Smart Comfort PAVILION LOUNGE 581210 User manual

ASSEMBLY INSTRUCTIONS
www.synargy.com
PAVILION LOUNGE
MODEL: 581210
Step 1
Assemble this product in an open space with room to move. Remove the packaging from the
product. The seat backs are packaged individually. Keep note of which seat back goes with
which base piece. Set aside the power supply and cables in a safe location for Step 8.
Safety Instructions
• This product is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the product by a person responsible
for their safety.
• Ensure there is no person, animal or item obstructing the area under
the footrest before operating this product.
• Improper use or installation may result in the risk of fire, electric shock
and/or injury. We assume no liability for any eventual damages caused
by improper use or inappropriate handling, or by any other non-com-
pliance with the instructions in this manual.
• Children should be supervised to ensure that they do not play with
the product.
• This product contains moving parts. Keep fingers, hair and body
parts well clear from moving parts. To reduce the risk of injury, keep
children and pets clear of the product when in use.
Electrical Instructions
• Never force the back or footrest to close faster than the electric motor.
• Before commencing cleaning or maintenance, ensure this product is
disconnected from the power outlet and the back is in the full upright
position.
• Disconnect this product from the power outlet before moving.
• Cease operation and disconnect from the power outlet if you ever
detect a burning odour or smoke coming from the product.
• Do not operate this product if liquid spillage occurs on or around it.
Disconnect from the power outlet and allow product to completely dry
before reconnecting.
• Do not sit or place additional weight on the arms, back or open
footrest.
• This product is very heavy. Only move this product by lifting the main
body. Never drag by the footrest, back or arm rest.
• Return this product to the full upright position to stand safely and
prevent a tripping hazard.
• Do not operate this product if damage is visible in any form.
• Do not modify or use unauthorised substitute parts.
• This product has been designed and intended for indoor residential
use only. It is not suitable for commercial or outdoor use.
• This product is not intended to be used as part of a health care plan.
Consult your medical professional before operating if you are taking
medication or have physical limitations.
• Do not operate the power functions or charge station with wet
hands.
• Check the condition of the power cord, electrical cords, transformer,
plug and connector on a monthly basis. Do not operate if wear is
visible.
• Ensure the power cord, electrical cords and transformer are clear of
moving parts and not trapped underneath the base.
• Position the power cord to minimise a tripping hazard.
• Never attempt to open or disassemble electrical components.
• We recommend the use of a surge protector (not included).
Synargy is a registered responsible supplier on ERAC. Electrical components within our products have been tested to comply with legal
requirements imposed for electrical safety and EMC.
Pavilion Lounge Range
The components are heavy, assembly should be performed by two people.
If you have any diculty with assembly or operation, please contact the store of purchase in the first instance.
Please read the below safety & electrical instructions before operating
Step 2
Chaise piece only. 2 seater and recliner chair can skip this step.
The feet for the chaise piece are located in a zippered pocket underneath. Retrieve them and
attach the feet to the suite per diagram:

ASSEMBLY INSTRUCTIONS
www.synargy.com
PAVILION LOUNGE
MODEL: 581210
Step 3
Connect the individual base pieces together using the connectors down the side of each seat
Scan QR code
for a video of
Step 5
Step 8
Connect the power supply to the back corner of the suite and plug into a wall outlet.
Step 6
Connect the cable between the seat back and base. Velcro the flap on the seat back to the base.
Step 7
Locate the wing boxes that were packaged with the seat backs, and follow the below to attach
them to the lounge suite:
Step 4
Connect the electrical cables at the back of the seat between each base.
Step 5
Attach the seat backs and velcro the flap on the seat back to the base. Scan the QR code to
view a video of this step.