Smart Solar Sunjet 150 User manual

32
Anchor Sack
To prevent the pump moving around use the
anchor sack and line provided. Fill the sack
with stones and tie it to the pump, the length of
line can be altered to limit how far the pump
can move.
Solar Panel Mounting
Solar panel can be mounted using the
ground spike or wall/deck bracket. Slide
the pivot assembly onto the back of the
panel and then use with your selected
mounting option.
üû
Adjust solar panel angle to
maximise the amount of solar
energy collected.
Summer
0-30˚
Spring/Autumn
30-60˚
Position the solar panel so that it receives direct sunlight. The
fountain will not work if the solar panel is shaded. The fountain can
be placed anywhere within reach of the cable.
Solar Panel Position
Important!
Connection
ü
û
û
Connect the pump to the solar panel as shown .
Slightly twist the connectors when pushing together,
ensure the red sealing ring remains in it’s groove
and is not displaced.
0°C/32°F
û
üFrost can cause damage to the pump. The pump MUST be removed and
stored in a frost proof environment if the water is likely to freeze.
4-8"
10-20cm 8-16"
20-40cm
û
ü
û
Performance
This product is designed primarily to operate in summer months but will also work in spring and autumn
provided there is good sunshine. Performance is directly related to the amount and strength of sunlight
received.
4-8"
10-20cm 0-4"
0-10cm 4-12"
10-30cm
ü
0-4"
0-10cm
Frost

www.smartsolar.com
Sunjet 150
1© Smart Solar Ltd. V1.14
The Sunjet 150 can be placed under water or can float on the water surface. Your choice will depend on
the water depth and type of reservoir used. If the water depth is shallow we suggest the under water
assembly for deeper reservoirs or ponds you will need to use the floating assembly.
12
12
Assembly
Maintenance
Pump placed under water Pump floating on water surface
Filter cover can simply be pulled off as shown Remove filter material and rinse in water
Turn impeller cover to release as shown, impeller
can then be easily removed. Rinse all parts thoroughly in water.
To maintain optimum performance regularly
clean the solar panel using water or glass
cleaner in conjunction with a non abrasive
sponge or cloth.
We recommend that you regularly carry out maintenance to ensure optimum performance of your fountain.
1. Check the solar panel is positioned correctly, receiving sunlight and not in shade.
2. Check water level and ensure the pump is submerged.
3. Check connections between the pump and panel.
4. Clean all parts as shown and change water.
5. If problems persist contact customer services (refer to contact sheet or website).
Problem Solving