Skyline Furniture 140NB Series User manual

(6) 3” x 5/16” bolts (24) 1¼” washers
(1) Headboard*
(2) wings* (2) metal legs
(10) 1” x 5/16” bolts (4) 1” x ¼” bolts (4) ¼” nuts
You will need:
• phillips screwdriver
• at head screwdriver
• pliers
*images might vary from actual product
*Open all hardware packets
before proceeding
headboard components
500BN headboard/bed
Assembly Instructions for 140NB, 300, 300nb, 320,
500BN, 500NB, & 530NB Series
LIMITED WARRANTY
SKYLINE FURNITURE INC. guarantees
its upholstered furniture against defects in
construction for a period of one (1) year.
When a structural defect is brought to our
attention, we will repair or replace it at our
option at no charge to the customer (includes
parts and labor, not transportation costs).
Fabric wearability for upholstered furniture
is not covered by the warranty. Vacuum for
regular cleaning.
PLEASE DISPOSE OF PLASTIC BAG (S) AND
CARTON (S) RESPONSIBLY.
LIMITE DE GARANTIA
SKYLINE FURNITURE INC. garantiza
sus muebles tapizados contra defectos en
construccion por un periodo de un (1) ano.
Cuando un problema de estructura es traido
a nuestra atencion, nosotros repararemos o
remplazaremos sin ningun cargo a nuestro
cliente (incluye partes y trabajo, no costo en
transportacion). Descoloramiento del materi-
al de muebles tapizados no es cubierto por la
garantia. Regularmente puede aspirar.
POR FAVOR TIRAR BOLSA (S) Y CAJA (S)
RESPONSABLEMENTE.
GARANTIE LIMITÉE
SKYLINE FURNITURE INC. garantit ses
meubles rembourrés contre les défauts de
construction pendant une période d’un (1)
an. Lorsqu’un vice de construction nous est
signalé, nous réparons ou remplaçons le
meuble, selon notre choix, sans frais pour le
client (incluant les pièces et la main-d’oeu-
vre, mais excluant les frais de transport). La
durabilité du tissu des meubles rembourrés
n’est pas couverte par la garantie. Nettoyer
régulièrement avec un aspirateur.
VEUILLEZ JETER LE OU LES SAC(S)
EN PLASTIQUE ET BOÎTE(S) DE FAÇON
RESPONSABLE.
If you have any questions, please call us at 1.800.542.7553
headboard & side rails hardware

(4) corner brackets
for all sizes
(2) side rails
for all sizes
support rails
(1) Twin/ Full/ Queen
(3) King/California King
(2) end rails
for all sizes
support legs
(1) Twin
(2) Full
(3) Queen
(6) King/California King
(4) legs
for all sizes
1” x ¼” bolts
(1) Twin
(2) Full
(3) Queen
(6) King/California King
¼” bolts
(10) Twin/ Full/ Queen
(14) King/California King
(4) ¾” washer
(larger center)
for all sizes
(4) ¾” x 5/16” bolts
for all sizes
¾” washer
(smaller center)
(1) Twin
(2) Full
(3) Queen
(6) King/California King
¼” nuts
(10) Twin/ Full/ Queen
(14) King/California King
(2) L Brackets
for all sizes
(8) ¾” screws
for all sizes
(1) wrench
for all sizes
(1) 5/32” L wrench
for all sizes
(1) 3/16” L wrench
for all sizes
(1) upholstered foot rail
for all sizes
(2) upholstered side rails
for all sizes
bed components
bed hardware

Attach each wing to headboard using:
1. (1) 3” x 5/16” bolt and (1) 1¼” washer
2. (1) 3” x 5/16” bolts and (1) 1¼” washer
3. (1) 3” x 5/16” bolts and (1) 1¼” washer
4. Repeat process for the other wing.
1
2
3
Step 1
Insert metal legs through the
holes in the headboard. Make
sure that you place the correct
leg facing “Out.”
Attach each metal leg to the
headboard using (2) 1” x 5/16”
bolts and (2) 1¼” washers for
each leg.
Continue onto step 3 if building
a bed or step 5 to attach the
headboard to your bed frame.
Step 2

1. Attach side rail and end
rail to corner bracket.
Make sure to align holes
and snap into thinner slot.
Continue this action until
you have a rectangular
frame.
2. Attach corners to rails using
(8) ¼” bolts and (8) ¼” nuts.
Step 3
3. Attach legs to rails using
(4) ¾” x 5/16” bolts and
(4) ¾” washers.
1
2
3

1. Attach each support bar using
(2) ¼” bolts and (2) ¼” nuts.
Make sure to attach the support
bar underneath the bed frame.
Note:
Twin/ Full/ Queen = 1 support bar
King/California King = 3 support bars
Step 4
2. Attach each support leg to the
bar using (1) 1” x ¼” bolts and
(1) ¾” washer.
Note:
Twin = 1 support leg
Full = 2 support legs
Queen = 3 support legs
King/California King = 6 support legs.
(2 legs for each support bar)
Attach bed frame to
headboard using (4) 1” x ¼”
bolts, (8) 1¼” washers*, and
(4) ¼” nuts.
* Use a washer on each side of
the metal legs when attaching
headboard to the bed frame.
Step 5
1
2
(Queen bed frame image displayed)
(Queen bed frame image displayed)

1. Use (6) 1” x 5/16” bolts,
(6) 1 ¼” washers to attach rails
to bed frame loosely. Screw in
side rails before attaching the
foot rail.
2. Push side rails towards foot
rail, so that there is no gap.
Begin nal tightening of all
bolts.
Step 6
2
1
(Queen bed frame image displayed)
Step 7
With a phillips screwdriver,
attach (2) L brackets and
(8) ¾” self-tapping screws in
the corners of the foot rail. This
is needed to increase stability of
upholstered rails.