D-Link DIR Series User manual

www.dlink.co.in
CONFIGURATION GUIDE
For DIR Series Routers

www. d l i n k.co.in
HOW TO ACCESS THE DEVICE
HOW TO CONFIGURE INTERNET
WIRELESS SETUP
Configuration Guide
for DIR series routers

Overview

HOW TO ACCESS THE DEVICE:-
Connect the power adapter to the
power socket and other end to the
device and power on the device.
2)
1)
Once the device is powered on,
power LED and the Wi-Fi LED on the
device will be green.
3)
4)
5)
Unbox the device.
Connect one end of the Ethernet
cable provided in to the box into any
of the 4 LAN port of the device at the
back side and connect other end to
the LAN port of your Desktop/Laptop.
Or you can connect to the device
wirelessly. Go to wireless utility of
your laptop. You will be able to view
the available wireless networks. By
Default wireless network name of
the device i.e. SSID is “dlink” and
there is no password in default
settings. Select the “dlink” SSID and
say “connect”, Kindly see the below
screenshot. After this you will be get
connected to the router.

HOW TO ACCESS THE DEVICE:-
6)
7)
8)
Then go to the web browser and type
http://192.168.0.1 in the address bar.
You will get the login page of the
router, the default username is
admin and there is no password in
default settings, leave the password
field blank.
You will get the current network
settings page of the device, which
will show you the status of internet,
wireless and mydlink.

HOW TO CONFIGURE THE INTERNET:-
• Set the device password
• Select time zone
• Select the type of internet
connection
• Save settings and connect.
Once you login into the device click
on the manual setup.
Click next to start the setup.
Go to Setup -> Internet connection
-> Internet connection setup Wizard
You will get the below screen and
there will be 4 steps
Setup Wizard
1)

HOW TO CONFIGURE THE INTERNET:-
2) Assign the password for the device
as shown below, click next.
3) Select the Indian Time zone and the
NTP server as shown below, click next.
4) It will prompt to select the WAN
connection mode, Auto and manual.
If you select auto it will automatically
detect the WAN connection type, we
will show you the manual. Click Next.
5) Select the type of connection
provided by ISP and click next. We
have selected the DHCP connection
(Dynamic IP address).

6) If there is a MAC clone policy from your
ISP then clone the MAC address of your
Router or the PC and click next.
7) Click on Connect.
8) Router will reboot and the settings
will get applied. Again Login into
the device and go to Status and
check the status of internet. You can
see Internet connection status,
DHCP client established and got the
IP address from the ISP.
HOW TO CONFIGURE THE INTERNET:-

1) Login into the router as shown earlier.
2) Current network setting page will
open, click on Manual Setup
3) Go to Setup -> Internet connection ->
Manual internet connection setup.
4) From the dropdown option of My
Internet connection select the type of
connection provided by your ISP. If there
is a MAC cloning policy from your ISP
then clone the MAC address of your
router or PC. Click on save settings.
HOW TO CONFIGURE THE INTERNET:-
Manual Internet Connection Setup:-

1) Login into the router with its default
IP address - http://192.168.0.1
username - admin
password - blank.
2) Go to Setup -> Wireless connection
-> Wireless Connection Setup Wizard.
3) It will ask you to set your wireless
network and wireless security
password. Click Next.
4) Give name to your wireless network
name also called as “SSID”, select
manually assign a network key and
check box Use WPA encryption
instead of WEP as shown below and
click next.
WIRELESS SETTINGS:-
Setup Wizard