Smart Life EBE-QPZ09 User manual

Smart Life

Instruction Manual of Smart Lamp
Model name: EBE-QPZ09
FCC ID: 2AJ3WEBEQPZ09

NO.1 Download and install Smart Life App
Use your phone to scan the QR code below or search “Smart Life” in
application market to download and install the App

NO.2 Register/Login/Request password
Register
If you don't have the account of Smart Life APP,register an account or sign in with cellphone number + verification
code.This page describes the Registration process.
1.Tap“Register”in the upper right（pic 1）
2.The system automatically determines your country / area.You can also select your country code by yourself.
Enter the cellphone number/E-mail and tap “Next” （pic 2）
3.If you enter the mobile cellphone number，enter the verification code in the message（pic 3），and enter the
password，tap"Confirm" to finish your registration.
4.If you enter the E-mail，enter the password （pic 4），tap”Confirm" to finish your registration.
Pic1 Pic2 Pic3 Pic4

NO.2 Register/Login/Request password
Account+password sign-in
1.The system will automatically determine your country /
area or you could select manually
2.Enter your registered cellphone number or email and
password, sign in to the system
Sign in with social media account
Sign-in with QQ or Wechat is supported in China. Sign-in
with Facebook or Twitter is supported overseas.

NO.2 Register/Login/Request password
Forgot password
If you forgot your account of Smart Life APP，you can reset the account password by “Request password”
1.Tap“Forgot password”，as shown in the picture 1
2.The system automatically determines your country / area.You can also select your country code by
yourself.Enter the cellphone number/E-mail and tap “Next”,as shown in the picture 2
3.Enter the verification code in the message/E-mail , as shown in the picture 3，and enter the new password
，tap"Confirm" to finish.
Pic 1 Pic 2 Pic 3

NO.3 Add device
1.Go to the App，on“Devices(Prepare)”，tap“+”in the
upper right of this page.to add device，as shown in
the picture
2.For quick connect mode, please make sure the
device’s instructor light quickly flashes,tap”nest
step”and go on to the next step
Remarks:
App provides two methods of network
connection: EZ mode and AP mode. Please use
default EZ mode. If it failed, please tap “AP
mode” in the upper right to try connecting again.

NO.3 Add device
Make sure device is under the status awaiting to be connected. If not, please reset the device by following the
methods below: Long press reset button for 5 seconds, indicator light is rapidly flashing (3 times/per second). It
indicates that device is reset and under Ez mode.
Remarks: If indicator light is slowly flashing (Once per 2s), it indicates that device is under AP mode. Long press
reset button for 5 seconds to switch the modes.

NO.3 Add device
Next step: confirm the WiFi for device connection and
enter the password. Tap “Next and start connecting
device. (remarks: only support 2.4G Wi-Fi network), as
shown in the picture.
Remarks:
The purpose of this step is: tell the device through which
router for Wi-Fi network connection. After successful setup,
the device will automatically connect to the Wi-Fi network
and realize receiving operation command and data report
remotely

NO.3 Add device-Ez mode
Pic 1 Pic 2
You could then view the connection status. Success notification interface will show after device is
successfully connected. Tap “finish” and the interface jump to the device list. Then you could start the
operation

1.When the current internet status is unstable, App interface will be shown as in the picture 1
2.Long press device’s reset button for 5 seconds or longer until the device’s Wi-Fi instructor
light slowly flashes, as shown in the picture 2
3.Make sure the Wi-Fi instructor light slowly flashes, tap “Confirm reset, switch to hotspot
mode” and go on to the next step
Pic 1 Pic 2
NO.3 Add device-Quick connect mode
Remarks:
Tap “ Add device” and “AP mode” in upper right to enter the
process

NO.3 Add device-Hotspot mode NO.3
Connect device hotspot: Tap “connect now” (or open setting-
wireless), connect hotspot named “SmartLife-XXXX”(normally it
can be connected directly, if password is required, please refer
to product instructions), return back to the App. App starts to
connect to device
Remarks:
Under AP mode, device works like a router. Smartphone could connect
to the hotspot sent by the device “SmartLife-xxxx”. Smartphone and
device could communicate and tell t to the device could receive he
router Wi-Fi/password through smartphone

NO.3 Add device-Hotspot mode
The App interface will go through the changes as shown in the picture 1. Picture 2 shows the App
interface when the network connection is successful
Pic 1 Pic 2
Remarks:
If connection is failed, please refer to the
FAQ. If you can’t find your answers, please
submit the user feedback in the APP. Our
staff will help you to solve the problems.

NO.3 Add device - Connection failure NO.3
If your App interface is shown as in the picture, it
means that the network connection failed. You
could try by connecting again or email us to get
immediate help.

NO.4 Control device
After the device is connected successfully,
tap “Devices” at the bottom. The device
name shows in the list. Tap it to enter the
control panel of the smart socket
Remarks:
When device is online, Operation via shortcuts is
supported;
When the device is offline, Device displays
“device is offline";
If is the device shared by others,a specific icon is
displayed.

NO.5 Smart life scene
1.Users can Free-combine devices to do tasks in smart life scene.Enjoy a better experience of
intelligent products.
2.Smart Life built for users Demo smart life scene (rest mode).Users can learn more about smart life
scene in the video ，tap “Perform” of Rest mode，as shown in the picture 2
Pic1 Pic2

NO.5 Smart life scene
Create a life scene ：
1.Tap“+”in the upper right of the page to create a
new smart life scene
2.Enter life scene name,add task,tap
“Save”,as shown in the picture.A smart life scene has
been created.
3.You can also change the scene you have already
created，change scene name，change task，delete
smart life scene.

NO.6 Profile
“My profile” is where users could manage
personal information. The key information is as
follows:
1.Personal information
2.Experience center：Display demo equipment
3.Device Sharing：your Information of shared devices
4.Message center
5.F.A.Q
6.Entry to submit feedback
7.About

NO.6 Profile
“Profile” page for displaying personal account
information.You can change login password, bound
cellphone number,set pattern unlock on this page.

NO.6 Profile
Tap“Pattern unlock” to set your pattern password.After setup,you have to enter your
pattern password before using.