamp (C).
NOTE: Slide the Feeder Tube (G) as far forward as you can. You will only attach one
bracket on the clamp to allow for enough hitting room.
Attach the Straight Tube (H) to the Feeder Tube (G). Straight Tube will fit over the top
of the Feeder Tube.
STEP 3–ATTACH THE ROTATABLE END TUBE
Attach the Rotatable End Tube (F) to the Feeder Tube (G). You should be able to rotate
the Rotatable End Tube (F) to desired angle.
ROTATABLE END TUBE:
The QuickSwing rotatable end tube fully rotates to allow you to control how fast the ball
drops before you hit it.
» For a slower ball drop,
adjust the end tube to a
horizontal position.
» For an average ball drop,
adjust the end tube to a
45 degree angle.
» For a quick ball drop,
adjust the end tube to
a downward position.
H

SKLZ.com
PERFECT FOR PRACTICE WITH OTHER SKLZ PRODUCTS:
» 8” circumference baseball provides a smaller target
to encourage batters to keep their eyes on the ball
» Builds greater eye-hand coordination
» Same construction as an official baseball,
synthetic leather cover
» 2.5 oz. weight
» Available in a 6-pack (3 colors, 2 each)
MSRP: $19.99
» Sturdy 7’ multi-sport net
» For indoor or outdoor practice
» Sets up quickly and easily
» Includes convenient carry bag
MSRP 5ft: $59.99
» The quickest way to get your game or practice going,
sets up and breaks down in minutes
» Strong-ply netting, heavy gauge nylon, and rigid support
poles provide added sturdiness
» Fits in included bag for easy carrying
» Includes 4 Ground Stakes to secure goal into the ground
» Lightweight, easy up and down net
» Perfect for pitching or hitting practice
» Includes removable pitching target
MSRP 5ft: $99.99
MSRP 7ft: $119.99
AUTHENTIC SMALL-CIRCUMFERENCE BALL
MULTI-SPORT TRAINING NET
HEAVY DUTY QUICK ASSEMBLY MULTI-SPORT NET

rev.11/10
VIDEOS
www.SKLZ.tv
Become a fan on Facebook:
facebook.com/SKLZfans
Follow us on Twitter:
@teamSKLZ
90-DAY LIMITED WARRANTY – QUICKSWING®
Pro Performance Sports (PPS) warrants to the original consumer purchaser of any PPS product it manufactures
that the product will be free of defects in materials or workmanship for 90 days (unless specified in alternate
warranties) from the date of purchase. If defective, and purchased from a retail store, return the product along
with receipt to the retail store where the product was purchased. If the item was purchased from PPS, return the
product along with proof of the date of purchase (i.e. the packing slip), postage prepaid to the address below
for replacement consideration:
Pro Performance Sports :: 5823 Newton Dr, Suite 130 :: Carlsbad, CA 92008 :: Attn: Returns
This warranty does not cover damages resulting from accident, misuse, abuse or lost merchandise.
Only valid in the USA. All returns sent to PPS require a Return Merchandise Authorization number (RMA).
For returns to PPS and for all other Customer Service inquiries, please call toll free: 1-877-225-7275
Register your product at SKLZ.com to ensure warranty coverage, get new product
information and special deals from SKLZ
DO YOU HAVE A WINNING SPORTS PRODUCT OR IDEA?
Visit our website to learn how to submit a product application for consideration.
It may become our next winning product!
SKLZ.com
Made in China
©2011 Pro Performance Sports.
All rights reserved.
Unauthorized duplication is
a violation of applicable laws.
U.S. Patent # 6,974,396