Skyline Furniture Platform Series User manual

You will need:
• at head screwdriver
Notes:
• Open all hardware packets before proceeding.
• Two people are needed for assembly.
• Additional support legs are in wooden plank
roll box.
Standard platform bed
Assembly Instructions for
Platform Series
(6) 1¼” washers
bed components (continued on next page)
wooden plank rolls
(1) Twin
(2) Full/Queen/
King/California King
(6) 1” x 5/16” bolts
(4) corner brackets
for all sizes
(2) side rails
for all sizes
horizontal support rail
(1) Twin, Full, and Queen
(3) King and California King
(2) end rails
for all sizes
support legs
(1) Twin
(4) Full
(5) Queen
(6) King/California King
(1) upholstered foot rail
for all sizes
(2) upholstered side rails
for all sizes
bed components cont.
(1) vertical support rail
for Full/Queen/King/ California King
(4) legs
for all sizes

1” x ¼” bolts
(5) Twin
(15) Full
(15) Queen
(19) King
(19) California King
¼” bolts
(10) Twin
(10) Full
(10) Queen
(14) King
(14) California King
¾” washer
(smaller center)
(1) Twin
(7) Full
(7) Queen
(11) King
(11) California King
¼” nuts
(14) Twin
(21) Full
(20) Queen
(27) King
(27) California King
(1) wrench
for all sizes
bed hardware
(4) ¾” washer
(larger center)
for all sizes
(4) ¾” x 5/16” bolts
for all sizes
(2) L Brackets
for all sizes
(8) ¾” screws
for all sizes
(1) 5/32” L wrench
for all sizes
(1) 3/16” L wrench
for all sizes
LIMITED WARRANTY
SKYLINE FURNITURE INC. guarantees
its upholstered furniture against defects in
construction for a period of one (1) year.
When a structural defect is brought to our
attention, we will repair or replace it at our
option at no charge to the customer (includes
parts and labor, not transportation costs).
Fabric wearability for upholstered furniture
is not covered by the warranty. Vacuum for
regular cleaning.
PLEASE DISPOSE OF PLASTIC BAG (S) AND
CARTON (S) RESPONSIBLY.
LIMITE DE GARANTIA
SKYLINE FURNITURE INC. garantiza
sus muebles tapizados contra defectos en
construccion por un periodo de un (1) ano.
Cuando un problema de estructura es traido
a nuestra atencion, nosotros repararemos o
remplazaremos sin ningun cargo a nuestro
cliente (incluye partes y trabajo, no costo en
transportacion). Descoloramiento del materi-
al de muebles tapizados no es cubierto por la
garantia. Regularmente puede aspirar.
POR FAVOR TIRAR BOLSA (S) Y CAJA (S)
RESPONSABLEMENTE.
GARANTIE LIMITÉE
SKYLINE FURNITURE INC. garantit ses
meubles rembourrés contre les défauts de
construction pendant une période d’un (1)
an. Lorsqu’un vice de construction nous est
signalé, nous réparons ou remplaçons le
meuble, selon notre choix, sans frais pour le
client (incluant les pièces et la main-d’oeu-
vre, mais excluant les frais de transport). La
durabilité du tissu des meubles rembourrés
n’est pas couverte par la garantie. Nettoyer
régulièrement avec un aspirateur.
VEUILLEZ JETER LE OU LES SAC(S)
EN PLASTIQUE ET BOÎTE(S) DE FAÇON
RESPONSABLE.
If you have any questions, please call us at 1.800.542.7553

1. Attach side rail and end
rail to corner bracket.
Make sure to align holes
and snap into thinner slot.
Continue this action until
you have a rectangular
frame.
2. Attach corners to rails using
(8) ¼” bolts and (8) ¼” nuts.
Step 1
1
2
Step 2
Attach legs to rails using
(4) ¾” x 5/16” bolts and
(4) ¾” washers.

For Full, Queen, King, and
California King, attach vertical
support rail using (2) 1¼”
bolts, (2) small washers, and
(2) ¼” nuts. Make sure to
attach the vertical support rail
above the horizontal support
rail.
Note:
Twin beds do not have vertical rails or extra
support legs.
Step 3
Attach horizontal support rail
using (2) ¼” bolts and
(2) ¼” nuts. Make sure to
attach the horizontal support
rail underneath the bed frame.
Note:
King and California King have 3 horizontal
support rails, and therefore (6) 1/4” bolts and
(6) 1/4” nuts.
Step 4

Attach each support leg to the
horizontal & vertical support
rails using (1) 1” x ¼” bolts and
(1) ¾” washer.
Note:
Twin = 1 support leg
Full = 4 support legs
Queen = 5 support legs
King/California King = 6 support legs
Step 5
Step 6
(Queen image displayed)
For Full, King, and Cal King:
Attach vertical support rail to
horizontal support rails using
1” x ¼” bolts, ¾” washers, and
¼” nuts. For Twin and Queen
skip to step 7.
(Full, King, and Cal King image displayed)

Step 7
Step 8
Note:
Twin= 1 wooden plank roll
Full/Queen/King/California King =
2 wooden plank rolls
(Queen image displayed)
1. Use (6) 1” x 5/16” bolts,
(6) 1 ¼” washers to attach
upholstered rails to bed frame
loosely. Attach side rails before
securing the foot rail.
2. Push side rails towards foot
rail, so that there is no gap.
3. Once side rails and foot rail
have been aligned, tighten all
bolts, being careful not to over
tighten.
Place one of the wooden
plank rolls into the bed
frame. Attach using
(4) 1” x ¼” bolts and (4) ¼”
nuts. Repeat for other side.
2

Step 9
Connect assembled bed to
your headboard. Attach pieces
using (4) 1” x ¼” bolts, (8) 1¼”
washers*, and (4) ¼” nuts.
* Use a washer on each side of the metal
legs when attaching headboard to the
bed frame.
(image may vary from actual item)
Step 10
With a phillips screwdriver,
attach (2) L brackets and
(8) ¾” self-tapping screws in
the corners of the foot rail. This
is needed to increase stability of
upholstered rails.