Smart eCare BT-RS232-2 User manual

Product: Smart eCare Bluetooth Dongle
Trade Name: Smart eCare
Model Number: BT-RS232-2
Smart eCare Bluetooth Dongle
User Manual (Version 1, Nov 2017)
Please read before use and follow the instructions within
■Product Info
This product’s primary use is to receive and transmit data created within certain
devices; through this Bluetooth connection method, data are transmitted to mobile
devices (ex. smartphones, PDAs or tablets). It provides users an easy method to
receive and transmit data.
■ Product Exterior
1. Bluetooth Indicator Lights
Blue flashing light: standby
Blue stable light: transmitting data
2. Power On/Off Switch
3. DTE/DCE Switch
4. Charging Indicator Light
Red light: charging
Green light: fully charged
5. Speaker
6. Micro-USB Interface
7. RS232 Connector & Interface
■ Warnings & Precautions
1. Use this device ONLY for the intended use described in this manual
2. This product is intended ONLY for professional use (interpretation and
analysis).
3. Please do not use in an environment high in temperature and/ or moisture.
4. Please use dry alcoholic cotton wipes to clean the product surface. Please do
not use corrosive or undiluted cleaning agents or un-wringed wipe cloth to clean
the product’s surface. Please do not submerge the product within any liquid or
allow liquid to flow into the device.
5. Before use, please stabilize the product or place it on a flat surface to avoid
potential drop and damage.

6. Please use with caution as drops or impact may cause device malfunction.
7. Please do not replace, forcibly remove or damage the product. To maintain
the quality of the product, please ONLY replace the same brand or
manufacturer recommended parts to ensure the operational running
efficiency.
8. Please follow the local legislation when disposing the device.
■Packaged Content
Bluetooth Dongle x 1
Power Adapter x 1
User Manual x 1
Please check to see if the package is complete with the above. If there are damage(s)
or shortage(s), please contact your local dealer for assistance.
■Method of Use
Before use, please check if you have installed the application upon your mobile
device. The device must have Bluetooth function and be within its scanning range.
Step 1: Connect the Bluetooth dongle’s Micro-USB interface with the power adapter
then plug it into the electrical outlet. The RS232 connector will be plugged into the
medical device interface.
Step 2: Please slide the power switch right to activate the Bluetooth device. After
activation, the Bluetooth Indicator light will have a constant flashing blue light.
Step 3: Once the Bluetooth function is activated upon the mobile device, one can pair
and connect the devices. Once pairing is completed, the Bluetooth indicator light will
have a constant blue light to indicate device is currently in transmission mode.
Step 4: Start operating using Smart eCare’s application system.
Step 5: If you need to remove the Bluetooth dongle for any reason, please slide the
power switch left first before disconnecting.
■ Symbol Information
Symbol
Definition
Please refer to the instructions
Temperature limitation
Caution, please consult accompanying
documents
Moisture limitation
Electronics recycling symbol

■Product Specifications
Model: BT-RS232-2
Dimensions: 58 (L) x55 (W) x 16.4 (H) mm
Weight: 82g
RS232 Cable Length: 248mm
BT: Bluetooth V4.0
IP Level: IPX2
External Power Source: DC5V/500mAh
Batteries: rechargeable lithium battery，3.7V/600mAh
Operating condition: 5℃~40℃，15~90%RH
Storage environment: -5℃~35℃，10~90%RH
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
RF exposure warning
The equipment complies with FCC RF exposure limits set forth for an uncontrolled
environment. The equipment must not be co-located or operating in conjunction with any

other antenna or transmitter.
Distributor: Smart eCare Inc.
Distributor Address: 1 F, No. 10, Ln. 138, Ren-ai St., Yongkang Dist., Tainan City
710, Taiwan (R.O.C)
Manufacturer Name & Address: Smart eCare Inc. commissioned TaiDoc Technology
Corporation Wugu Factory (B1-7F, No. 127, Wugong 2nd Rd.,Wugu Dist., 24888 New
Taipei City, Taiwan (R.O.C) for manufacturing.