SkyBound ANCHOR KIT Setup guide

ANCHOR KIT
ASSEMBLY AND INSTALLATION MANUAL
www.SkyBoundUSA.com
www.TrampolinePartsCenter.com
2017 - 2019 FULOO LLC - ALL RIGHTS RESERVED
-Kiki (CEO) & Team SkyBound
A PERSONAL MESSAGE FROM OUR CEO
[email protected]
When I shop, I am not just buying a product or service. I purchase why
that brand focuses on what they do, what their corporate philosophy is,
the quality of their products, and whether or not my personal core values
align with that brand’s vision. When I don’t feel great about a company’s
brand, products, or how I’m being treated as a customer, then I know
they are not delivering on what matters most: exceeding the customer
expectation by delivering happiness with their products, quality, and
service.
This primary focus is what drives our culture at Team SkyBound. For
supporting our vision, we would like to personally thank you for trusting
us to deliver happiness to you and your family!
“Nurturing the inner-child in all of us by
uniting communities worldwide and
promoting an active lifestyle.”

- Anchor kit only works in dirt and grass; it is not functional in sand or concrete.
- Anchors have been tested to withstand winds up to 80 mph, however results may vary.
- During stormy or extreme weather, we highly suggest removing your trampoline mat,
net and springs and placing them in storage until the inclement weather has passed.
Trampoline Frame
ASSEMBLY INSTRUCTIONS
SkyBound, a Fuloo, LLC Company.
SkyBound is a registered trademark of Fuloo, LLC
in the U.S. and other countries. All logos, names,
characters, likenesses, images, slogans and
packaging appearance are the property of SkyBound.
PLEASE KEEP THIS MANUAL AS IT CONTAINS IMPORTANT INFORMATION
ANCHOR x4
STEP 1 STEP 2
WEBBING STRAPS
WITH BUCKLES x4
For customer service, please contact:
888-891-4689
Monday through Friday
8:00 am to 5:00 pm PST
or visit www.SkyBoundUSA.com
or www.TrampolinePartsCenter.com
LIMITED WARRANTY: ALL PARTS: 1 YEAR
Twist the anchor into the dirt
or grass directly below the
trampoline frame in-between
the legs of the frame.
Loop the webbing strap
around the frame and into
the anchor handle. Attach
the webbing strap into the
metal buckle and pull to
tighten the straps to the
trampoline frame.