ADTRAN NetVanta 2000 Series User manual

Technical Support 1-888-4ADTRAN (1-888-423-8726)
NetVanta 2000 Series Routers
Quick Start Guide 61202361L2-13B February 2004
• Category 5 - UTP crossover (XOver) and/or straight-through (ST) cables, as required, for connecting to existing
network
• A PC with an Internet browser (IE 5.5 or greater) for configuring the unit
Each NetVanta 2000 is shipped in its own cardboard shipping carton. Open each carton carefully and avoid deep pen-
etration into the carton with sharp objects.
In this document, the term “NetVanta 2000” means any Internet Security Appliance in the NetVanta 2000
series (e.g., NetVanta 2100, NetVanta 2300, etc.). Statements not intended for all devices in the series
will reference that device individually. Part numbers include the following:
1202361L1 (NetVanta 2100), 1202362L1/L2 (NetVanta 2050), 1202363L1/L2 (NetVanta 2054),
1202366L2 (NetVanta 2300), and 1202367L2 (NetVanta 2400)
Tools Required
Typical Network Diagram
1Unpacking and Inspecting the System
PUB: IP 13.13.13.1
Mask 255.255.255.254
SOHO Corp HQ
NetVanta 2300
NetVanta 2100
DSL/
Cable Modem
PRIV: IP 10.10.10.1
Mask 255.255.255.0
PWR STAT TD
VPN
RD TD RD TD RD
NetVanta 2100
WAN LAN
PWR STAT TD
VPN
RD TD RD
NetVanta 2100
WAN LAN
Switch Switch
ST STXOver
PUB: IP 12.12.12.1
Mask 255.255.255.254
PRIV1: IP 10.10.20.1
Mask 255.255.255.0
PWR STAT TD
VPN
RD TD RD TD RD
NetVanta 2100
WAN LAN
PWR STAT TD
VPN
RD TD RD
NetVanta 2100
WAN LAN
Power
Supply
Unit
Unit
OS
Documentation
CD
Crossover
Ethernet
Cable
Power
Cable
Brackets
and Screws
Warranty
Card

2 Technical Support 1-888-4ADTRAN (1-888-423-8726) 61202361L2-13B
The NetVanta 2000 can be accessed and managed via the PRIV interface using an Ethernet crossover cable (pro-
vided with the NetVanta 2050/2054/2100). Alternatively, the NetVanta 2000 may be accessed using a hub or switch
and two straight-through Ethernet cables (one for the PC and one for the NetVanta). Using a PC with an installed
browser (Internet Explorer 5.5 or greater for optimal viewing), the NetVanta can be configured using the Web GUI.
PUB connections are made in the same manner and with the same cabling considerations as PRIV connections.
1. Connect the NetVanta 2000 PRIV interface to the PC using the appropriate Ethernet cable.
2. Supply power to the PC and the NetVanta 2000 and begin the operating system boot up process. During boot up,
the PC obtains an IP address from the NetVanta 2000 DHCP server. (Alternatively, you could manually change
your IP address to 10.10.10.10, netmask 255.255.255.0. Refer to your specific operating system’s documentation
for details on that process.)
3. Open your installed browser and enter 10.10.10.1 in the URL field. The NetVanta 2000 login window appears.
4. Enter admin as the username, enter your admin password, and click the OK button. (The default password is
password.)
5. After logging in to the NetVanta 2000, the Interfaces page appears. Use the Getting Started page to walk through
the setup process.
2Connecting to the NetVanta
3Configuring the System
For security purposes, it is important to set up an admin password immediately. Use the Passwords
page of the Web GUI to change this password.
Ethernet Crossover Cable
NetVanta 2000 Series
PC
POWER
UPLINK 1 2 3 4
Ethernet Straight-Through Cable
Ethernet Hub or Switch
PC
NetVanta 2000 Series
Ethernet Straight-Through Cable
Direct Connection to PC or DSL/Cable Modem
Connection through Hub