SKT 18665002 User manual

CORDLESS DRILL
20V
SKU No.:18665002
User manual
Original Instructions.
CAUTION! Read the instructions before
using this tool.

Guarantee
Thank you for investing in a SKT power tool. These
products have been made to demanding, high-quality standards and
are guaranteed for domestic use against manufacturing defects for
a period of 36 months from the date of purchase.
This guarantee does not affect your statutory rights. In
case of any malfunction of your tool (failure, missing part, etc.),
please contact one of our service technicians at our toll
free service line at 1-866-2 83-2 2 39 from 8 AM to 6 PM,
Monday to Friday, Eastern time. RONA reserves the right to repair
or replace the defective tool, at its discretion.
The product is guaranteed for 36 months if used for normal
trade purposes. Any guarantee is invalid if the product
has been overloaded or subject to neglect, improper use
or an attempted repair other than by an authorized agent.
Heavy-duty, daily professional or hire usage is
not guaranteed. Due to continuous product
improvement, we reserve the right to change the product specifications
without prior notice.
Register your product: We invite you to
register your product online to make
future communications easier.
To do so, simply visit our website
www.cnskt.com.

1. Battery charger
Pack contents
2. 2x 20V Li-ion batteries
3. Cordless drill
4. Instruction Manual (not illustrated)
3
2
1

This drill is designed for drilling holes in wood, plastic, metal and driving screwdriver
bits. It must be used in accordancewith the instructions and safety warnings contained
in this manual and may not be used for anyother purpose. The product is designed for
DIY use only and is not suitable for commercial or heavy duty use; such use may damage
the product and invalidate itswarranty.
The manufacturer cannot be held responsible for damage or injury caused by
misuse of this product.
Examples of misuse are given in the following non-exhaustive list:
. Use of product for any other than its intended purpose
. Use of accessories which are not suitable for the product
. Non-observance of the safety warnings and operating instructions
. Failure to follow the cleaning and maintenance instructions
. Any modification or alteration of the product
. Commercial or otherwise excessive use
1.Information
tool

hand-operated
tool,

1)Work area safety
a) Keep the work area clean and well lit. Cluttered or dark areas invite accidents
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2)Personal safety
a) Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing
protection used for the appropriate conditions will reduce the risk of personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to a power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
. CAUTION: The use of accessories or attachments other than those recommended
in this manual can lead to injury and may invalidate your warranty. Use only
original replacement parts.
. Hold the power tool by its insulated gripping surfaces, when performing an
operation where the drill bit or fastener may contact hidden wiring or its own cord.
Contact with a "live" wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
. Do not allow the tool to run unattended. Switch the tool off and do not
put it down until it has come to a complete stop.
. Secure the workpiece. Use a vice or clamping device to secure the workpiece.
This is much safer than holding the workpiece by hand and allows you to operate
the drill with both hands.
. Protection from dust: Wear a dust mask when undertaking jobs that may produce
dust.
. Damaged parts or safety mechanisms must be replaced or repaired by an
authorised workshop, unless stated differently in the operating instructions.

d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep a proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes,jewelry or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
3)Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and more safely at the rate for
which it was designed.
b) Do not use the power tool if the switch does not turn it on and off.Any power
tool that cannot be controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, its accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
4)Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.

BATTERY AND
BATTERY CHARGER
User manual
Original Instructions.
CAUTION! Read the instructions before
using the tool.

20V
light

when
main
main
a risk
a risk

it cuts

while on the charger
main
main
socket
fully charged tool
charger

18665-1
1500 18665-2
120VAC 60Hz
22V
20
1500
1.8A
main socket
grounding
free of lint, dust and other debris.

cordless drill
tool.
tool.
bits

cordless drill
RPM
RPM
tool

To select drilling mode, rotate the torque
control ring until the symbol lines up with
the indicator mark (E)

tool
scrap
Aluminum

LCD770-1S
20V
0.8-10
20
main socket
tool
maintenance
RPM
RPM

light