smart home SH - CT4R User manual

MODEL: SH - CT4R
by Bkav

www.smarthome.bkav.com
UGCT4R/V2.0/0615
893604393UGCT4R
Mfr Code:
Copyright © 2015 Bkav SmartHome Co., Ltd. All rights reserved.

Bkav SmartHome technology company limited
USER GUIDE
4-CHANNEL CONTROLLER
SH - CT4R

Electric shock may cause injuries or threats to life.
Before installing, repairing or cleaning the device,
you should check whether the device’s power is
disconnected.
This work should be done by technicians or
Customer Contact Center to avoid electric related
accidents.
Environmental regulations must be complied when
discarding or recycling the device or its wrapping.
Thank you for choosing 4-channel controller SH - CT4R
of Bkav SmartHome. By selecting Bkav SmartHome’s
products, you will get the best warranty service and
installation support from our technicians.
This document gives useful information during installation
and usage time. You should read and keep the manual
carefully in case of need.
1
Warning
Usage notice

Copyright © 2015 Bkav SmartHome Co., Ltd. All rights reserved.
4-channel controller SH - CT4R is the product of Bkav
SmartHome and has been registered regarding design,
utility solutions and quality certification. All violations such as
copies of design and product idea are subject to the current
copyright law of the Socialist Republic of Vietnam.
2

Usage notice
Safety instruction
Introduction
General introduction
Product package
Specifications
Wiring diagram
Installation instruction
Device usage
Function of direct control
Use remote control SH - RM6
Contact
1
4
5
5
6
7
8
9
12
13
13
16
3
Table of contents

Warning
Do not use voltage which is different from the one
stated in the device’s specifications.
Disconnect the device’s power prior to any
installation, disassembly or repair.
Do not leave the device in high-temperature
environment.
Do not disassemble the device if not necessary.
Do not clean the device with corrosive chemicals.
Safety instruction should be complied during the
device usage.
4Safety instruction

General introduction
Touch switch SH - CT4R supports turn-on/off of 4 power
channels and remote control SH - RM6 (*).
With the capacitive touch technology, anti-scratch Gorilla
Glass, remote control support, unibody aluminum, the device
will make your house more convenient and luxurious.
The device is designed to easily replace traditional switches
without making many changes of houses’ infrastructure.
The device is suitable to control lights, automatic curtains
and venetian blinds, etc.
(*) Remote control SH - RM6 is sold separately, not
included in the device. You can purchase to use.
5
Introduction

Product package
Touch-screen
control panel
Power circuit
box
Receptacle box
Remote control
SH - RM6
(additional purchase)
User guide
(book)
Signal connecting
cable and set
of screws
6
MODEL: SH - CT4R
by Bkav
SET

Specifications
Operating voltage:
Power rating:
100-240V 50/60Hz
97 x 93 x 8.6 mm
120 gram
5A max
Operating temperature:
Dimensions:
Weight:
60ºC max
7

Made by SmartHome
COM
2.0
COM
1.0
OUT
2.2
OUT
2.1
OUT
1.2
OUT
1.1
L
100-240
VAC
N
Voltage:
Power rating:
Operating temperature:
Disconnect the device’s power
prior to any installation.
100-240V 50/60Hz
5A max
60ºC max
Made in Vietnam
by Bkav
4-channel controller
Model: SH - CT4R - P
N
L
Wiring diagram
8
Neutral
Line

1
9
Unconnected wire
Power circuit box
Receptacle box
3
2
1
Installation instruction
Step 1: Connect unconnected wires (2) from receptacle box
(1) to power circuit box (3) as in Figure 1 based on the wiring
diagram in page 8.

2
Step 2: Follow the arrow’s direction to insert power circuit
box (3) into receptacle box (1), tighten 4 M4 screws (4) as
shown in Figure 2.
10
Notice: Connector must be installed upwards.
M4 screw
Receptacle box
Power circuit box
Connector
3
4
1

3
Step 3: Connect connecting cable (5) to power circuit box (3),
then connect another cable’s head with touch-screen control
panel (6). Push touch-screen control panel (6) towards power
circuit box (3).
Notice: The green part of the connecting cable’s head
must be in an upward direction on connecting.
11
Receptacle box
Power circuit box
Connecting cable
Touch-screen
control panel
3
1
5
6

Touch control button
Status indicator light
Infrared port
12
Device usage

Function of direct control
Use remote control SH - RM6
SH - CT4R uses the capacitive touch technology to turn
on/off electric devices just by gently tapping on the
corresponding icon on the glass. The indicator below the
icon is on, the corresponding status of the device is on. The
indicator below the icon is off, the corresponding status of
the device is off.
13
You can make additional purchase of remote control SH - RM6
in case of need.
With the remote control feature, SH - CT4R can receive
commands by pressing the corresponding buttons on the
remote control, which helps users remotely turn on/off the
device when necessary.

14
Press button < > to turn on/off the device 1.
Press button < > to turn on/off the device 2.
Press button < > to turn on/off the device 3.
Press button < > to turn on/off the device 4.
Press button < > to turn on/off all the devices.
SET
The device 2
The device 3The device 4
SH - CT4R SH - RM6
The device 1
SET
1
2
3
4
1
2
3
4

15
Notice:
When all the device’s channels are turned off manually
during use, press button < > all the channels will be
turned on.
When one of the device’s 4-channel is on, press button
< > the channels which are currently on will be off.
Pressing button < > again, only the channels which
are off earlier will be turned on. It is a smart feature of
the device.
SET
SET
SET

16 Contact
If there is any problem related to the product, please contact
Customer Contact Center:
Customer Contact Center: ([phone]
Email: [e-mail]

The new home standard !