Smart-M V2V Series User manual

HD-SDI/SDI to HDMI and Audio
Converter
V2V-SDHD
www.smartavi.com
Installation
Manual
What’s in the Box?
PART NO. QTY DESCRIPTION
V2V-SDHD 1 HD-SDI/SDI to HDMI and Audio Converter.
PS5VDC2A 1 5 Volt 2 Amp Power Supply
Technical Specications
OTHER
Power External 100-240 VAC/5VDC2A @10W
Dimensions 5 in W x 1 in H x 3.375 in D
Weight 0.5 lb
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95%
© Copyright 2012 SmartAVI, All Rights Reserved
NOTICE
The information contained in this document
is subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular purpose.
Smart-AVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced or
translated into another language without prior written consent
from Smart-AVI.
For more information, visit www.smartavi.com.
SmartAVI, Inc. / Twitter: smartavi
11651 Vanowen St. North Hollywood, CA 91605
Tel: [phone] Fax: [phone]
http://www.SmartAVI.com
Rack Mountable Option
Our SmartRack is the perfect solution to allow
virtually all SmartAVI devices to be custom mounted
in a standard 19” server rack. The SmartRack is fully
adjustable and can secure/organize several devices.
HDMI VIDEO
Format HDMI 1.3b [Deep Color, xvYcc color space
supported]
DVI Compliance Single-link DVI-D 1.1
HDCP Compliance 1.0/1.1
Video Bandwidth Single-link 340MHz [10.2Gbps]
Resolution 480i,480p,720i,720p,1080i,1080p
Output Interface (1) HDMI[7.1ch audio & video]
Connector Type A[19-pin female]
Maximum Distance 25 ft.
V2V FAMILY
AUDIO
Signal Type DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-
AC3/DSD
Output Interface 2-Channel RCA R/L Analog
HD-SDI/SDI VIDEO
Format SMPTE-259/292/296 Compliant
Input Interface BNC
Resolution 525i, 625i, 720p 50/59.94/60, 1080i
50/59.94/60
Output Interface BNC Loopback Equalized

V2V-SDHD
HD-SDI/SDI
INPUT
HDMI + AUDIO
MONITOR POST PRODUCTION
HD-SDI/SDI
SOURCE
HD-SDI/SDI
OUTPUT
Introduction
The V2V-SDHD enables you to connect your high-
denition HD-SDI or SDI devices to HDMI displays orTVs
with embedded HDMI audio. It also features 2-channel
RCA audio output for monitoring or connection to
external speakers. Often the display or TV will have poor
sound or no sound at all, requiring the additional audio
output. The V2V-SDHD also features a looping HD-SDI/
SDI connection that allows you to daisy chain the signal
to other outputs.This means that you can have multiple
HDMI displays playing the HD-SDI/SDI signal.
Applications
• Home Theater
• Presentation Rooms
• Conference Center Systems
• Camera Surveillance
• Video Phone
• Control Room Systems
• Recording Studio
Features
• Converts HD-SDI/SDI input signal to one HDMI 1.1
signal with embedded audio
• Also has 2-channel RCA Audio output
• Looping HD-SDI/SDI allows for daisy-chaining ad-
ditional equipment
• HDMI output : Supports up to 1080p/60HZ
• HDCP 1.3b protocol compliant
• Audio formats supported : DTS-HD/Dolby-trueHD/
LPCM7.1/DTS/Dolby-AC3/DSD
• Digital with no loss of quality
• Installs in minutes
Product - Installation Diagram
Installation
1. Connect an HD-SDI/SDI video input device to the
HD-SDI/SDI IN port on the rear of the V2V-SDHD.
2. Connect an HDMI display to the HDMI OUTPUT
port on the front of the V2V-SDHD.
3. Optionally connect speakers or a stereo receiver
with the AUDIO OUT ports on the V2V-SDHD.
4. Optionally connect additional HD-SDI/SDI output
devices to the HD-SDI/SDI OUT port on the V2V-
SDHD.
5. Connect the power cord to the V2V-SDHD.
6. Power on the input device and the display/
speakers.
V2V-SDHD Front
V2V-SDHD Rear