smart things Hub User manual

Welcome to your
Hub

Setup
1. Connect the SmartThings Hub to the wall power using
the supplied power cable.
Tip: The SmartThings Hub works best when placed
in a central location in your home. It should not be
placed on top of or immediately next to other
wireless devices.
USB
Power Reset
Network (Ethernet)

2.
3.
Tip: You can also connect the SmartThings Hub to your
Wi-Fi router using the supplied Ethernet cable.
Download the free SmartThings app for Android or
iOS, and create an account. Select the "Add device" card
and then select the "Hubs" category to connect your
SmartThings Hub.
Follow the on-screen instructions in the SmartThings
app to connect the Hub to your Wi-Fi network and
complete setup.
please visit Support.SmartThings.com for assistance.
Power Connector
Network Connector
AC Plug
(Optional)

Using your
Hub

Suggestions
There are many ways that you can use a SmartThings Hub as
the brain of your smart home:
Automate your lights, control your home’s temperature,
and help save money.
Teach your home a few new tricks and make life
a little bit easier.
Monitor, control, and help secure your home.
Visit SmartThings.com/Welcome for more ideas, tips, and
special offers.

Works with SmartThings
SmartThings works with a wide range of connected devices,
including lights, cameras, locks, thermostats, sensors,
and more.
Look for the Works with SmartThings label next time
you’re buying a connected device for your home, or visit
SmartThings.com to see the full list of compatible devices.
Revised 05/18. Copyright 2017. SmartThings, Inc. All rights reserved.
72°