
FEATURES:
1.MICPHONES:
DJ/Mc have their own dedicated level control. microphones have individual 2 band eq section
2.TALKOVER
This is a two position switch OFF/ON
3.TRIM CONTROLS
Each of the music channels has a rotary trim control. The gain control adjusts the input level allowing the user to
reduce or increase the sound level. NOTE: care should be taken not to produce distortion with these controls as this
could result in damage to both the unit and any external equipment connected.
4.TONE CONTROLS
Each channel has dedicated Bass, Mid and High controls. NOTE: Care should be taken not to distort the output signal
using these controls.
5.CHANNEL LEVEL
These are used to adjust the output level for each channel.
6.CROSSFADER
The crossfader allows the mixing of one source into another.the crossfader in your unit is remoable and can be easily
replaced if needed.
7.CHANNEL SELECTORS
These are used to switch between Line input and Phono、mic input on each channel.
8.ASSIGN SWITCHES
Any of the four music channels can be assigned to either side of the crossfader by the setting of these switches.
9. LED DISPLAYER:
The unit has two LED displays Left output, Right output The left and right output display shows the
output level of the mixer.
10.POWER:
power switch
11.MASTER:
This controls the overall output from the mixer, master output to the PA System
12.PHONES LEVEL
This controls the output volume of the headphones. Care should be taken not to have this set to high as
it could result in damage to both the hearing of the user and the headphones. The channel to bemonitored is
selected via the cue assign controlKnob.